Signed-off-by: Aaron Wu <aaron.wu@xxxxxxxxxx> Remove Blackfin input support --- drivers/input/keyboard/Kconfig | 9 - drivers/input/keyboard/Makefile | 1 - drivers/input/keyboard/bf54x-keys.c | 396 ------------------------------ drivers/input/misc/Kconfig | 9 - drivers/input/misc/Makefile | 1 - drivers/input/misc/bfin_rotary.c | 294 ---------------------- include/linux/platform_data/bfin_rotary.h | 117 --------- 7 files changed, 827 deletions(-) delete mode 100644 drivers/input/keyboard/bf54x-keys.c delete mode 100644 drivers/input/misc/bfin_rotary.c delete mode 100644 include/linux/platform_data/bfin_rotary.h diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 4c4ab1c..2b469cc 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -157,15 +157,6 @@ config KEYBOARD_QT2160 This driver can also be built as a module. If so, the module will be called qt2160. -config KEYBOARD_BFIN - tristate "Blackfin BF54x keypad support" - depends on (BF54x && !BF544) - help - Say Y here if you want to use the BF54x keypad. - - To compile this driver as a module, choose M here: the - module will be called bf54x-keys. - config KEYBOARD_CLPS711X tristate "CLPS711X Keypad support" depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST) diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 526e682..8fab920 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o obj-$(CONFIG_KEYBOARD_BCM) += bcm-keypad.o -obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c deleted file mode 100644 index 8a07a42..0000000 --- a/drivers/input/keyboard/bf54x-keys.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * File: drivers/input/keyboard/bf54x-keys.c - * Based on: - * Author: Michael Hennerich <hennerich@xxxxxxxxxxxxxxxxxxxx> - * - * Created: - * Description: keypad driver for Analog Devices Blackfin BF54x Processors - * - * - * Modified: - * Copyright 2007-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/module.h> - -#include <linux/fs.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/slab.h> -#include <linux/sched.h> -#include <linux/pm.h> -#include <linux/sysctl.h> -#include <linux/proc_fs.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/input.h> - -#include <asm/portmux.h> -#include <mach/bf54x_keys.h> - -#define DRV_NAME "bf54x-keys" -#define TIME_SCALE 100 /* 100 ns */ -#define MAX_MULT (0xFF * TIME_SCALE) -#define MAX_RC 8 /* Max Row/Col */ - -static const u16 per_rows[] = { - P_KEY_ROW7, - P_KEY_ROW6, - P_KEY_ROW5, - P_KEY_ROW4, - P_KEY_ROW3, - P_KEY_ROW2, - P_KEY_ROW1, - P_KEY_ROW0, - 0 -}; - -static const u16 per_cols[] = { - P_KEY_COL7, - P_KEY_COL6, - P_KEY_COL5, - P_KEY_COL4, - P_KEY_COL3, - P_KEY_COL2, - P_KEY_COL1, - P_KEY_COL0, - 0 -}; - -struct bf54x_kpad { - struct input_dev *input; - int irq; - unsigned short lastkey; - unsigned short *keycode; - struct timer_list timer; - unsigned int keyup_test_jiffies; - unsigned short kpad_msel; - unsigned short kpad_prescale; - unsigned short kpad_ctl; -}; - -static inline int bfin_kpad_find_key(struct bf54x_kpad *bf54x_kpad, - struct input_dev *input, u16 keyident) -{ - u16 i; - - for (i = 0; i < input->keycodemax; i++) - if (bf54x_kpad->keycode[i + input->keycodemax] == keyident) - return bf54x_kpad->keycode[i]; - return -1; -} - -static inline void bfin_keycodecpy(unsigned short *keycode, - const unsigned int *pdata_kc, - unsigned short keymapsize) -{ - unsigned int i; - - for (i = 0; i < keymapsize; i++) { - keycode[i] = pdata_kc[i] & 0xffff; - keycode[i + keymapsize] = pdata_kc[i] >> 16; - } -} - -static inline u16 bfin_kpad_get_prescale(u32 timescale) -{ - u32 sclk = get_sclk(); - - return ((((sclk / 1000) * timescale) / 1024) - 1); -} - -static inline u16 bfin_kpad_get_keypressed(struct bf54x_kpad *bf54x_kpad) -{ - return (bfin_read_KPAD_STAT() & KPAD_PRESSED); -} - -static inline void bfin_kpad_clear_irq(void) -{ - bfin_write_KPAD_STAT(0xFFFF); - bfin_write_KPAD_ROWCOL(0xFFFF); -} - -static void bfin_kpad_timer(struct timer_list *t) -{ - struct bf54x_kpad *bf54x_kpad = from_timer(bf54x_kpad, t, timer); - - if (bfin_kpad_get_keypressed(bf54x_kpad)) { - /* Try again later */ - mod_timer(&bf54x_kpad->timer, - jiffies + bf54x_kpad->keyup_test_jiffies); - return; - } - - input_report_key(bf54x_kpad->input, bf54x_kpad->lastkey, 0); - input_sync(bf54x_kpad->input); - - /* Clear IRQ Status */ - - bfin_kpad_clear_irq(); - enable_irq(bf54x_kpad->irq); -} - -static irqreturn_t bfin_kpad_isr(int irq, void *dev_id) -{ - struct platform_device *pdev = dev_id; - struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev); - struct input_dev *input = bf54x_kpad->input; - int key; - u16 rowcol = bfin_read_KPAD_ROWCOL(); - - key = bfin_kpad_find_key(bf54x_kpad, input, rowcol); - - input_report_key(input, key, 1); - input_sync(input); - - if (bfin_kpad_get_keypressed(bf54x_kpad)) { - disable_irq_nosync(bf54x_kpad->irq); - bf54x_kpad->lastkey = key; - mod_timer(&bf54x_kpad->timer, - jiffies + bf54x_kpad->keyup_test_jiffies); - } else { - input_report_key(input, key, 0); - input_sync(input); - - bfin_kpad_clear_irq(); - } - - return IRQ_HANDLED; -} - -static int bfin_kpad_probe(struct platform_device *pdev) -{ - struct bf54x_kpad *bf54x_kpad; - struct bfin_kpad_platform_data *pdata = dev_get_platdata(&pdev->dev); - struct input_dev *input; - int i, error; - - if (!pdata->rows || !pdata->cols || !pdata->keymap) { - dev_err(&pdev->dev, "no rows, cols or keymap from pdata\n"); - return -EINVAL; - } - - if (!pdata->keymapsize || - pdata->keymapsize > (pdata->rows * pdata->cols)) { - dev_err(&pdev->dev, "invalid keymapsize\n"); - return -EINVAL; - } - - bf54x_kpad = kzalloc(sizeof(struct bf54x_kpad), GFP_KERNEL); - if (!bf54x_kpad) - return -ENOMEM; - - platform_set_drvdata(pdev, bf54x_kpad); - - /* Allocate memory for keymap followed by private LUT */ - bf54x_kpad->keycode = kmalloc(pdata->keymapsize * - sizeof(unsigned short) * 2, GFP_KERNEL); - if (!bf54x_kpad->keycode) { - error = -ENOMEM; - goto out; - } - - if (!pdata->debounce_time || pdata->debounce_time > MAX_MULT || - !pdata->coldrive_time || pdata->coldrive_time > MAX_MULT) { - dev_warn(&pdev->dev, - "invalid platform debounce/columndrive time\n"); - bfin_write_KPAD_MSEL(0xFF0); /* Default MSEL */ - } else { - bfin_write_KPAD_MSEL( - ((pdata->debounce_time / TIME_SCALE) - & DBON_SCALE) | - (((pdata->coldrive_time / TIME_SCALE) << 8) - & COLDRV_SCALE)); - - } - - if (!pdata->keyup_test_interval) - bf54x_kpad->keyup_test_jiffies = msecs_to_jiffies(50); - else - bf54x_kpad->keyup_test_jiffies = - msecs_to_jiffies(pdata->keyup_test_interval); - - if (peripheral_request_list((u16 *)&per_rows[MAX_RC - pdata->rows], - DRV_NAME)) { - dev_err(&pdev->dev, "requesting peripherals failed\n"); - error = -EFAULT; - goto out0; - } - - if (peripheral_request_list((u16 *)&per_cols[MAX_RC - pdata->cols], - DRV_NAME)) { - dev_err(&pdev->dev, "requesting peripherals failed\n"); - error = -EFAULT; - goto out1; - } - - bf54x_kpad->irq = platform_get_irq(pdev, 0); - if (bf54x_kpad->irq < 0) { - error = -ENODEV; - goto