Hi Javier,
Thank you for the patch.
On Tuesday 23 February 2016 15:48:08 Javier Martinez Canillas wrote:
> This reverts commit 82c2ffeb217a ("[media] tvp5150: document input
> connectors DT bindings") since the DT binding is too device driver
> specific and should instead be more generic and use the bindings
> in Documentation/devicetree/bindings/display/connector/ and linked
> to the tvp5150 using the OF graph port and endpoints.
>
> There are still ongoing discussions about how the input connectors
> will be supported by the Media Controller framework so until that
> is settled, it is better to revert the connectors portion of the
> bindings to avoid known to be broken bindings docs to hit mainline.
>
> Suggested-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>
> ---
>
> .../devicetree/bindings/media/i2c/tvp5150.txt | 43 ------------------
> 1 file changed, 43 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
> b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt index
> daa20e43a8e3..8c0fc1a26bf0 100644
> --- a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
> @@ -12,32 +12,6 @@ Optional Properties:
> - pdn-gpios: phandle for the GPIO connected to the PDN pin, if any.
> - reset-gpios: phandle for the GPIO connected to the RESETB pin, if any.
>
> -Optional nodes:
> -- connectors: The input connectors of tvp5150 have to be defined under
> - a subnode name "connectors" using the following format:
> -
> - input-connector-name {
> - input connector properties
> - };
> -
> -Each input connector must contain the following properties:
> -
> - - label: a name for the connector.
> - - input: the input connector.
> -
> -The possible values for the "input" property are:
> - 0: Composite0
> - 1: Composite1
> - 2: S-Video
> -
> -and on a tvp5150am1 and tvp5151 there is another:
> - 4: Signal generator
> -
> -The list of valid input connectors are defined in
> dt-bindings/media/tvp5150.h -header file and can be included by device tree
> source files.
> -
> -Each input connector can be defined only once.
> -
> The device node must contain one 'port' child node for its digital output
> video port, in accordance with the video interface bindings defined in
> Documentation/devicetree/bindings/media/video-interfaces.txt.
> @@ -62,23 +36,6 @@ Example:
> pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
> reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
>
> - connectors {
> - composite0 {
> - label = "Composite0";
> - input = <TVP5150_COMPOSITE0>;
> - };
> -
> - composite1 {
> - label = "Composite1";
> - input = <TVP5150_COMPOSITE1>;
> - };
> -
> - s-video {
> - label = "S-Video";
> - input = <TVP5150_SVIDEO>;
> - };
> - };
> -
> port {
> tvp5150_1: endpoint {
> remote-endpoint = <&ccdc_ep>;
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
