Re: [PATCH] v4l2: remove MIPI CSI-2 driver for SH-Mobile platforms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/24/2016 03:07 AM, Simon Horman wrote:
> This driver does not appear to have ever been used by any SoC's defconfig
> and does not appear to support DT. In sort it seems unused an unlikely
> to be used.

I prefer to move it to staging/media first for 1-2 kernel cycles. Just in case
someone does need this.

There are more soc-camera drivers for which we are going to do that, so let's
do it for this one as well.

Regards,

	Hans

> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> ---
>  drivers/media/platform/soc_camera/Kconfig          |   7 -
>  drivers/media/platform/soc_camera/Makefile         |   1 -
>  drivers/media/platform/soc_camera/sh_mobile_csi2.c | 400 ---------------------
>  3 files changed, 408 deletions(-)
>  delete mode 100644 drivers/media/platform/soc_camera/sh_mobile_csi2.c
> 
>  Based on the master branch of media_tree
> 
> diff --git a/drivers/media/platform/soc_camera/Kconfig b/drivers/media/platform/soc_camera/Kconfig
> index f2776cd415ca..4aed9ab03aa8 100644
> --- a/drivers/media/platform/soc_camera/Kconfig
> +++ b/drivers/media/platform/soc_camera/Kconfig
> @@ -43,13 +43,6 @@ config VIDEO_RCAR_VIN
>  	---help---
>  	  This is a v4l2 driver for the R-Car VIN Interface
>  
> -config VIDEO_SH_MOBILE_CSI2
> -	tristate "SuperH Mobile MIPI CSI-2 Interface driver"
> -	depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK
> -	depends on ARCH_SHMOBILE || SUPERH || COMPILE_TEST
> -	---help---
> -	  This is a v4l2 driver for the SuperH MIPI CSI-2 Interface
> -
>  config VIDEO_SH_MOBILE_CEU
>  	tristate "SuperH Mobile CEU Interface driver"
>  	depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
> diff --git a/drivers/media/platform/soc_camera/Makefile b/drivers/media/platform/soc_camera/Makefile
> index 2826382dc9f8..e811182fb962 100644
> --- a/drivers/media/platform/soc_camera/Makefile
> +++ b/drivers/media/platform/soc_camera/Makefile
> @@ -12,5 +12,4 @@ obj-$(CONFIG_VIDEO_MX3)			+= mx3_camera.o
>  obj-$(CONFIG_VIDEO_OMAP1)		+= omap1_camera.o
>  obj-$(CONFIG_VIDEO_PXA27x)		+= pxa_camera.o
>  obj-$(CONFIG_VIDEO_SH_MOBILE_CEU)	+= sh_mobile_ceu_camera.o
> -obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2)	+= sh_mobile_csi2.o
>  obj-$(CONFIG_VIDEO_RCAR_VIN)		+= rcar_vin.o
> diff --git a/drivers/media/platform/soc_camera/sh_mobile_csi2.c b/drivers/media/platform/soc_camera/sh_mobile_csi2.c
> deleted file mode 100644
> index 09b18365a4b1..000000000000
> --- a/drivers/media/platform/soc_camera/sh_mobile_csi2.c
> +++ /dev/null
> @@ -1,400 +0,0 @@
> -/*
> - * Driver for the SH-Mobile MIPI CSI-2 unit
> - *
> - * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - */
> -
> -#include <linux/delay.h>
> -#include <linux/err.h>
> -#include <linux/i2c.h>
> -#include <linux/io.h>
> -#include <linux/platform_device.h>
> -#include <linux/pm_runtime.h>
> -#include <linux/slab.h>
> -#include <linux/videodev2.h>
> -#include <linux/module.h>
> -
> -#include <media/drv-intf/sh_mobile_ceu.h>
> -#include <media/drv-intf/sh_mobile_csi2.h>
> -#include <media/soc_camera.h>
> -#include <media/drv-intf/soc_mediabus.h>
> -#include <media/v4l2-common.h>
> -#include <media/v4l2-dev.h>
> -#include <media/v4l2-device.h>
> -#include <media/v4l2-mediabus.h>
> -#include <media/v4l2-subdev.h>
> -
> -#define SH_CSI2_TREF	0x00
> -#define SH_CSI2_SRST	0x04