out2; - } - - error = request_irq(bf54x_kpad->irq, bfin_kpad_isr, - 0, DRV_NAME, pdev); - if (error) { - dev_err(&pdev->dev, "unable to claim irq %d\n", - bf54x_kpad->irq); - goto out2; - } - - input = input_allocate_device(); - if (!input) { - error = -ENOMEM; - goto out3; - } - - bf54x_kpad->input = input; - - input->name = pdev->name; - input->phys = "bf54x-keys/input0"; - input->dev.parent = &pdev->dev; - - input->id.bustype = BUS_HOST; - input->id.vendor = 0x0001; - input->id.product = 0x0001; - input->id.version = 0x0100; - - input->keycodesize = sizeof(unsigned short); - input->keycodemax = pdata->keymapsize; - input->keycode = bf54x_kpad->keycode; - - bfin_keycodecpy(bf54x_kpad->keycode, pdata->keymap, pdata->keymapsize); - - /* setup input device */ - __set_bit(EV_KEY, input->evbit); - - if (pdata->repeat) - __set_bit(EV_REP, input->evbit); - - for (i = 0; i < input->keycodemax; i++) - if (bf54x_kpad->keycode[i] <= KEY_MAX) - __set_bit(bf54x_kpad->keycode[i], input->keybit); - __clear_bit(KEY_RESERVED, input->keybit); - - error = input_register_device(input); - if (error) { - dev_err(&pdev->dev, "unable to register input device\n"); - goto out4; - } - - /* Init Keypad Key Up/Release test timer */ - - timer_setup(&bf54x_kpad->timer, bfin_kpad_timer, 0); - - bfin_write_KPAD_PRESCALE(bfin_kpad_get_prescale(TIME_SCALE)); - - bfin_write_KPAD_CTL((((pdata->cols - 1) << 13) & KPAD_COLEN) | - (((pdata->rows - 1) << 10) & KPAD_ROWEN) | - (2 & KPAD_IRQMODE)); - - bfin_write_KPAD_CTL(bfin_read_KPAD_CTL() | KPAD_EN); - - device_init_wakeup(&pdev->dev, 1); - - return 0; - -out4: - input_free_device(input); -out3: - free_irq(bf54x_kpad->irq, pdev); -out2: - peripheral_free_list((u16 *)&per_cols[MAX_RC - pdata->cols]); -out1: - peripheral_free_list((u16 *)&per_rows[MAX_RC - pdata->rows]); -out0: - kfree(bf54x_kpad->keycode); -out: - kfree(bf54x_kpad); - - return error; -} - -static int bfin_kpad_remove(struct platform_device *pdev) -{ - struct bfin_kpad_platform_data *pdata = dev_get_platdata(&pdev->dev); - struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev); - - del_timer_sync(&bf54x_kpad->timer); - free_irq(bf54x_kpad->irq, pdev); - - input_unregister_device(bf54x_kpad->input); - - peripheral_free_list((u16 *)&per_rows[MAX_RC - pdata->rows]); - peripheral_free_list((u16 *)&per_cols[MAX_RC - pdata->cols]); - - kfree(bf54x_kpad->keycode); - kfree(bf54x_kpad); - - return 0; -} - -#ifdef CONFIG_PM -static int bfin_kpad_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev); - - bf54x_kpad->kpad_msel = bfin_read_KPAD_MSEL(); - bf54x_kpad->kpad_prescale = bfin_read_KPAD_PRESCALE(); - bf54x_kpad->kpad_ctl = bfin_read_KPAD_CTL(); - - if (device_may_wakeup(&pdev->dev)) - enable_irq_wake(bf54x_kpad->irq); - - return 0; -} - -static int bfin_kpad_resume(struct platform_device *pdev) -{ - struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev); - - bfin_write_KPAD_MSEL(bf54x_kpad->kpad_msel); - bfin_write_KPAD_PRESCALE(bf54x_kpad->kpad_prescale); - bfin_write_KPAD_CTL(bf54x_kpad->kpad_ctl); - - if (device_may_wakeup(&pdev->dev)) - disable_irq_wake(bf54x_kpad->irq); - - return 0; -} -#else -# define bfin_kpad_suspend NULL -# define bfin_kpad_resume NULL -#endif - -static struct platform_driver bfin_kpad_device_driver = { - .driver = { - .name = DRV_NAME, - }, - .probe = bfin_kpad_probe, - .remove = bfin_kpad_remove, - .suspend = bfin_kpad_suspend, - .resume = bfin_kpad_resume, -}; -module_platform_driver(bfin_kpad_device_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Michael