[PATCH 11/14] mips: bmips: bcm6358: include and use dt-bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now that there are proper device tree bindings we can start using them.

Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
---
 arch/mips/boot/dts/brcm/bcm6358.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi b/arch/mips/boot/dts/brcm/bcm6358.dtsi
index f21176cac038..d149d062be80 100644
--- a/arch/mips/boot/dts/brcm/bcm6358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi
@@ -1,4 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include "dt-bindings/clock/bcm6358-clock.h"
+#include "dt-bindings/interrupt-controller/bcm6358-interrupt-controller.h"
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -96,7 +100,7 @@ uart0: serial@fffe0100 {
 			reg = <0xfffe0100 0x18>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <2>;
+			interrupts = <BCM6358_IRQ_UART0>;
 
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
@@ -109,7 +113,7 @@ uart1: serial@fffe0120 {
 			reg = <0xfffe0120 0x18>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <3>;
+			interrupts = <BCM6358_IRQ_UART1>;
 
 			clocks = <&periph_clk>;
 			clock-names = "refclk";
@@ -122,7 +126,7 @@ ehci: usb@fffe1300 {
 			reg = <0xfffe1300 0x100>;
 			big-endian;
 			interrupt-parent = <&periph_intc>;
-			interrupts = <10>;
+			interrupts = <BCM6358_IRQ_EHCI>;
 			status = "disabled";
 		};
 
@@ -132,7 +136,7 @@ ohci: usb@fffe1400 {
 			big-endian;
 			no-big-frame-no;
 			interrupt-parent = <&periph_intc>;
-			interrupts = <5>;
+			interrupts = <BCM6358_IRQ_OHCI>;
 			status = "disabled";
 		};
 	};
-- 
2.28.0




[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux