Thanks Mauro, On 10/03/2015 07:25 AM, Mauro Carvalho Chehab wrote: > Em Mon, 21 Sep 2015 12:08:43 -0700 > Eric Nelson <eric@xxxxxxxxxx> escreveu: > >> A default timeout value of 100ms is workable for most decoders. >> Declare a constant to help standardize its' use. > > I guess the worse case scenario is the NEC protocol: > http://www.sbprojects.com/knowledge/ir/nec.php > > with allows a repeat message to be sent on every 110ms. As the > repeat message is 11.25 ms, that would mean a maximum time without > data for 98.75 ms. So, in thesis, 100 ms would be ok. However, IR > timings are not always precise and may affected by the battery charge. > > So, I think that a timeout of 100ms is too close to 98.75 and may > cause troubles. > > S, IMHO, it is safer to define the default timeout as 125ms. > Sounds good. I'll submit V3 shortly. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
