Hi, Guennadi
Thanks for the review.
On 8/30/2015 4:48 PM, Guennadi Liakhovetski wrote:
Hi Josh,
On Wed, 17 Jun 2015, Josh Wu wrote:
In the function configure_geometry(), we will setup the ISI CFG2
according to the sensor output format.
It make no sense to just read back the CFG2 register and just set part
of it.
So just set up this register directly makes things simpler.
Simpler doesn't necessarily mean better or more correct:) There are other
fields in that register and currently the driver preserves them, with this
patch you overwrite them with 0. 0 happens to be the reset value of that
register. So, you should at least mention that in this patch description,
just saying "simpler" doesn't convince me.
Correct, I should mention that the reset value (0) of cfg2 means the YUV
mode in the commit message.
To use YUV mode we need to clear COL_SPACE (bit 15 of CFG2) and since
the reset value is 0, so in the code, I didn't need do anything.
So, at least I'd modify that, I
can do that myself. But in general I'm not even sure why this patch is
needed. Yes, currently those fields of that register are unused, so, we
can assume they stay at their reset values. But firstly the hardware can
change and at some point the reset value can change, or those other fields
will get set indirectly by something. Or the driver will change at some
point to support more fields of that register and then this code will have
to be changed again.
I understand your concern.
maybe a better solution is explicitly set the COL_SPACE (bit 15) to 0
for the YUV formats. like:
#define ISI_CFG2_COL_SPACE_YUV (0 << 15)
case MEDIA_BUS_FMT_YVYU8_2X8:
cfg2 = ISI_CFG2_COL_SPACE_YUV | ISI_CFG2_YCC_SWAP_MODE_1;
break;
And above modifications can be sent with RGB format support patch in future.
So, I'd ask you again - do you really want this
patch?
yes, this patch is needed. And in future i will add the RGB format settings.
If you insist - I'll take it, but I'd add the "reset value"
reasoning.
That would be great, thank you very much.
Best Regards,
Josh Wu
Otherwise maybe just drop it?
Thanks
Guennadi
Currently only support YUV format from camera sensor.
Signed-off-by: Josh Wu <josh.wu@xxxxxxxxx>
---
drivers/media/platform/soc_camera/atmel-isi.c | 20 +++++++-------------
1 file changed, 7 insertions(+), 13 deletions(-)
diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
index 9070172..8bc40ca 100644
--- a/drivers/media/platform/soc_camera/atmel-isi.c
+++ b/drivers/media/platform/soc_camera/atmel-isi.c
@@ -105,24 +105,25 @@ static u32 isi_readl(struct atmel_isi *isi, u32 reg)
static int configure_geometry(struct atmel_isi *isi, u32 width,
u32 height, u32 code)
{
- u32 cfg2, cr;
+ u32 cfg2;
+ /* According to sensor's output format to set cfg2 */
switch (code) {
/* YUV, including grey */
case MEDIA_BUS_FMT_Y8_1X8:
- cr = ISI_CFG2_GRAYSCALE;
+ cfg2 = ISI_CFG2_GRAYSCALE;
break;
case MEDIA_BUS_FMT_VYUY8_2X8:
- cr = ISI_CFG2_YCC_SWAP_MODE_3;
+ cfg2 = ISI_CFG2_YCC_SWAP_MODE_3;
break;
case MEDIA_BUS_FMT_UYVY8_2X8:
- cr = ISI_CFG2_YCC_SWAP_MODE_2;
+ cfg2 = ISI_CFG2_YCC_SWAP_MODE_2;
break;
case MEDIA_BUS_FMT_YVYU8_2X8:
- cr = ISI_CFG2_YCC_SWAP_MODE_1;
+ cfg2 = ISI_CFG2_YCC_SWAP_MODE_1;
break;
case MEDIA_BUS_FMT_YUYV8_2X8:
- cr = ISI_CFG2_YCC_SWAP_DEFAULT;
+ cfg2 = ISI_CFG2_YCC_SWAP_DEFAULT;
break;
/* RGB, TODO */
default:
@@ -130,17 +131,10 @@ static int configure_geometry(struct atmel_isi *isi, u32 width,
}
isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
-
- cfg2 = isi_readl(isi, ISI_CFG2);
- /* Set YCC swap mode */
- cfg2 &= ~ISI_CFG2_YCC_SWAP_MODE_MASK;
- cfg2 |= cr;
/* Set width */
- cfg2 &= ~(ISI_CFG2_IM_HSIZE_MASK);
cfg2 |= ((width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) &
ISI_CFG2_IM_HSIZE_MASK;
/* Set height */
- cfg2 &= ~(ISI_CFG2_IM_VSIZE_MASK);
cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET)
& ISI_CFG2_IM_VSIZE_MASK;
isi_writel(isi, ISI_CFG2, cfg2);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
