Re: [PATCH 1/6] adv7180: fix broken standards handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Acked-by: Federico Vaga <federico.vaga@xxxxxxxxx>

On Friday, April 22, 2016 03:03:37 PM Hans Verkuil wrote:
> From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
> 
> The adv7180 attempts to autodetect the standard. Unfortunately this
> is seriously broken.
> 
> This patch removes the autodetect completely. Only the querystd op
> will detect the standard. Since the design of the adv7180 requires
> that you switch to a special autodetect mode you cannot call querystd
> when you are streaming.
> 
> So the s_stream op has been added so we know whether we are streaming
> or not, and if we are, then querystd returns EBUSY.
> 
> After testing this with a signal generator is became obvious that
> a sleep is needed between changing the standard to autodetect and
> reading the status. So the autodetect can never have worked well.
> 
> The s_std call now just sets the new standard without any querying.
> 
> If the driver supports the interrupt, then when it detects a standard
> change it will signal that by sending the V4L2_EVENT_SOURCE_CHANGE
> event.
> 
> With these changes this driver now behaves like all other video
> receivers.
> 
> Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
> Cc: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
> Cc: Federico Vaga <federico.vaga@xxxxxxxxx>
> ---
>  drivers/media/i2c/adv7180.c | 118
> ++++++++++++++++++++++++++++++-------------- 1 file changed, 80
> insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
> index 51a92b3..5a75a91 100644
> --- a/drivers/media/i2c/adv7180.c
> +++ b/drivers/media/i2c/adv7180.c
> @@ -26,8 +26,9 @@
>  #include <linux/i2c.h>
>  #include <linux/slab.h>
>  #include <linux/of.h>
> -#include <media/v4l2-ioctl.h>
>  #include <linux/videodev2.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/v4l2-event.h>
>  #include <media/v4l2-device.h>
>  #include <media/v4l2-ctrls.h>
>  #include <linux/mutex.h>
> @@ -192,8 +193,8 @@ struct adv7180_state {
>  	struct mutex		mutex; /* mutual excl. when accessing chip */
>  	int			irq;
>  	v4l2_std_id		curr_norm;
> -	bool			autodetect;
>  	bool			powered;
> +	bool			streaming;
>  	u8			input;
> 
>  	struct i2c_client	*client;
> @@ -338,12 +339,26 @@ static int adv7180_querystd(struct v4l2_subdev *sd,
> v4l2_std_id *std) if (err)
>  		return err;
> 
> -	/* when we are interrupt driven we know the state */
> -	if (!state->autodetect || state->irq > 0)
> -		*std = state->curr_norm;
> -	else
> -		err = __adv7180_status(state, NULL, std);
> +	if (state->streaming) {
> +		err = -EBUSY;
> +		goto unlock;
> +	}
> +
> +	err = adv7180_set_video_standard(state,
> +			ADV7180_STD_AD_PAL_BG_NTSC_J_SECAM);
> +	if (err)
> +		goto unlock;
> 
> +	msleep(100);
> +	__adv7180_status(state, NULL, std);
> +
> +	err = v4l2_std_to_adv7180(state->curr_norm);
> +	if (err < 0)
> +		goto unlock;
> +
> +	err = adv7180_set_video_standard(state, err);
> +
> +unlock:
>  	mutex_unlock(&state->mutex);
>  	return err;
>  }
> @@ -387,23 +402,13 @@ static int adv7180_program_std(struct adv7180_state
> *state) {
>  	int ret;
> 
> -	if (state->autodetect) {
> -		ret = adv7180_set_video_standard(state,
> -			ADV7180_STD_AD_PAL_BG_NTSC_J_SECAM);
> -		if (ret < 0)
> -			return ret;
> -
> -		__adv7180_status(state, NULL, &state->curr_norm);
> -	} else {
> -		ret = v4l2_std_to_adv7180(state->curr_norm);
> -		if (ret < 0)
> -			return ret;
> -
> -		ret = adv7180_set_video_standard(state, ret);
> -		if (ret < 0)
> -			return ret;
> -	}
> +	ret = v4l2_std_to_adv7180(state->curr_norm);
> +	if (ret < 0)
> +		return ret;
> 
> +	ret = adv7180_set_video_standard(state, ret);
