Replace commas with semicolons between irqchip callback initialisation statements in tz1090_gpio_bank_probe. The commas appear to be a subtle remnant of when the irqchips were statically initialised. Thanks to Thomas Gleixner for spotting it while whipping up a coccinelle script. Reported-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx> Signed-off-by: James Hogan <james.hogan@xxxxxxxxxx> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> Cc: Alexandre Courbot <gnurou@xxxxxxxxx> Cc: linux-gpio@xxxxxxxxxxxxxxx Cc: linux-metag@xxxxxxxxxxxxxxx --- drivers/gpio/gpio-tz1090.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/gpio/gpio-tz1090.c b/drivers/gpio/gpio-tz1090.c index 23e061392411..5246a60eff6d 100644 --- a/drivers/gpio/gpio-tz1090.c +++ b/drivers/gpio/gpio-tz1090.c @@ -488,26 +488,26 @@ static int tz1090_gpio_bank_probe(struct tz1090_gpio_bank_info *info) gc->chip_types[0].handler = handle_level_irq; gc->chip_types[0].regs.ack = REG_GPIO_IRQ_STS; gc->chip_types[0].regs.mask = REG_GPIO_IRQ_EN; - gc->chip_types[0].chip.irq_startup = gpio_startup_irq, - gc->chip_types[0].chip.irq_ack = irq_gc_ack_clr_bit, - gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit, - gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit, - gc->chip_types[0].chip.irq_set_type = gpio_set_irq_type, - gc->chip_types[0].chip.irq_set_wake = gpio_set_irq_wake, - gc->chip_types[0].chip.flags = IRQCHIP_MASK_ON_SUSPEND, + gc->chip_types[0].chip.irq_startup = gpio_startup_irq; + gc->chip_types[0].chip.irq_ack = irq_gc_ack_clr_bit; + gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit; + gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit; + gc->chip_types[0].chip.irq_set_type = gpio_set_irq_type; + gc->chip_types[0].chip.irq_set_wake = gpio_set_irq_wake; + gc->chip_types[0].chip.flags = IRQCHIP_MASK_ON_SUSPEND; /* edge chip type */ gc->chip_types[1].type = IRQ_TYPE_EDGE_BOTH; gc->chip_types[1].handler = handle_edge_irq; gc->chip_types[1].regs.ack = REG_GPIO_IRQ_STS; gc->chip_types[1].regs.mask = REG_GPIO_IRQ_EN; - gc->chip_types[1].chip.irq_startup = gpio_startup_irq, - gc->chip_types[1].chip.irq_ack = irq_gc_ack_clr_bit, - gc->chip_types[1].chip.irq_mask = irq_gc_mask_clr_bit, - gc->chip_types[1].chip.irq_unmask = irq_gc_mask_set_bit, - gc->chip_types[1].chip.irq_set_type = gpio_set_irq_type, - gc->chip_types[1].chip.irq_set_wake = gpio_set_irq_wake, - gc->chip_types[1].chip.flags = IRQCHIP_MASK_ON_SUSPEND, + gc->chip_types[1].chip.irq_startup = gpio_startup_irq; + gc->chip_types[1].chip.irq_ack = irq_gc_ack_clr_bit; + gc->chip_types[1].chip.irq_mask = irq_gc_mask_clr_bit; + gc->chip_types[1].chip.irq_unmask = irq_gc_mask_set_bit; + gc->chip_types[1].chip.irq_set_type = gpio_set_irq_type; + gc->chip_types[1].chip.irq_set_wake = gpio_set_irq_wake; + gc->chip_types[1].chip.flags = IRQCHIP_MASK_ON_SUSPEND; /* Setup chained handler for this GPIO bank */ irq_set_handler_data(bank->irq, bank); -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-metag" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
