Em Mon, 25 Jan 2016 18:01:21 -0200 Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx> escreveu: > Em Mon, 25 Jan 2016 21:32:21 +0200 > Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> escreveu: > > > Hi Mauro, > > > Let's see, I can't test em28xx, could you try remove the CONF_SHARED_PIN > > change and replacing the write in s_stream with a read-modify-write that > > disables the output (bits 3, 2 and 0) ? If that works I'll test it with the > > omap3 isp when I'll be back home. > > Didn't work. I'll do more tests later (or tomorrow). The root cause weren't at tvp5150 side, but, instead, at em28xx that were only calling s_stream() to disable the stream, but never enabling it. I'm wander why it was doing such thing. Well, s_stream() came years after the em28xx driver, so I suspect it was a hack to fix some issue with a particular device. Let's hope that the change won't cause any regressions on such hardware. The good news is that em28xx doesn't need MISC_CTL to be filled with 0x6f to stream. Just 0x09 is enough. So, the same initialization needed by OMAP3 will work there. I'm posting the patch in a few. > > Regards, > Mauro > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