> -#define SH_CSI2_PHYCNT	0x08
> -#define SH_CSI2_CHKSUM	0x0C
> -#define SH_CSI2_VCDT	0x10
> -
> -struct sh_csi2 {
> -	struct v4l2_subdev		subdev;
> -	unsigned int			irq;
> -	unsigned long			mipi_flags;
> -	void __iomem			*base;
> -	struct platform_device		*pdev;
> -	struct sh_csi2_client_config	*client;
> -};
> -
> -static void sh_csi2_hwinit(struct sh_csi2 *priv);
> -
> -static int sh_csi2_set_fmt(struct v4l2_subdev *sd,
> -		struct v4l2_subdev_pad_config *cfg,
> -		struct v4l2_subdev_format *format)
> -{
> -	struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
> -	struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
> -	struct v4l2_mbus_framefmt *mf = &format->format;
> -	u32 tmp = (priv->client->channel & 3) << 8;
> -
> -	if (format->pad)
> -		return -EINVAL;
> -
> -	if (mf->width > 8188)
> -		mf->width = 8188;
> -	else if (mf->width & 1)
> -		mf->width &= ~1;
> -
> -	switch (pdata->type) {
> -	case SH_CSI2C:
> -		switch (mf->code) {
> -		case MEDIA_BUS_FMT_UYVY8_2X8:		/* YUV422 */
> -		case MEDIA_BUS_FMT_YUYV8_1_5X8:		/* YUV420 */
> -		case MEDIA_BUS_FMT_Y8_1X8:		/* RAW8 */
> -		case MEDIA_BUS_FMT_SBGGR8_1X8:
> -		case MEDIA_BUS_FMT_SGRBG8_1X8:
> -			break;
> -		default:
> -			/* All MIPI CSI-2 devices must support one of primary formats */
> -			mf->code = MEDIA_BUS_FMT_YUYV8_2X8;
> -		}
> -		break;
> -	case SH_CSI2I:
> -		switch (mf->code) {
> -		case MEDIA_BUS_FMT_Y8_1X8:		/* RAW8 */
> -		case MEDIA_BUS_FMT_SBGGR8_1X8:
> -		case MEDIA_BUS_FMT_SGRBG8_1X8:
> -		case MEDIA_BUS_FMT_SBGGR10_1X10:	/* RAW10 */
> -		case MEDIA_BUS_FMT_SBGGR12_1X12:	/* RAW12 */
> -			break;
> -		default:
> -			/* All MIPI CSI-2 devices must support one of primary formats */
> -			mf->code = MEDIA_BUS_FMT_SBGGR8_1X8;
> -		}
> -		break;
> -	}
> -
> -	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> -		cfg->try_fmt = *mf;
> -		return 0;
> -	}
> -
> -	if (mf->width > 8188 || mf->width & 1)
> -		return -EINVAL;
> -
> -	switch (mf->code) {
> -	case MEDIA_BUS_FMT_UYVY8_2X8:
> -		tmp |= 0x1e;	/* YUV422 8 bit */
> -		break;
> -	case MEDIA_BUS_FMT_YUYV8_1_5X8:
> -		tmp |= 0x18;	/* YUV420 8 bit */
> -		break;
> -	case MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE:
> -		tmp |= 0x21;	/* RGB555 */
> -		break;
> -	case MEDIA_BUS_FMT_RGB565_2X8_BE:
> -		tmp |= 0x22;	/* RGB565 */
> -		break;
> -	case MEDIA_BUS_FMT_Y8_1X8:
> -	case MEDIA_BUS_FMT_SBGGR8_1X8:
> -	case MEDIA_BUS_FMT_SGRBG8_1X8:
> -		tmp |= 0x2a;	/* RAW8 */
> -		break;
> -	default:
> -		return -EINVAL;
> -	}
> -
> -	iowrite32(tmp, priv->base + SH_CSI2_VCDT);
> -
> -	return 0;
> -}
> -
> -static int sh_csi2_g_mbus_config(struct v4l2_subdev *sd,
> -				 struct v4l2_mbus_config *cfg)
> -{
> -	struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
> -
> -	if (!priv->mipi_flags) {
> -		struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd);
> -		struct v4l2_subdev *client_sd = soc_camera_to_subdev(icd);
> -		struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
> -		unsigned long common_flags, csi2_flags;
> -		struct v4l2_mbus_config client_cfg = {.type = V4L2_MBUS_CSI2,};
> -		int ret;
> -
> -		/* Check if we can support this camera */
> -		csi2_flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK |
> -			V4L2_MBUS_CSI2_1_LANE;
> -
> -		switch (pdata->type) {
> -		case SH_CSI2C:
> -			if (priv->client->lanes != 1)
> -				csi2_flags |= V4L2_MBUS_CSI2_2_LANE;
> -			break;
> -		case SH_CSI2I:
> -			switch (priv->client->lanes) {
> -			default:
> -				csi2_flags |= V4L2_MBUS_CSI2_4_LANE;
> -			case 3:
> -				csi2_flags |= V4L2_MBUS_CSI2_3_LANE;
> -			case 2:
> -				csi2_flags |= V4L2_MBUS_CSI2_2_LANE;
> -			}
> -		}
> -
> -		ret = v4l2_subdev_call(client_sd, video, g_mbus_config, &client_cfg);
> -		if (ret == -ENOIOCTLCMD)
> -			common_flags = csi2_flags;
> -		else if (!ret)
> -			common_flags = soc_mbus_config_compatible(&client_cfg,
> -								  csi2_flags);
> -		else
> -			common_flags = 0;
> -
> -		if (!common_flags)
> -			return -EINVAL;
> -
> -		/* All good: camera MIPI configuration supported */
> -		priv->mipi_flags = common_flags;
> -	}
> -
> -	if (cfg) {
> -		cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING |
> -			V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
> -			V4L2_MBUS_MASTER | V4L2_MBUS_DATA_ACTIVE_HIGH;
> -		cfg->type = V4L2_MBUS_PARALLEL;
> -	}
> -
> -	return 0;
> -}
> -
> -static int sh_csi2_s_mbus_config(struct v4l2_subdev *sd,
> -				 const struct v4l2_mbus_config *cfg)
> -{
> -	struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
> -	struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd);
> -	struct v4l2_subdev *client_sd = soc_camera_to_subdev(icd);
> -	struct v4l2_mbus_config client_cfg = {.type = V4L2_MBUS_CSI2,};
> -	int ret = sh_csi2_g_mbus_config(sd, NULL);
> -
> -	if (ret < 0)
> -		return ret;
> -
> -	pm_runtime_get_sync(&priv->pdev->dev);
> -
> -	sh_csi2_hwinit(priv);
> -
> -	client_cfg.flags = priv->mipi_flags;
> -
> -	return v4l2_subdev_call(client_sd, video, s_mbus_config, &client_cfg);
> -}
> -
> -static struct v4l2_subdev_video_ops sh_csi2_subdev_video_ops = {
> -	.g_mbus_config	= sh_csi2_g_mbus_config,
> -	.s_mbus_config	= sh_csi2_s_mbus_config,
> -};
> -
> -static struct v4l2_subdev_pad_ops sh_csi2_subdev_pad_ops = {
> -	.set_fmt	= sh_csi2_set_fmt,
> -};
> -
> -static void sh_csi2_hwinit(struct sh_csi2 *priv)
> -{
> -	struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
> -	__u32 tmp = 0x10; /* Enable MIPI CSI clock lane */
> -
> -	/* Reflect registers immediately */
> -	iowrite32(0x00000001, priv->base + SH_CSI2_TREF);
> -	/* reset CSI2 harware */
> -	iowrite32(0x00000001, priv->base + SH_CSI2_SRST);
> -	udelay(5);
> -	iowrite32(0x00000000, priv->base + SH_CSI2_SRST);
> -
> -	switch (pdata->type) {
> -	case SH_CSI2C:
> -		if (priv->client->lanes == 1)
> -			tmp |= 1;
> -		else
> -			/* Default - both lanes */
> -			tmp |= 3;
> -		break;
> -	case SH_CSI2I:
> -		if (!priv->client->lanes || priv->client->lanes > 4)
> -			/* Default - all 4 lanes */
> -			tmp |= 0xf;
> -		else
> -			tmp |= (1 << priv->client->lanes) - 1;
> -	}
> -
> -	if (priv->client->phy == SH_CSI2_PHY_MAIN)
> -		tmp |= 0x8000;
> -
> -	iowrite32(tmp, priv->base + SH_CSI2_PHYCNT);
> -
> -	tmp = 0;
> -	if (pdata->flags & SH_CSI2_ECC)
> -		tmp |= 2;
> -	if (pdata->flags & SH_CSI2_CRC)
> -		tmp |= 1;
> -	iowrite32(tmp, priv->base + SH_CSI2_CHKSUM);
> -}
> -
> -static int sh_csi2_client_connect(struct sh_csi2 *priv)
> -{
> -	struct device *dev = v4l2_get_subdevdata(&priv->subdev);
> -	struct sh_csi2_pdata *pdata = dev->platform_data;
> -	struct soc_camera_device *icd = v4l2_get_subdev_hostdata(&priv->subdev);
> -	int i;
> -
> -	if (priv->client)
> -		return -EBUSY;
> -
> -	for (i = 0; i < pdata->num_clients; i++)
> -		if ((pdata->clients[i].pdev &&
> -		     &pdata->clients[i].pdev->dev == icd->pdev) ||
