Hello. It is not critical (our multiswitches works with normal disqc too), but should be reported and taken care. Most important are the i2c errors i'm getting: This during module load ------------ Aug 21 04:45:05 dvb-tams2 kernel: [ 5.518270] Attaching STV0900 demodulator(2) Cut=0x30 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.518597] LNBx2x attached on addr=8 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.519359] stv6110x_attach: Attaching STV6110x Aug 21 04:45:05 dvb-tams2 kernel: [ 5.519740] attach tuner input 1 adr 63 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.520160] ddbridge 0000:02:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)... Aug 21 04:45:05 dvb-tams2 kernel: [ 5.523102] Found STV0910 id=0x51 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.524056] hub 2-1:1.0: USB hub found Aug 21 04:45:05 dvb-tams2 kernel: [ 5.524540] hub 2-1:1.0: 6 ports detected Aug 21 04:45:05 dvb-tams2 kernel: [ 5.529937] ndiv = 18, MasterClock = 135000000 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.540615] lnbh25: i2c_write error Aug 21 04:45:05 dvb-tams2 kernel: [ 5.541479] LNB25 on 0c Aug 21 04:45:05 dvb-tams2 kernel: [ 5.544768] attach_init OK Aug 21 04:45:05 dvb-tams2 kernel: [ 5.546639] stv6111_regs = 08 41 8f 12 ce 54 55 45 47 b5 11 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.547047] reg[] = 08 41 8f 02 ce 54 55 45 46 bd 11 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.548011] ddbridge 0000:02:00.0: DVB: registering adapter 2 frontend 0 (STV0910)... Aug 21 04:45:05 dvb-tams2 kernel: [ 5.549037] lnbh25: i2c_write error Aug 21 04:45:05 dvb-tams2 kernel: [ 5.549897] LNB25 on 0d Aug 21 04:45:05 dvb-tams2 kernel: [ 5.552078] attach_init OK Aug 21 04:45:05 dvb-tams2 kernel: [ 5.553953] stv6111_regs = 08 41 8f 12 ce 54 55 45 47 b5 11 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.554400] reg[] = 08 41 8f 02 ce 54 55 45 46 bd 11 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.555401] ddbridge 0000:02:00.0: DVB: registering adapter 3 frontend 0 (STV0910)... Aug 21 04:45:05 dvb-tams2 kernel: [ 5.557056] Found STV0910 id=0x51 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.563966] ndiv = 18, MasterClock = 135000000 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.573658] lnbh25: i2c_write error Aug 21 04:45:05 dvb-tams2 kernel: [ 5.574560] LNB25 on 0c Aug 21 04:45:05 dvb-tams2 kernel: [ 5.576780] attach_init OK Aug 21 04:45:05 dvb-tams2 kernel: [ 5.578680] stv6111_regs = 08 41 8f 12 ce 54 55 45 47 b5 11 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.579121] reg[] = 08 41 8f 02 ce 54 55 45 46 bd 11 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.580113] ddbridge 0000:02:00.0: DVB: registering adapter 4 frontend 0 (STV0910)... Aug 21 04:45:05 dvb-tams2 kernel: [ 5.581138] lnbh25: i2c_write error Aug 21 04:45:05 dvb-tams2 kernel: [ 5.582043] LNB25 on 0d Aug 21 04:45:05 dvb-tams2 kernel: [ 5.584268] attach_init OK Aug 21 04:45:05 dvb-tams2 kernel: [ 5.586166] stv6111_regs = 08 41 8f 12 ce 54 55 45 47 b5 11 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.586611] reg[] = 08 41 8f 02 ce 54 55 45 46 bd 11 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.587615] ddbridge 0000:02:00.0: DVB: registering adapter 5 frontend 0 (STV0910)... Aug 21 04:45:05 dvb-tams2 kernel: [ 5.588598] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter Aug 21 04:45:05 dvb-tams2 kernel: [ 5.589423] DDBridge: HW 0001000d REGMAP 00010004 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.591109] Port 0: Link 0, Link Port 0 (TAB 1): DUAL DVB-S2 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.699984] Port 1: Link 0, Link Port 1 (TAB 2): DUAL DVB-S2 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.808653] Port 2: Link 0, Link Port 2 (TAB 3): DUAL DVB-S2 Aug 21 04:45:05 dvb-tams2 kernel: [ 5.909984] usb 3-3.1: new low-speed USB device number 3 using xhci_hcd Aug 21 04:45:05 dvb-tams2 kernel: [ 5.917763] Port 3: Link 0, Link Port 3 (TAB 4): DUAL DVB-S2 ----------------- And this during tunning: ----------------- Aug 21 04:50:31 dvb-tams2 kernel: [ 335.997919] tuner sleep Aug 21 04:50:31 dvb-tams2 kernel: [ 335.998309] tuner sleep Aug 21 04:50:31 dvb-tams2 kernel: [ 335.998750] sleep 1 Aug 21 04:50:31 dvb-tams2 kernel: [ 335.999403] tuner sleep Aug 21 04:50:31 dvb-tams2 kernel: [ 335.999630] tuner sleep Aug 21 04:50:31 dvb-tams2 kernel: [ 336.000494] sleep 0 Aug 21 04:50:31 dvb-tams2 kernel: [ 336.000496] tuner sleep Aug 21 04:50:31 dvb-tams2 kernel: [ 336.000933] sleep 0 Aug 21 04:50:31 dvb-tams2 kernel: [ 336.001363] tuner sleep Aug 21 04:50:31 dvb-tams2 kernel: [ 336.001976] sleep 0 