The TZ1090 peripheral (PERIP) register region controls a bank of system
clock gates for individual peripherals.
Create a clock binding for the provider of these clocks, and a header
file in <dt-bindings/clock/> for enumerating the provided clocks.
There is a single input clock, the main system clock, and multiple
peripheral specific system clocks provided which should be referenced by
the relevant peripheral device nodes.
Signed-off-by: James Hogan <james.hogan@xxxxxxxxxx>
Cc: Mike Turquette <mturquette@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
Cc: linux-metag@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
---
Changes since v1 (patch 15):
- New patch.
- Convert explicit DT representation of clock infrastructure using
generic bindings to several TZ1090 specific bindings representing
groups of TZ1090 clocks.
---
.../bindings/clock/img,tz1090-perip-cru.txt | 49 ++++++++++++++++++++++
include/dt-bindings/clock/tz1090-perip.h | 30 +++++++++++++
2 files changed, 79 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/img,tz1090-perip-cru.txt
create mode 100644 include/dt-bindings/clock/tz1090-perip.h
diff --git a/Documentation/devicetree/bindings/clock/img,tz1090-perip-cru.txt b/Documentation/devicetree/bindings/clock/img,tz1090-perip-cru.txt
new file mode 100644
index 0000000..3517737
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/img,tz1090-perip-cru.txt
@@ -0,0 +1,49 @@
+Binding for TZ1090 Peripheral register clocks.
+
+This binding uses the common clock binding[1]. It represents the clocks
+controlled from the peripheral registers of the TZ1090:
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : Shall be "img,tz1090-perip-cru".
+- #clock-cells : From common clock binding; shall be set to 1.
+- reg : Base address for clock registers in peripheral register
+ region.
+- clocks : Clock specifiers for each input clock.
+- clock-names : Labels for each input clock specified in clocks.
+ Can contain the following entries:
+ "sys" : Main system clock.
+
+Optional properties:
+- clock-indices : From common clock binding. Allows clock-output-names to
+ be sparse.
+- clock-output-names : From common clock binding. May be used to name specific
+ output clocks so that other clock providers can find
+ the clocks by name before the provider has been
+ instantiated. Can contain:
+ "sys_scb0", "sys_scb1", "sys_scb2", "sys_sdio",
+ "sys_uart0", "sys_uart1", "sys_spim", "sys_spis",
+ "sys_spim1", "sys_i2sout", "sys_i2sin", "sys_lcd",
+ "sys_sdhost", "sys_usb"
+
+Clock Specifier Definition:
+- <1st-cell>: Output clock number. Use constants from
+ <dt-bindings/clock/tz1090-perip.h>.
+
+Examples:
+ perip_cru: perip_cru {
+ compatible = "img,tz1090-perip-cru";
+ #clock-cells = <1>;
+ reg = <0x02004000 0x18>;
+ clocks = <&top_clks CLK_TOP_SYS>;
+ clock-names = "sys";
+ };
+
+ i2c {
+ ...
+ clocks = <&top_clks CLK_TOP_SCB>,
+ <&perip_cru CLK_PERIP_SCB0>;
+ clock-names = "scb", "sys";
+ ...
+ };
diff --git a/include/dt-bindings/clock/tz1090-perip.h b/include/dt-bindings/clock/tz1090-perip.h
new file mode 100644
index 0000000..b2990ea
--- /dev/null
+++ b/include/dt-bindings/clock/tz1090-perip.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2013-2014 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DT_BINDINGS_CLK_TZ1090_PERIP_H
+#define _DT_BINDINGS_CLK_TZ1090_PERIP_H
+
+/* CR_PERIP_CLKEN - Peripheral system clocks */
+#define CLK_PERIP_SCB0 0
+#define CLK_PERIP_SCB1 1
+#define CLK_PERIP_SCB2 2
+#define CLK_PERIP_SDIO 3
+#define CLK_PERIP_UART0 4
+#define CLK_PERIP_UART1 5
+#define CLK_PERIP_SPIM 6
+#define CLK_PERIP_SPIS 7
+#define CLK_PERIP_SPIM1 8
+#define CLK_PERIP_I2SOUT 9
+#define CLK_PERIP_I2SIN 10
+#define CLK_PERIP_LCD 11
+#define CLK_PERIP_SDHOST 12
+#define CLK_PERIP_USB 13
+
+#define CLK_PERIP_MAX 14
+
+#endif
--
2.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-metag" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
