From: Sakari Ailus <sakari.ailus@xxxxxx> Document the CSI1/CCP2 properties strobe_clk_inv and strobe_clock properties. The former tells whether the strobe/clock signal is inverted, while the latter signifies the clock or strobe mode. Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxx> --- Documentation/devicetree/bindings/media/video-interfaces.txt | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index f5b61bd..f0523f7 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -114,9 +114,10 @@ Optional endpoint properties lane and followed by the data lanes in the same order as in data-lanes. Valid values are 0 (normal) and 1 (inverted). The length of the array should be the combined length of data-lanes and clock-lanes properties. - If the lane-polarities property is omitted, the value must be interpreted - as 0 (normal). This property is valid for serial busses only. - +- clock-inv: Clock or strobe signal inversion. + Possible values: 0 -- not inverted; 1 -- inverted +- strobe: Whether the clock signal is used as clock or strobe. Used + with CCP2, for instance. Example ------- -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