Aug 21 04:50:31 dvb-tams2 kernel: [ 336.002356] tuner sleep Aug 21 04:50:31 dvb-tams2 kernel: [ 336.002362] sleep 1 Aug 21 04:50:31 dvb-tams2 kernel: [ 336.002415] tuner sleep Aug 21 04:50:31 dvb-tams2 kernel: [ 336.003213] sleep 1 Aug 21 04:50:31 dvb-tams2 kernel: [ 336.003704] sleep 0 Aug 21 04:50:31 dvb-tams2 kernel: [ 336.004144] tuner sleep Aug 21 04:50:31 dvb-tams2 kernel: [ 336.004434] tuner sleep Aug 21 04:50:31 dvb-tams2 kernel: [ 336.004834] sleep 1 Aug 21 04:50:31 dvb-tams2 kernel: [ 336.005568] sleep 0 Aug 21 04:50:31 dvb-tams2 kernel: [ 336.005884] sleep 1 Aug 21 04:50:56 dvb-tams2 kernel: [ 360.979348] init Aug 21 04:50:56 dvb-tams2 kernel: [ 360.984277] init Aug 21 04:50:56 dvb-tams2 kernel: [ 360.986318] init Aug 21 04:50:56 dvb-tams2 kernel: [ 360.987005] init Aug 21 04:50:56 dvb-tams2 kernel: [ 360.988641] init Aug 21 04:50:56 dvb-tams2 kernel: [ 360.988733] init Aug 21 04:50:56 dvb-tams2 kernel: [ 360.989130] init Aug 21 04:50:56 dvb-tams2 kernel: [ 360.990351] init Aug 21 04:50:56 dvb-tams2 kernel: [ 360.990445] init Aug 21 04:50:56 dvb-tams2 kernel: [ 360.992777] init Aug 21 04:50:56 dvb-tams2 kernel: [ 361.383101] F = 1406000, COF = 19850000 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.390553] F = 1406000, COF = 19850000 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.390559] F = 1406000, COF = 19850000 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.391051] F = 1406000, COF = 19850000 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.392043] F = 1406000, COF = 19850000 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.404338] stv6111_regs = 08 41 8f 02 af 00 00 26 3b b1 11 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.404530] reg[] = 08 41 8f 02 af 00 00 26 3a bd 11 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.406148] F = 1406000, COF = 19850000 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.406632] symb = 10679 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.412797] stv6111_regs = 08 41 8f 02 af 00 00 26 3b b1 11 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.412806] stv6111_regs = 08 41 8f 02 af 00 00 26 3b b1 11 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.412807] reg[] = 08 41 8f 02 af 00 00 26 3a bd 11 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.412815] stv6111_regs = 08 41 8f 02 af 00 00 26 3b b1 11 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.412816] reg[] = 08 41 8f 02 af 00 00 26 3a bd 11 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.413030] stv6111_regs = 08 41 8f 02 af 00 00 26 3b b1 11 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.413031] reg[] = 08 41 8f 02 af 00 00 26 3a bd 11 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.414063] reg[] = 08 41 8f 02 af 00 00 26 3a bd 11 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.414362] F = 1406000, COF = 19850000 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.414556] F = 1406000, COF = 19850000 Aug 21 04:50:56 dvb-tams2 kernel: [ 361.414585] F = 1406000, COF = 19850000 A ----------------- Norbert Auge wrote:
Hello Anton, the driver for STV0910 does not support ToneBurst (=minidiseqc). If it is essential for you we can address this in our driver development best regards Dieter -----Ursprüngliche Nachricht----- Von: Anton Tinchev [mailto:atl@xxxxxxxxxxx] Gesendet: Freitag, 21. August 2015 16:33 An: Norbert Auge; linux-media@xxxxxxxxxxxxxxx Cc: Georgi Chorbadzhiyski; Marian Zahariev Betreff: Bugs reporting Hi, can you point me where is usually reported the bugs with the cards firmware and/or drivers. The combination is Cine S2 v6.5 with Duoflex S2 V4. The miniDiSEqC (AB) is not working on the Duoflex S2 V4. Is not board fault, same behavior have all cards i tested - about 20 Duoflex and 8 Cine modules. For the protocol i tested: Cine S2 v6.5 + Duoflex S2 V4: - ports 0 and 1 (Ports on Cine card) - miniDiSEqC is working - ports 0 and 1 (Ports on Cine card) - DiSEqC is working - ports 2 and up (Ports on Duflex cards) - DiSEqC is working - ports 2 and up (Ports on Duflex cards) - miniDiSEqC is NOT WORKING Cine S2 v6.2 + Duoflex S2 older versions: - all ports - both Cine and Duoflex - miniDiSEqC is working - all ports - both Cine and Duoflex - DiSEqC is working Cine S2 v6.5 + Duoflex S2 older version: - Not tested, will test soon Cine S2 v6.2 + Duoflex S2 V4: - Not tested, will test when purchase next batch. Also there is tons of errors on i2c bus to Duoflex S2 V4 tabs. This was tested with latest drivers, also was tested with stock drivers with several kernel versions from 3.18.11 to 4.2 rc2 - same behavior
-- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