Hennerich <hennerich@xxxxxxxxxxxxxxxxxxxx>"); -MODULE_DESCRIPTION("Keypad driver for BF54x Processors"); -MODULE_ALIAS("platform:bf54x-keys"); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 62a1312..e9770f5 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -655,15 +655,6 @@ config INPUT_DM355EVM To compile this driver as a module, choose M here: the module will be called dm355evm_keys. -config INPUT_BFIN_ROTARY - tristate "Blackfin Rotary support" - depends on BF54x || BF52x - help - Say Y here if you want to use the Blackfin Rotary. - - To compile this driver as a module, choose M here: the - module will be called bfin-rotary. - config INPUT_WM831X_ON tristate "WM831X ON pin" depends on MFD_WM831X diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index a8f61af..eb9c6c3 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_INPUT_ARIZONA_HAPTICS) += arizona-haptics.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH) += atmel_captouch.o -obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o obj-$(CONFIG_INPUT_BMA150) += bma150.o obj-$(CONFIG_INPUT_CM109) += cm109.o obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c deleted file mode 100644 index 799ce3d..0000000 --- a/drivers/input/misc/bfin_rotary.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * Rotary counter driver for Analog Devices Blackfin Processors - * - * Copyright 2008-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. - */ - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/pm.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/slab.h> -#include <linux/platform_data/bfin_rotary.h> - -#include <asm/portmux.h> - -#define CNT_CONFIG_OFF 0 /* CNT Config Offset */ -#define CNT_IMASK_OFF 4 /* CNT Interrupt Mask Offset */ -#define CNT_STATUS_OFF 8 /* CNT Status Offset */ -#define CNT_COMMAND_OFF 12 /* CNT Command Offset */ -#define CNT_DEBOUNCE_OFF 16 /* CNT Debounce Offset */ -#define CNT_COUNTER_OFF 20 /* CNT Counter Offset */ -#define CNT_MAX_OFF 24 /* CNT Maximum Count Offset */ -#define CNT_MIN_OFF 28 /* CNT Minimum Count Offset */ - -struct bfin_rot { - struct input_dev *input; - void __iomem *base; - int irq; - unsigned int up_key; - unsigned int down_key; - unsigned int button_key; - unsigned int rel_code; - - unsigned short mode; - unsigned short debounce; - - unsigned short cnt_config; - unsigned short cnt_imask; - unsigned short cnt_debounce; -}; - -static void report_key_event(struct input_dev *input, int keycode) -{ - /* simulate a press-n-release */ - input_report_key(input, keycode, 1); - input_sync(input); - input_report_key(input, keycode, 0); - input_sync(input); -} - -static void report_rotary_event(struct bfin_rot *rotary, int delta) -{ - struct input_dev *input = rotary->input; - - if (rotary->up_key) { - report_key_event(input, - delta > 0 ? rotary->up_key : rotary->down_key); - } else { - input_report_rel(input, rotary->rel_code, delta); - input_sync(input); - } -} - -static irqreturn_t bfin_rotary_isr(int irq, void *dev_id) -{ - struct bfin_rot *rotary = dev_id; - int delta; - - switch (readw(rotary->base + CNT_STATUS_OFF)) { - - case ICII: - break; - - case UCII: - case DCII: - delta = readl(rotary->base + CNT_COUNTER_OFF); - if (delta) - report_rotary_event(rotary, delta); - break; - - case CZMII: - report_key_event(rotary->input, rotary->button_key); - break; - - default: - break; - } - - writew(W1LCNT_ZERO, rotary->base + CNT_COMMAND_OFF); /* Clear COUNTER */ - writew(-1, rotary->base + CNT_STATUS_OFF); /* Clear STATUS */ - - return IRQ_HANDLED; -} - -static int bfin_rotary_open(struct input_dev *input) -{ - struct bfin_rot *rotary = input_get_drvdata(input); - unsigned short val; - - if (rotary->mode & ROT_DEBE) - writew(rotary->debounce & DPRESCALE, - rotary->base + CNT_DEBOUNCE_OFF); - - writew(rotary->mode & ~CNTE, rotary->base + CNT_CONFIG_OFF); - - val = UCIE | DCIE; - if (rotary->button_key) - val |= CZMIE; - writew(val, rotary->base + CNT_IMASK_OFF); - - writew(rotary->mode | CNTE, rotary->base + CNT_CONFIG_OFF); - - return 0; -} - -static void bfin_rotary_close(struct input_dev *input) -{ - struct bfin_rot *rotary = input_get_drvdata(input); - - writew(0, rotary->base + CNT_CONFIG_OFF); - writew(0, rotary->base + CNT_IMASK_OFF); -} - -static void bfin_rotary_free_action(void *data) -{ - peripheral_free_list(data); -} - -static int bfin_rotary_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - const struct bfin_rotary_platform_data *pdata = dev_get_platdata(dev); - struct bfin_rot *rotary; - struct resource *res; - struct input_dev *input; - int error; - - /* Basic validation */ - if ((pdata->rotary_up_key && !pdata->rotary_down_key) || - (!pdata->rotary_up_key && pdata->rotary_down_key)) { - return -EINVAL; - } - - if (pdata->pin_list) { - error = peripheral_request_list(pdata->pin_list, - dev_name(dev)); - if (error) { - dev_err(dev, "requesting peripherals failed: %d\n", - error); - return error; - } - - error = devm_add_action_or_reset(dev, bfin_rotary_free_action, - pdata->pin_list); - if (error) { - dev_err(dev, "setting cleanup action failed: %d\n", - error); - return error; - } - } - - rotary = devm_kzalloc(dev, sizeof(struct bfin_rot), GFP_KERNEL); - if (!rotary) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - rotary->base = devm_ioremap_resource(dev, res); - if (IS_ERR(rotary->base)) - return PTR_ERR(rotary->base); - - input = devm_input_allocate_device(dev); - if (!input) - return -ENOMEM; - - rotary->input = input; - - rotary->up_key = pdata->rotary_up_key; - rotary->down_key = pdata->rotary_down_key; - rotary->button_key = pdata->rotary_button_key; - rotary->rel_code = pdata->rotary_rel_code; - - rotary->mode = pdata->mode; - rotary->debounce = pdata->debounce; - - input->name = pdev->name; - input->phys = "bfin-rotary/input0"; - input->dev.parent = dev; - - input_set_drvdata(input, rotary); - - input->id.bustype = BUS_HOST; - input->id.vendor = 0x0001; - input->id.product = 0x0001; - input->id.version = 0x0100; - - input->open = bfin_rotary_open; - input->close = bfin_rotary_close; - - if (rotary->up_key) { - __set_bit(EV_KEY, input->evbit); - __set_bit(rotary->up_key, input->keybit); - __set_bit(rotary->down_key, input->keybit); - } else { - __set_bit(EV_REL, input->evbit); - __set_bit(rotary->rel_code, input->relbit); - } - - if (rotary->button_key) { - __set_bit(EV_KEY, input->evbit); - __set_bit(rotary->button_key, input->keybit); - } - - /* Quiesce the device before requesting irq */ - bfin_rotary_close(input); - - rotary->irq = platform_get_irq(pdev, 0); - if (rotary->irq < 0) { - dev_err(dev, "No rotary IRQ specified\n"); - return -ENOENT; - } - - error = devm_request_irq(dev, rotary->irq, bfin_rotary_isr, - 0, dev_name(dev), rotary); - if (error) { - dev_err(dev, "unable to claim irq %d; error %d\n", - rotary->irq, error); - return error; - } - - error = input_register_device(input); - if (error) { - dev_err(dev, "unable to register input device (%d)\n", error); - return error; - } - - platform_set_drvdata(pdev, rotary); - device_init_wakeup(dev, 1); - - return 0; -} - -static int __maybe_unused bfin_rotary_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct bfin_rot *rotary = platform_get_drvdata(pdev); - - rotary->cnt_config = readw(rotary->base + CNT_CONFIG_OFF); - rotary->cnt_imask = readw(rotary->base + CNT_IMASK_OFF); - rotary->cnt_debounce = readw(rotary->base + CNT_DEBOUNCE_OFF); - - if (device_may_wakeup(&pdev->dev)) - enable_irq_wake(rotary->irq); - - return 0; -} - -static int __maybe_unused bfin_rotary_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct bfin_rot *rotary = platform_get_drvdata(pdev); - - writew(rotary->cnt_debounce, rotary->base + CNT_DEBOUNCE_OFF); - writew(rotary->cnt_imask, rotary->base + CNT_IMASK_OFF); - writew(rotary->cnt_config & ~CNTE, rotary->base + CNT_CONFIG_OFF); - - if (device_may_wakeup(&pdev->dev)) - disable_irq_wake(rotary->irq); - - if (rotary->cnt_config & CNTE) - writew(rotary->cnt_config, rotary->base + CNT_CONFIG_OFF); - - return 0; -} - -static SIMPLE_DEV_PM_OPS(bfin_rotary_pm_ops, - bfin_rotary_suspend, bfin_rotary_resume); - -static struct platform_driver bfin_rotary_device_driver = { - .probe = bfin_rotary_probe, - .driver = { - .name = "bfin-rotary", - .pm = &bfin_rotary_pm_ops, - }, -}; -module_platform_driver(bfin_rotary_device_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Michael Hennerich <hennerich@xxxxxxxxxxxxxxxxxxxx>"); -MODULE_DESCRIPTION("Rotary Counter driver for Blackfin Processors"); -MODULE_ALIAS("platform:bfin-rotary"); diff --git a/include/linux/platform_data/bfin_rotary.h b/include/linux/platform_data/bfin_rotary.h deleted file mode 100644 index 9882937..0000000 --- a/include/linux/platform_data/bfin_rotary.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * board initialization should put one of these structures into platform_data - * and place the bfin-rotary onto platform_bus named "bfin-rotary". - * - * Copyright 2008-2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef _BFIN_ROTARY_H -#define _BFIN_ROTARY_H - -/* mode bitmasks */ -#define ROT_QUAD_ENC CNTMODE_QUADENC /* quadrature/grey code encoder mode */ -#define ROT_BIN_ENC CNTMODE_BINENC /* binary encoder mode */ -#define ROT_UD_CNT CNTMODE_UDCNT /* rotary counter mode */ -#define ROT_DIR_CNT CNTMODE_DIRCNT /* direction counter mode */ - -#define ROT_DEBE DEBE /* Debounce Enable */ - -#define ROT_CDGINV CDGINV /* CDG Pin Polarity Invert */ -#define ROT_CUDINV CUDINV /* CUD Pin Polarity Invert */ -#define ROT_CZMINV CZMINV /* CZM Pin Polarity Invert */ - -struct bfin_rotary_platform_data { - /* set rotary UP KEY_### or BTN_### in case you prefer - * bfin-rotary to send EV_KEY otherwise set 0 - */ - unsigned int rotary_up_key; - /* set rotary DOWN KEY_### or BTN_### in case you prefer - * bfin-rotary to send EV_KEY otherwise set 0 - */ - unsigned int rotary_down_key; - /* set rotary BUTTON KEY_### or BTN_### */ - unsigned int rotary_button_key; - /* set rotary Relative Axis REL_### in case you prefer - * bfin-rotary to send EV_REL otherwise set 0 - */ - unsigned int rotary_rel_code; - unsigned short debounce; /* 0..17 */ - unsigned short mode; - unsigned short pm_wakeup; - unsigned short *pin_list; -}; - -/* CNT_CONFIG bitmasks */ -#define CNTE (1 << 0) /* Counter Enable */ -#define DEBE (1 << 1) /* Debounce Enable */ -#define CDGINV (1 << 4) /* CDG Pin Polarity Invert */ -#define CUDINV (1 << 5) /* CUD Pin Polarity Invert */ -#define CZMINV (1 << 6) /* CZM Pin Polarity Invert */ -#define