> +	if (ret < 0)
> +		return ret;
>  	return 0;
>  }
> 
> @@ -415,18 +420,12 @@ static int adv7180_s_std(struct v4l2_subdev *sd,
> v4l2_std_id std) if (ret)
>  		return ret;
> 
> -	/* all standards -> autodetect */
> -	if (std == V4L2_STD_ALL) {
> -		state->autodetect = true;
> -	} else {
> -		/* Make sure we can support this std */
> -		ret = v4l2_std_to_adv7180(std);
> -		if (ret < 0)
> -			goto out;
> +	/* Make sure we can support this std */
> +	ret = v4l2_std_to_adv7180(std);
> +	if (ret < 0)
> +		goto out;
> 
> -		state->curr_norm = std;
> -		state->autodetect = false;
> -	}
> +	state->curr_norm = std;
> 
>  	ret = adv7180_program_std(state);
>  out:
> @@ -747,6 +746,40 @@ static int adv7180_g_tvnorms(struct v4l2_subdev *sd,
> v4l2_std_id *norm) return 0;
>  }
> 
> +static int adv7180_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> +	struct adv7180_state *state = to_state(sd);
> +	int ret;
> +
> +	/* It's always safe to stop streaming, no need to take the lock */
> +	if (!enable) {
> +		state->streaming = enable;
> +		return 0;
> +	}
> +
> +	/* Must wait until querystd released the lock */
> +	ret = mutex_lock_interruptible(&state->mutex);
> +	if (ret)
> +		return ret;
> +	state->streaming = enable;
> +	mutex_unlock(&state->mutex);
> +	return 0;
> +}
> +
> +static int adv7180_subscribe_event(struct v4l2_subdev *sd,
> +				   struct v4l2_fh *fh,
> +				   struct v4l2_event_subscription *sub)
> +{
> +	switch (sub->type) {
> +	case V4L2_EVENT_SOURCE_CHANGE:
> +		return v4l2_src_change_event_subdev_subscribe(sd, fh, sub);
> +	case V4L2_EVENT_CTRL:
> +		return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub);
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
>  static const struct v4l2_subdev_video_ops adv7180_video_ops = {
>  	.s_std = adv7180_s_std,
>  	.g_std = adv7180_g_std,
> @@ -756,10 +789,13 @@ static const struct v4l2_subdev_video_ops
> adv7180_video_ops = { .g_mbus_config = adv7180_g_mbus_config,
>  	.cropcap = adv7180_cropcap,
>  	.g_tvnorms = adv7180_g_tvnorms,
> +	.s_stream = adv7180_s_stream,
>  };
> 
>  static const struct v4l2_subdev_core_ops adv7180_core_ops = {
>  	.s_power = adv7180_s_power,
> +	.subscribe_event = adv7180_subscribe_event,
> +	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
>  };
> 
>  static const struct v4l2_subdev_pad_ops adv7180_pad_ops = {
> @@ -784,8 +820,14 @@ static irqreturn_t adv7180_irq(int irq, void *devid)
>  	/* clear */
>  	adv7180_write(state, ADV7180_REG_ICR3, isr3);
> 
> -	if (isr3 & ADV7180_IRQ3_AD_CHANGE && state->autodetect)
> -		__adv7180_status(state, NULL, &state->curr_norm);
> +	if (isr3 & ADV7180_IRQ3_AD_CHANGE) {
> +		static const struct v4l2_event src_ch = {
> +			.type = V4L2_EVENT_SOURCE_CHANGE,
> +			.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
> +		};
> +
> +		v4l2_subdev_notify_event(&state->sd, &src_ch);
> +	}
>  	mutex_unlock(&state->mutex);
> 
>  	return IRQ_HANDLED;
> @@ -1230,7 +1272,7 @@ static int adv7180_probe(struct i2c_client *client,
> 
>  	state->irq = client->irq;
>  	mutex_init(&state->mutex);
> -	state->autodetect = true;
> +	state->curr_norm = V4L2_STD_NTSC;
>  	if (state->chip_info->flags & ADV7180_FLAG_RESET_POWERED)
>  		state->powered = true;
>  	else
> @@ -1238,7 +1280,7 @@ static int adv7180_probe(struct i2c_client *client,
>  	state->input = 0;
>  	sd = &state->sd;
>  	v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
> -	sd->flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	sd->flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
> 
>  	ret = adv7180_init_controls(state);
>  	if (ret)

-- 
Federico Vaga
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux