Re: [PATCH v3 2/5] dt: bindings: add mt7621-clk device tree binding documentation

[Rob Herring <robh@xxxxxxxxxx>]

On Fri, Nov 13, 2020 at 04:46:29PM +0100, Sergio Paracuellos wrote:
> Adds device tree binding documentation for clocks in the
> MT7621 SOC.
> 
> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
> ---
>  .../bindings/clock/mediatek,mt7621-clk.yaml   | 61 +++++++++++++++++++
>  1 file changed, 61 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/mediatek,mt7621-clk.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7621-clk.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7621-clk.yaml
> new file mode 100644
> index 000000000000..363bd9880e29
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/mediatek,mt7621-clk.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/mediatek,mt7621-clk.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MT7621 Clock Device Tree Bindings
> +
> +maintainers:
> +  - Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
> +
> +description: |
> +  The MT7621 has a PLL controller from where the cpu clock is provided
> +  as well as derived clocks for the bus and the peripherals. It also
> +  can gate SoC device clocks.
> +
> +  Each clock is assigned an identifier and client nodes use this identifier
> +  to specify the clock which they consume.
> +
> +  All these identifiers could be found in:
> +  [1]: <include/dt-bindings/clock/mt7621-clk.h>.
> +
> +properties:
> +  compatible:
> +    const: mediatek,mt7621-clk
> +
> +  ralink,sysctl:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      phandle to the syscon which is in the same address area with syscon
> +      device.
> +
> +  "#clock-cells":
> +    description:
> +      The first cell indicates the clock gate number, see [1] for available
> +      clocks.
> +    const: 1
> +
> +  clock-output-names:
> +    maxItems: 8
> +
> +required:
> +  - compatible
> +  - ralink,sysctl
> +  - '#clock-cells'
> +  - clock-output-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/mt7621-clk.h>
> +
> +    pll {
> +      compatible = "mediatek,mt7621-clk";
> +      ralink,sysctl = <&sysc>;

If this is the only control interface, then make this a child of 'sysc'. 
And use 'reg' if there's a dedicated range of registers.

> +      #clock-cells = <1>;
> +      clock-output-names = "xtal", "cpu", "bus",
> +                           "50m", "125m", "150m",
> +                           "250m", "270m";
> +    };
> -- 
> 2.25.1
>