> -		    (icd->control &&
> -		     strcmp(pdata->clients[i].name, dev_name(icd->control))))
> -			break;
> -
> -	dev_dbg(dev, "%s(%p): found #%d\n", __func__, dev, i);
> -
> -	if (i == pdata->num_clients)
> -		return -ENODEV;
> -
> -	priv->client = pdata->clients + i;
> -
> -	return 0;
> -}
> -
> -static void sh_csi2_client_disconnect(struct sh_csi2 *priv)
> -{
> -	if (!priv->client)
> -		return;
> -
> -	priv->client = NULL;
> -
> -	pm_runtime_put(v4l2_get_subdevdata(&priv->subdev));
> -}
> -
> -static int sh_csi2_s_power(struct v4l2_subdev *sd, int on)
> -{
> -	struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
> -
> -	if (on)
> -		return sh_csi2_client_connect(priv);
> -
> -	sh_csi2_client_disconnect(priv);
> -	return 0;
> -}
> -
> -static struct v4l2_subdev_core_ops sh_csi2_subdev_core_ops = {
> -	.s_power	= sh_csi2_s_power,
> -};
> -
> -static struct v4l2_subdev_ops sh_csi2_subdev_ops = {
> -	.core	= &sh_csi2_subdev_core_ops,
> -	.video	= &sh_csi2_subdev_video_ops,
> -	.pad	= &sh_csi2_subdev_pad_ops,
> -};
> -
> -static int sh_csi2_probe(struct platform_device *pdev)
> -{
> -	struct resource *res;
> -	unsigned int irq;
> -	int ret;
> -	struct sh_csi2 *priv;
> -	/* Platform data specify the PHY, lanes, ECC, CRC */
> -	struct sh_csi2_pdata *pdata = pdev->dev.platform_data;
> -
> -	if (!pdata)
> -		return -EINVAL;
> -
> -	priv = devm_kzalloc(&pdev->dev, sizeof(struct sh_csi2), GFP_KERNEL);
> -	if (!priv)
> -		return -ENOMEM;
> -
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	/* Interrupt unused so far */
> -	irq = platform_get_irq(pdev, 0);
> -
> -	if (!res || (int)irq <= 0) {
> -		dev_err(&pdev->dev, "Not enough CSI2 platform resources.\n");
> -		return -ENODEV;
> -	}
> -
> -	/* TODO: Add support for CSI2I. Careful: different register layout! */
> -	if (pdata->type != SH_CSI2C) {
> -		dev_err(&pdev->dev, "Only CSI2C supported ATM.\n");
> -		return -EINVAL;
> -	}
> -
> -	priv->irq = irq;
> -
> -	priv->base = devm_ioremap_resource(&pdev->dev, res);
> -	if (IS_ERR(priv->base))
> -		return PTR_ERR(priv->base);
> -
> -	priv->pdev = pdev;
> -	priv->subdev.owner = THIS_MODULE;
> -	priv->subdev.dev = &pdev->dev;
> -	platform_set_drvdata(pdev, &priv->subdev);
> -
> -	v4l2_subdev_init(&priv->subdev, &sh_csi2_subdev_ops);
> -	v4l2_set_subdevdata(&priv->subdev, &pdev->dev);
> -
> -	snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s.mipi-csi",
> -		 dev_name(&pdev->dev));
> -
> -	ret = v4l2_async_register_subdev(&priv->subdev);
> -	if (ret < 0)
> -		return ret;
> -
> -	pm_runtime_enable(&pdev->dev);
> -
> -	dev_dbg(&pdev->dev, "CSI2 probed.\n");
> -
> -	return 0;
> -}
> -
> -static int sh_csi2_remove(struct platform_device *pdev)
> -{
> -	struct v4l2_subdev *subdev = platform_get_drvdata(pdev);
> -	struct sh_csi2 *priv = container_of(subdev, struct sh_csi2, subdev);
> -
> -	v4l2_async_unregister_subdev(&priv->subdev);
> -	pm_runtime_disable(&pdev->dev);
> -
> -	return 0;
> -}
> -
> -static struct platform_driver __refdata sh_csi2_pdrv = {
> -	.remove	= sh_csi2_remove,
> -	.probe	= sh_csi2_probe,
> -	.driver	= {
> -		.name	= "sh-mobile-csi2",
> -	},
> -};
> -
> -module_platform_driver(sh_csi2_pdrv);
> -
> -MODULE_DESCRIPTION("SH-Mobile MIPI CSI-2 driver");
> -MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@xxxxxx>");
> -MODULE_LICENSE("GPL v2");
> -MODULE_ALIAS("platform:sh-mobile-csi2");
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux