Re: [PATCH v2 05/11] ARM: DT: STi: STiH407: Add c8sectpfe LinuxDVB DT node.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Em Thu, 30 Jul 2015 18:08:55 +0100
Peter Griffin <peter.griffin@xxxxxxxxxx> escreveu:

> This patch adds in the required DT node for the c8sectpfe
> Linux DVB demux driver which allows the tsin channels
> to be used on an upstream kernel.
> 
> Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/stihxxx-b2120.dtsi | 38 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> index 62994ae..1bc018e 100644
> --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
> +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> @@ -6,6 +6,10 @@
>   * it under the terms of the GNU General Public License version 2 as
>   * published by the Free Software Foundation.
>   */
> +
> +#include <dt-bindings/clock/stih407-clks.h>
> +#include <dt-bindings/media/c8sectpfe.h>
> +
>  / {
>  	soc {
>  		sbc_serial0: serial@9530000 {
> @@ -85,5 +89,39 @@
>  			status = "okay";
>  		};
>  
> +		c8sectpfe@08a20000 {
> +			compatible = "st,stih407-c8sectpfe";
> +			status = "okay";
> +			reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>;
> +			reg-names = "c8sectpfe", "c8sectpfe-ram";
> +
> +			interrupts = <0 34 0>, <0 35 0>;
> +			interrupt-names = "c8sectpfe-error-irq",
> +					  "c8sectpfe-idle-irq";
> +
> +			pinctrl-names	= "tsin0-serial", "tsin0-parallel",
> +					  "tsin3-serial", "tsin4-serial",
> +					  "tsin5-serial";
> +
> +			pinctrl-0	= <&pinctrl_tsin0_serial>;
> +			pinctrl-1	= <&pinctrl_tsin0_parallel>;
> +			pinctrl-2	= <&pinctrl_tsin3_serial>;
> +			pinctrl-3	= <&pinctrl_tsin4_serial_alt3>;
> +			pinctrl-4	= <&pinctrl_tsin5_serial_alt1>;
> +
> +			clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>;
> +			clock-names = "c8sectpfe";
> +
> +			/* tsin0 is TSA on NIMA */
> +			tsin0: port@0 {
> +
> +				tsin-num = <0>;
> +				serial-not-parallel;
> +				i2c-bus = <&ssc2>;

There's no ssc2 defined at the device tree.

I'll revert this patch and mark the driver as broken until this gets
fixed.

Regards,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux