Re: [PATCH] media: adv7180: increase delay after reset to 5ms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ulrich,

(CC'ing Lars-Peter Clausen)

Thank you for the patch.

On Tuesday 10 November 2015 14:39:00 Ulrich Hecht wrote:
> Initialization of the ADV7180 chip fails on the Renesas R8A7790-based
> Lager board about 50% of the time.  This patch resolves the issue by
> increasing the minimum delay after reset from 2 ms to 5 ms, following the
> recommendation in the ADV7180 datasheet:
> 
> "Executing a software reset takes approximately 2 ms. However, it is
> recommended to wait 5 ms before any further I2C writes are performed."
> 
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>

Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

Lars, would you like to take this in your tree with other Analog Devices 
patches, or should I take it ?

> ---
>  drivers/media/i2c/adv7180.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
> index f82c8aa..3c3c4bf 100644
> --- a/drivers/media/i2c/adv7180.c
> +++ b/drivers/media/i2c/adv7180.c
> @@ -1112,7 +1112,7 @@ static int init_device(struct adv7180_state *state)
>  	mutex_lock(&state->mutex);
> 
>  	adv7180_write(state, ADV7180_REG_PWR_MAN, ADV7180_PWR_MAN_RES);
> -	usleep_range(2000, 10000);
> +	usleep_range(5000, 10000);
> 
>  	ret = state->chip_info->init(state);
>  	if (ret)

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux