On 03/15/2016 08:10 AM, Ran Shalit wrote: > Hello, > > This is a bit offtopic, so I will understand if you rather not discuss that... > > I am trying to use gstreamer with v4l2 vivi device, > I first check the capabilities with > > gst-launch-1.0 --gst-debug=v4l2src:5 v4l2src device="/dev/video0" ! > fakesink 2>&1 > > and it gives many capabilities such as the following: > > video/x-raw-yuv, format=(string)YUY2, framerate=(fraction)[1/1000, > 1000/1], width=(int) 640, height=(int)180, interlaced=(boolean)true > > So I tried to run as following: > > gst-launch-0.10 v4l2src device="/dev/video0" ! > video/x-raw,width=640,height=180,framerate=30 ! autovideosink > > But it keeps giving me auto negotiation error -4. > Trying to give other values did not help neither. > > It is probaby more a gstreamer issue, but if someone is familiar and > can shed some light on this will will help. Actually, I suspect that vivi is the culprit. It had some non-standard behavior that might mess up gstreamer. One of the (many) reasons it was replaced with vivid. Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
