Wolfram Sang wrote: > On Fri, Jan 08, 2016 at 04:04:48PM +0100, Peter Rosin wrote: > > > > Hi! > > > > [doing a v3 even if there is no "big picture" feedback yet, but > > previous versions has bugs that make them harder to test than > > needed, and testing is very much desired] > > > > I have a pair of boards with this i2c topology: > > > > GPIO ---| ------ BAT1 > > | v / > > I2C -----+------B---+---- MUX > > | \ > > EEPROM ------ BAT2 > > > > (B denotes the boundary between the boards) > > > > The problem with this is that the GPIO controller sits on the same i2c bus > > that it MUXes. For pca954x devices this is worked around by using unlocked > > transfers when updating the MUX. I have no such luck as the GPIO is a general > > purpose IO expander and the MUX is just a random bidirectional MUX, unaware > > of the fact that it is muxing an i2c bus, and extending unlocked transfers > > into the GPIO subsystem is too ugly to even think about. But the general hw > > approach is sane in my opinion, with the number of connections between the > > two boards minimized. To put is plainly, I need support for it. > > > > So, I observe that while it is needed to have the i2c bus locked during the > > actual MUX update in order to avoid random garbage on the slave side, it > > is not strictly a must to have it locked over the whole sequence of a full > > select-transfer-deselect operation. The MUX itself needs to be locked, so > > transfers to clients behind the mux are serialized, and the MUX needs to be > > stable during all i2c traffic (otherwise individual mux slave segments > > might see garbage). > > > > This series accomplishes this by adding code to i2c-mux-gpio and > > i2c-mux-pinctrl that determines if all involved devices used to update the > > mux are controlled by the same root i2c adapter that is muxed. When this > > is the case, the select-transfer-deselect operations should be locked > > individually to avoid the deadlock. The i2c bus *is* still locked > > during muxing, since the muxing happens as part of i2c transfers. This > > is true even if the MUX is updated with several transfers to the GPIO (at > > least as long as *all* MUX changes are using the i2s master bus). A lock > > is added to the mux so that transfers through the mux are serialized. > > > > Concerns: > > - The locking is perhaps too complex? > > - I worry about the priority inheritance aspect of the adapter lock. When > > the transfers behind the mux are divided into select-transfer-deselect all > > locked individually, low priority transfers get more chances to interfere > > with high priority transfers. > > - When doing an i2c_transfer() in_atomic() context or with irqs_disabled(), > > there is a higher possibility that the mux is not returned to its idle > > state after a failed (-EAGAIN) transfer due to trylock. > > - Is the detection of i2c-controlled gpios and pinctrls sane (i.e. the > > usage of the new i2c_root_adapter() function in 8/8)? > > > > To summarize the series, there's some i2c-mux infrastructure cleanup work > > first (I think that part stands by itself as desireable regardless), the > > locking changes are in the last three patches of the series, with the real > > meat in 8/8. > > > > PS. needs a bunch of testing, I do not have access to all the involved hw > > I want to let you know that I am currently thinking about this series. Glad to hear it! > There seems to be a second occasion where it could have helped AFAICT. > http://patchwork.ozlabs.org/patch/584776/ (check my comments there from > yesterday and today) The mpu6050 driver has to set muxc->i2c_controlled before adding any child adapters for anything to behave differently, and it also has to make sure that all accesses in select/deselect are normal i2c accesses (i.e. not unlocked accesses). When doing so, unreleated i2c traffic might interleave with the muxing. So, if the chip is auto-deselecting on the first i2c transfer after select it will never work properly. > First of all, really thank you that you tried to find the proper > solution and went all the way for it. It is easy to do a fire&forget > hack here, but you didn't. Fire&forget often turns out to be just the fire. If you do it properly there is a better chance that you really can forget it... > I hope you understand, though, that I need to make a balance between > features and complexity in my subsystem to have maintainable and stable > code. > > As I wrote in the mentioned thread already: "However, I am still > undecided if that series should go upstream because it makes the mux > code another magnitude more complex. And while this seems to be the > second issue which could be fixed by that series, both issues seem to > be corner cases, so I am not sure it is worth the complexity." > > And for the cleanup series using struct mux_core. It is quite an > intrusive change and, frankly, the savings look surprisingly low. I > would have expected more, but you never find out until you do it. So, I > am unsure here as well. Yes, that part of the series went ballistic when the half-dozen mux users outside of drivers/i2c was added to the mix (I was originally not aware of them). The savings looked better when only the i2c-internal muxes was considered, mainly because the external muxes are often not real muxes and only have one child adapter. Creating the mux-core for that one adapter then swallows the savings. Funnily enough, I was just the other day looking at the series again and decided to redo those 5 patches so that I first add the new mux core and implement the old interface in terms of the new interface, then convert all the mux users one patch at a time, then remove the glue. That means 15 patches instead of 5, but each patch only touches one subsystem, which should ease the transition. The end result is equivalent, I only had to change a few names to make it possible to have both the old and the new interfaces active at the same time. In doing so, I realized that what might be good for the non-generic one-child-only "muxes" is perhaps an interface that creates a mux core and registers one child adapter with one call? One other thing that could help the +- statistics is to maybe add more parameters to i2c_mux_alloc, such as parent adapter and select/deselect ops. But that is fairly cosmetic... > I am not decided and open for discussion. This is just where we are > currently. All interested parties, I am looking forward to more > thoughts. Cheers, Peter -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
