I am trying to above device with kernel 4.1.13-100.fc21.x86_64. kernel: usb 2-2: New USB device found, idVendor=2040, idProduct=b140 kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 kernel: usb 2-2: Product: Hauppauge Device kernel: usb 2-2: Manufacturer: Hauppauge kernel: usb 2-2: SerialNumber: 4035391470 kernel: [5789620.592751] cx231xx 2-2:1.1: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:b140) with 7 interfaces kernel: [5789620.592959] cx231xx 2-2:1.1: Identified as Hauppauge EXETER (card=8) kernel: cx231xx 2-2:1.1: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:b140) with 7 interfaces kernel: cx231xx 2-2:1.1: Identified as Hauppauge EXETER (card=8) kernel: [5789620.593974] i2c i2c-8: Added multiplexed i2c bus 10 kernel: [5789620.594031] i2c i2c-8: Added multiplexed i2c bus 11 kernel: i2c i2c-8: Added multiplexed i2c bus 10 kernel: i2c i2c-8: Added multiplexed i2c bus 11 kernel: [5789620.755944] cx25840 7-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0) kernel: cx25840 7-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0) kernel: [5789622.682697] cx25840 7-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes) kernel: cx25840 7-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes) kernel: [5789622.719317] Chip ID is not zero. It is not a TEA5767 kernel: [5789622.719327] tuner 10-0060: Tuner -1 found with type(s) Radio TV. kernel: [5789622.719349] tda18271 10-0060: creating new instance kernel: Chip ID is not zero. It is not a TEA5767 kernel: tuner 10-0060: Tuner -1 found with type(s) Radio TV. kernel: tda18271 10-0060: creating new instance kernel: [5789622.721440] Unknown device (110) detected @ 10-0060, device not supported. kernel: [5789622.721445] tda18271_attach: [10-0060|M] error -22 on line 1285 kernel: [5789622.721447] tda18271 10-0060: destroying instance kernel: Unknown device (110) detected @ 10-0060, device not supported. kernel: tda18271_attach: [10-0060|M] error -22 on line 1285 kernel: tda18271 10-0060: destroying instance kernel: [5789622.726935] tuner 10-0060: Tuner has no way to set tv freq kernel: tuner 10-0060: Tuner has no way to set tv freq kernel: [5789622.728068] cx231xx 2-2:1.1: v4l2 driver version 0.0.3 kernel: cx231xx 2-2:1.1: v4l2 driver version 0.0.3 kernel: [5789622.856428] tuner 10-0060: Tuner has no way to set tv freq kernel: [5789622.856582] cx231xx 2-2:1.1: Registered video device video1 [v4l2] kernel: [5789622.856695] cx231xx 2-2:1.1: Registered VBI device vbi1 kernel: [5789622.856964] cx231xx 2-2:1.1: audio EndPoint Addr 0x83, Alternate settings: 3 kernel: tuner 10-0060: Tuner has no way to set tv freq kernel: cx231xx 2-2:1.1: Registered video device video1 [v4l2] kernel: cx231xx 2-2:1.1: Registered VBI device vbi1 kernel: cx231xx 2-2:1.1: audio EndPoint Addr 0x83, Alternate settings: 3 kernel: [5789622.893807] cx231xx 2-2:1.1: dvb_init: looking for tuner / demod on i2c bus: 10 kernel: cx231xx 2-2:1.1: dvb_init: looking for tuner / demod on i2c bus: 10 kernel: cx231xx 2-2:1.1: cx231xx_send_usb_command: failed with status --32 kernel: lgdt3305_read_reg: error (addr 0e reg 0001 error (ret == -32) kernel: lgdt3305_attach: error -32 on line 1143 kernel: lgdt3305_attach: unable to detect LGDT3305 hardware kernel: cx231xx 2-2:1.1: Failed to attach LG3305 front end kernel: [5789622.894206] cx231xx 2-2:1.1: cx231xx_send_usb_command: failed with status --32 kernel: [5789622.894210] lgdt3305_read_reg: error (addr 0e reg 0001 error (ret == -32) kernel: [5789622.894212] lgdt3305_attach: error -32 on line 1143 kernel: [5789622.894214] lgdt3305_attach: unable to detect LGDT3305 hardware kernel: [5789622.894218] cx231xx 2-2:1.1: Failed to attach LG3305 front end kernel: [5789622.894919] cx231xx 2-2:1.1: video EndPoint Addr 0x84, Alternate settings: 5 kernel: [5789622.894925] cx231xx 2-2:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2 kernel: [5789622.894928] cx231xx 2-2:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2 kernel: [5789622.894931] cx231xx 2-2:1.1: TS EndPoint Addr 0x81, Alternate settings: 6 kernel: cx231xx 2-2:1.1: video EndPoint Addr 0x84, Alternate settings: 5 kernel: cx231xx 2-2:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2 kernel: cx231xx 2-2:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2 Appreciate some advice. Regards, Scott -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
