Em Fri, 07 Aug 2015 22:55:28 -0300 Helen Fornazier <helen.fornazier@xxxxxxxxx> escreveu: > Hi! > > I've made a first sketch about the API of the vimc driver (virtual > media controller) to configure the topology through user space. > As first suggested by Laurent Pinchart, it is based on configfs. Yeah, configfs seems a good option. > I would like to know you opinion about it, if you have any suggestion > to improve it, otherwise I'll start its implementation as soon as > possible. > This API may change with the MC changes and I may see other possible > configurations as I implementing it but here is the first idea of how > the API will look like. > > vimc project link: https://github.com/helen-fornazier/opw-staging/ > For more information: http://kernelnewbies.org/LaurentPinchart > > /*********************** > The API: > ************************/ > > In short, a topology like this one: http://goo.gl/Y7eUfu > Would look like this filesystem tree: https://goo.gl/tCZPTg > Txt version of the filesystem tree: https://goo.gl/42KX8Y > > * The /configfs/vimc subsystem > The vimc driver registers a subsystem in the configfs with the > following contents: > > ls /configfs/vimc > build_topology status > The build_topology attribute file will be used to tell the driver the > configuration is done and it can build the topology internally > > echo -n "anything here" > /configfs/vimc/build_topology > Reading from the status attribute can have 3 different classes of outputs > 1) deployed: the current configured tree is built > 2) undeployed: no errors, the user has modified the configfs tree thus > the topology was undeployed > 3) error error_message: the topology configuration is wrong > > * Creating an entity: > Use mkdir in the /configfs/vimc to create an entity representation, e.g.: > > mkdir /configfs/vimc/sensor_a > The attribute files will be created by the driver through configfs: > > ls /configfs/vimc/sensor_a > name role > Configure the name that will appear to the /dev/media0 and what this > node do (debayer, scaler, capture, input, generic) > > echo -n "Sensor A" > /configfs/vimc/sensor_a/name > > echo -n "sensor" > /configfs/vimc/sensor_a/role > > * Creating a pad: > Use mkdir inside an entity's folder, the attribute called "direction" > will be automatically created in the process, for example: > > mkdir /configfs/vimc/sensor_a/pad_0 > > ls /configfs/vimc/sensor_a/pad_0 > direction > > echo -n "source" > /configfs/vimc/sensor_a/pad_0/direction > The direction attribute can be "source" or "sink" > > * Creating a link between pads in two steps: > Step 1) > Create a folder inside the source pad folder, the attribute called > "flag" will be automatically created in the process, for example: > > mkdir /configfs/vimc/sensor_a/pad_0/link_to_raw_capture_0/ > > ls /configfs/vimc/sensor_a/pad_0/link_to_raw_capture_0/ > flags > > echo -n "enabled,immutable" > > /configfs/vimc/sensor_a/pad_0/link_to_raw_capture_0/flags > In the flags attribute we can have all the links attributes (enabled, > immutable and dynamic) separated by comma > > Step 2) > Add a symlink between the previous folder we just created in the > source pad and the sink pad folder we want to connect. Lets say we > want to connect with the pad on the raw_capture_0 entity pad 0 > > ln -s /configfs/vimc/sensor_a/pad_0/link_to_raw_capture_0/ > /configfs/vimc/raw_capture_0/pad_0/ > > * Build the topology. > After configuring it, tell the driver we finished: > > echo -n "anything here" > /configfs/vimc/build_topology > > cat /configfs/vimc/status > > NOTE 1: The entity's numbering, as read from /dev/media0, will be the > order of the creation, same about the pads. Pad 0 will be the first > pad created in an entity's folder. > > NOTE 2: Most of the errors will be captured while configuring the > topology, e.g., the user won't be able to setup a link if the pad > which contains the /configfs/ent/pad/link/ folder does not have the > direction attribute set to source and the use can't change the > direction of a pad to sink if it already has a symlink going out of > the current pad. > > NOTE 3: The user won't be able to modify the configfs tree if any > streaming is on. > > > That's it, I hope it is clear. Seems OK. Please notice that we intend to support dynamic changes at the pipeline. So, you may nee to support, in the future, rm and rmmod. Patches for it still need to be written. Regards, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