CNTMODE_SHIFT 8 -#define CNTMODE (0x7 << CNTMODE_SHIFT) /* Counter Operating Mode */ -#define ZMZC (1 << 1) /* CZM Zeroes Counter Enable */ -#define BNDMODE_SHIFT 12 -#define BNDMODE (0x3 << BNDMODE_SHIFT) /* Boundary register Mode */ -#define INPDIS (1 << 15) /* CUG and CDG Input Disable */ - -#define CNTMODE_QUADENC (0 << CNTMODE_SHIFT) /* quadrature encoder mode */ -#define CNTMODE_BINENC (1 << CNTMODE_SHIFT) /* binary encoder mode */ -#define CNTMODE_UDCNT (2 << CNTMODE_SHIFT) /* up/down counter mode */ -#define CNTMODE_DIRCNT (4 << CNTMODE_SHIFT) /* direction counter mode */ -#define CNTMODE_DIRTMR (5 << CNTMODE_SHIFT) /* direction timer mode */ - -#define BNDMODE_COMP (0 << BNDMODE_SHIFT) /* boundary compare mode */ -#define BNDMODE_ZERO (1 << BNDMODE_SHIFT) /* boundary compare and zero mode */ -#define BNDMODE_CAPT (2 << BNDMODE_SHIFT) /* boundary capture mode */ -#define BNDMODE_AEXT (3 << BNDMODE_SHIFT) /* boundary auto-extend mode */ - -/* CNT_IMASK bitmasks */ -#define ICIE (1 << 0) /* Illegal Gray/Binary Code Interrupt Enable */ -#define UCIE (1 << 1) /* Up count Interrupt Enable */ -#define DCIE (1 << 2) /* Down count Interrupt Enable */ -#define MINCIE (1 << 3) /* Min Count Interrupt Enable */ -#define MAXCIE (1 << 4) /* Max Count Interrupt Enable */ -#define COV31IE (1 << 5) /* Bit 31 Overflow Interrupt Enable */ -#define COV15IE (1 << 6) /* Bit 15 Overflow Interrupt Enable */ -#define CZEROIE (1 << 7) /* Count to Zero Interrupt Enable */ -#define CZMIE (1 << 8) /* CZM Pin Interrupt Enable */ -#define CZMEIE (1 << 9) /* CZM Error Interrupt Enable */ -#define CZMZIE (1 << 10) /* CZM Zeroes Counter Interrupt Enable */ - -/* CNT_STATUS bitmasks */ -#define ICII (1 << 0) /* Illegal Gray/Binary Code Interrupt Identifier */ -#define UCII (1 << 1) /* Up count Interrupt Identifier */ -#define DCII (1 << 2) /* Down count Interrupt Identifier */ -#define MINCII (1 << 3) /* Min Count Interrupt Identifier */ -#define MAXCII (1 << 4) /* Max Count Interrupt Identifier */ -#define COV31II (1 << 5) /* Bit 31 Overflow Interrupt Identifier */ -#define COV15II (1 << 6) /* Bit 15 Overflow Interrupt Identifier */ -#define CZEROII (1 << 7) /* Count to Zero Interrupt Identifier */ -#define CZMII (1 << 8) /* CZM Pin Interrupt Identifier */ -#define CZMEII (1 << 9) /* CZM Error Interrupt Identifier */ -#define CZMZII (1 << 10) /* CZM Zeroes Counter Interrupt Identifier */ - -/* CNT_COMMAND bitmasks */ -#define W1LCNT 0xf /* Load Counter Register */ -#define W1LMIN 0xf0 /* Load Min Register */ -#define W1LMAX 0xf00 /* Load Max Register */ -#define W1ZMONCE (1 << 12) /* Enable CZM Clear Counter Once */ - -#define W1LCNT_ZERO (1 << 0) /* write 1 to load CNT_COUNTER with zero */ -#define W1LCNT_MIN (1 << 2) /* write 1 to load CNT_COUNTER from CNT_MIN */ -#define W1LCNT_MAX (1 << 3) /* write 1 to load CNT_COUNTER from CNT_MAX */ - -#define W1LMIN_ZERO (1 << 4) /* write 1 to load CNT_MIN with zero */ -#define W1LMIN_CNT (1 << 5) /* write 1 to load CNT_MIN from CNT_COUNTER */ -#define W1LMIN_MAX (1 << 7) /* write 1 to load CNT_MIN from CNT_MAX */ - -#define W1LMAX_ZERO (1 << 8) /* write 1 to load CNT_MAX with zero */ -#define W1LMAX_CNT (1 << 9) /* write 1 to load CNT_MAX from CNT_COUNTER */ -#define W1LMAX_MIN (1 << 10) /* write 1 to load CNT_MAX from CNT_MIN */ - -/* CNT_DEBOUNCE bitmasks */ -#define DPRESCALE 0xf /* Load Counter Register */ - -#endif -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-metag" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
