On Tue, Nov 17, 2020 at 01:55:06AM +0800, 周琰杰 (Zhou Yanjie) wrote: > v1->v2: > 1.Add the otg_power node for otg_phy's vcc_supply. > 2.Move assigned-clocks in the otg node into the cgu node. > 3.Move the position of the SSI node. > 4.Select CONFIG_JZ4780_EFUSE as default. > > 周琰杰 (Zhou Yanjie) (2): > MIPS: Ingenic: Add missing nodes for Ingenic SoCs and boards. > MIPS: Ingenic: Refresh defconfig for Ingenic SoCs based boards. > > arch/mips/boot/dts/ingenic/ci20.dts | 45 +++++++++++++++++++-- > arch/mips/boot/dts/ingenic/cu1000-neo.dts | 62 ++++++++++++++++++++++++++--- > arch/mips/boot/dts/ingenic/cu1830-neo.dts | 66 ++++++++++++++++++++++++++++--- > arch/mips/boot/dts/ingenic/jz4780.dtsi | 45 ++++++++++++++++++++- > arch/mips/boot/dts/ingenic/x1000.dtsi | 56 +++++++++++++++++++++++++- > arch/mips/boot/dts/ingenic/x1830.dtsi | 58 ++++++++++++++++++++++++++- > arch/mips/configs/ci20_defconfig | 15 ++++++- > arch/mips/configs/cu1000-neo_defconfig | 28 ++++++++++--- > arch/mips/configs/cu1830-neo_defconfig | 32 +++++++++++---- > 9 files changed, 374 insertions(+), 33 deletions(-) series applied to mips-next. Thomas. -- Crap can work. Given enough thrust pigs will fly, but it's not necessarily a good idea. [ RFC1925, 2.3 ]
