From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
This is necessary since the *_std_setup functions rely on a valid state->std
field.
Also fix the cx23888_std_setup() to test for 60Hz instead of NTSC, just like
cx25840_std_setup() does.
Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
drivers/media/i2c/cx25840/cx25840-core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c
index a8b1a03..f2e2c34 100644
--- a/drivers/media/i2c/cx25840/cx25840-core.c
+++ b/drivers/media/i2c/cx25840/cx25840-core.c
@@ -4977,7 +4977,7 @@ static void cx23888_std_setup(struct i2c_client *client)
cx25840_write4(client, 0x4b4, 0x20524030);
cx25840_write4(client, 0x47c, 0x010a8263);
- if (std & V4L2_STD_NTSC) {
+ if (std & V4L2_STD_525_60) {
v4l_dbg(1, cx25840_debug, client, "%s() Selecting NTSC",
__func__);
@@ -5268,6 +5268,7 @@ static int cx25840_probe(struct i2c_client *client,
state->id = id;
state->rev = device_id;
state->vbi_regs_offset = id == CX23888_AV ? 0x500 - 0x424 : 0;
+ state->std = V4L2_STD_NTSC_M;
v4l2_ctrl_handler_init(&state->hdl, 9);
v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
