On Wed, Apr 20, 2016 at 1:02 AM, Antti Palosaari <crope@xxxxxx> wrote:
> Hello
> I am not happy with that new module parameter as I cannot see real need for
> it. So get rid of it.
My reasoning for this is:
1) We know of just two devices which may have the issue, but there are
probably more. The module parameter allows a user to apply the
workaround to other devices we did not consider or test. Should we
perhaps apply for all mxl5007t devices?
2) Not all devices that match VID and PID have the issue, so it allows
the user to disable the workaround.
>
> Better to compare both VID and PID when enabling that work-around. Driver
> supports currently quite many different USB IDs and there is still small
> risk duplicate PID will exists at some point enabling work-around for wrong
> device.
>
OK. Will wait for comments on above before a v2.
Thanks,
Alessandro
> regards
> Antti
>
>
>
>
> On 04/15/2016 06:37 PM, Alessandro Radicati wrote:
>>
>> The MXL5007T tuner will lock-up on some devices after an I2C read
>> transaction. This patch adds a kernel module parameter "no_read" to work
>> around this issue by inhibiting such operations and emulating a 0x00
>> response. The workaround is applied automatically to USB product IDs
>> known
>> to exhibit this flaw, unless the kernel module parameter is specified.
>>
>> Signed-off-by: Alessandro Radicati <alessandro@xxxxxxxxxxxx>
>> ---
>> drivers/media/usb/dvb-usb-v2/af9035.c | 27 +++++++++++++++++++++++++++
>> drivers/media/usb/dvb-usb-v2/af9035.h | 1 +
>> 2 files changed, 28 insertions(+)
>>
>> diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c
>> b/drivers/media/usb/dvb-usb-v2/af9035.c
>> index 2638e32..8225403 100644
>> --- a/drivers/media/usb/dvb-usb-v2/af9035.c
>> +++ b/drivers/media/usb/dvb-usb-v2/af9035.c
>> @@ -24,6 +24,10 @@
>> /* Max transfer size done by I2C transfer functions */
>> #define MAX_XFER_SIZE 64
>>
>> +static int dvb_usb_af9035_no_read = -1;
>> +module_param_named(no_read, dvb_usb_af9035_no_read, int, 0644);
>> +MODULE_PARM_DESC(no_read, "Emulate I2C reads for devices that do not
>> support them.");
>> +
>> DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
>>
>> static u16 af9035_checksum(const u8 *buf, size_t len)
>> @@ -348,6 +352,9 @@ static int af9035_i2c_master_xfer(struct i2c_adapter
>> *adap,
>>
>> ret = af9035_rd_regs(d, reg, &msg[1].buf[0],
>> msg[1].len);
>> + } else if (state->no_read) {
>> + memset(msg[1].buf, 0, msg[1].len);
>> + ret = 0;
>> } else {
>> /* I2C write + read */
>> u8 buf[MAX_XFER_SIZE];
>> @@ -421,6 +428,9 @@ static int af9035_i2c_master_xfer(struct i2c_adapter
>> *adap,
>> if (msg[0].len > 40) {
>> /* TODO: correct limits > 40 */
>> ret = -EOPNOTSUPP;
>> + } else if (state->no_read) {
>> + memset(msg[0].buf, 0, msg[0].len);
>> + ret = 0;
>> } else {
>> /* I2C read */
>> u8 buf[5];
>> @@ -962,6 +972,23 @@ skip_eeprom:
>> state->af9033_config[i].clock =
>> clock_lut_af9035[tmp];
>> }
>>
>> + /* Some MXL5007T devices cannot properly handle tuner I2C read
>> ops. */
>> + if (dvb_usb_af9035_no_read != -1) { /* Override with module param
>> */
>> + state->no_read = dvb_usb_af9035_no_read == 0 ? false :
>> true;
>> + } else {
>> + switch (le16_to_cpu(d->udev->descriptor.idProduct)) {
>> + case USB_PID_AVERMEDIA_A867:
>> + case USB_PID_AVERMEDIA_TWINSTAR:
>> + dev_info(&d->udev->dev,
>> + "%s: Device may have issues with I2C read
>> operations. Enabling fix.\n",
>> + KBUILD_MODNAME);
>> + state->no_read = true;
>> + break;
>> + default:
>> + state->no_read = false;
>> + }
>> + }
>> +
>> return 0;
>>
>> err:
>> diff --git a/drivers/media/usb/dvb-usb-v2/af9035.h
>> b/drivers/media/usb/dvb-usb-v2/af9035.h
>> index df22001..a76dafa 100644
>> --- a/drivers/media/usb/dvb-usb-v2/af9035.h
>> +++ b/drivers/media/usb/dvb-usb-v2/af9035.h
>> @@ -62,6 +62,7 @@ struct state {
>> u8 chip_version;
>> u16 chip_type;
>> u8 dual_mode:1;
>> + u8 no_read:1;
>> u16 eeprom_addr;
>> u8 af9033_i2c_addr[2];
>> struct af9033_config af9033_config[2];
>>
>
> --
> http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
