Re: [PATCH v3] adv7604: add direct interrupt handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/13/2016 04:15 PM, Ulrich Hecht wrote:
> When probed from device tree, the i2c client driver can handle the
> interrupt on its own.
> 
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> v3: uses IRQ_RETVAL
> 
> v2: implements the suggested style changes and drops the IRQF_TRIGGER_LOW
> flag, which is handled in the device tree.
> 
> 
>  drivers/media/i2c/adv7604.c | 24 ++++++++++++++++++++++--
>  1 file changed, 22 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
> index 5bd81bd..ab4cb25 100644
> --- a/drivers/media/i2c/adv7604.c
> +++ b/drivers/media/i2c/adv7604.c
> @@ -31,6 +31,7 @@
>  #include <linux/gpio/consumer.h>
>  #include <linux/hdmi.h>
>  #include <linux/i2c.h>
> +#include <linux/interrupt.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/slab.h>
> @@ -1971,6 +1972,16 @@ static int adv76xx_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
>  	return 0;
>  }
>  
> +static irqreturn_t adv76xx_irq_handler(int irq, void *devid)
> +{
> +	struct adv76xx_state *state = devid;
> +	bool handled;
> +
> +	adv76xx_isr(&state->sd, 0, &handled);
> +
> +	return IRQ_RETVAL(handled);
> +}
> +
>  static int adv76xx_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
>  {
>  	struct adv76xx_state *state = to_state(sd);
> @@ -2844,8 +2855,7 @@ static int adv76xx_parse_dt(struct adv76xx_state *state)
>  		state->pdata.op_656_range = 1;
>  	}
>  
> -	/* Disable the interrupt for now as no DT-based board uses it. */
> -	state->pdata.int1_config = ADV76XX_INT1_CONFIG_DISABLED;
> +	state->pdata.int1_config = ADV76XX_INT1_CONFIG_ACTIVE_LOW;

Hmm, this hardcodes the interrupt to active low. Can you use the DT to determine
whether it should be active low or high?

Regards,

	Hans

>  
>  	/* Use the default I2C addresses. */
>  	state->pdata.i2c_addresses[ADV7604_PAGE_AVLINK] = 0x42;
> @@ -3235,6 +3245,16 @@ static int adv76xx_probe(struct i2c_client *client,
>  	v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
>  			client->addr << 1, client->adapter->name);
>  
> +	if (client->irq) {
> +		err = devm_request_threaded_irq(&client->dev,
> +						client->irq,
> +						NULL, adv76xx_irq_handler,
> +						IRQF_ONESHOT,
> +						dev_name(&client->dev), state);
> +		if (err)
> +			goto err_entity;
> +	}
> +
>  	err = v4l2_async_register_subdev(sd);
>  	if (err)
>  		goto err_entity;
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux