This patch were a workaround for a regression at tvp5150, but
it causes troubles on devices with omap3+tvp5151 when working
in non-parallel bus mode.
Now that em28xx was fixed, we can get rid of that.
This reverts commit 47de9bf8931e6bf9c92fdba9867925d1ce482ab1.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
---
drivers/media/i2c/tvp5150.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index 779c6f453cc9..437f1a7ecb96 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -975,18 +975,19 @@ static int tvp5150_g_mbus_config(struct v4l2_subdev *sd,
static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
{
struct tvp5150 *decoder = to_tvp5150(sd);
+ /* Output format: 8-bit ITU-R BT.656 with embedded syncs */
+ int val = 0x09;
/* Output format: 8-bit 4:2:2 YUV with discrete sync */
- if (decoder->mbus_type != V4L2_MBUS_PARALLEL)
- return 0;
+ if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
+ val = 0x0d;
/* Initializes TVP5150 to its default values */
/* # set PCLK (27MHz) */
tvp5150_write(sd, TVP5150_CONF_SHARED_PIN, 0x00);
- /* Output format: 8-bit ITU-R BT.656 with embedded syncs */
if (enable)
- tvp5150_write(sd, TVP5150_MISC_CTL, 0x09);
+ tvp5150_write(sd, TVP5150_MISC_CTL, val);
else
tvp5150_write(sd, TVP5150_MISC_CTL, 0x00);
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
