Hi Josh,
Thank you for the patch.
On Wednesday 17 June 2015 18:39:39 Josh Wu wrote:
> As in set_fmt() function we only need to know which format is been set,
> we don't need to access the ISI hardware in this moment.
>
> So move the configure_geometry(), which access the ISI hardware, to
> start_streaming() will make code more consistent and simpler.
>
> Signed-off-by: Josh Wu <josh.wu@xxxxxxxxx>
> ---
>
> drivers/media/platform/soc_camera/atmel-isi.c | 17 +++++------------
> 1 file changed, 5 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c
> b/drivers/media/platform/soc_camera/atmel-isi.c index 8bc40ca..b01086d
> 100644
> --- a/drivers/media/platform/soc_camera/atmel-isi.c
> +++ b/drivers/media/platform/soc_camera/atmel-isi.c
> @@ -390,6 +390,11 @@ static int start_streaming(struct vb2_queue *vq,
> unsigned int count) /* Disable all interrupts */
> isi_writel(isi, ISI_INTDIS, (u32)~0UL);
>
> + ret = configure_geometry(isi, icd->user_width, icd->user_height,
> + icd->current_fmt->code);
I would also make configure_geometry a void function, as the only failure case
really can't occur.
Apart from that,
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> + if (ret < 0)
> + return ret;
> +
> spin_lock_irq(&isi->lock);
> /* Clear any pending interrupt */
> isi_readl(isi, ISI_STATUS);
> @@ -477,8 +482,6 @@ static int isi_camera_init_videobuf(struct vb2_queue *q,
> static int isi_camera_set_fmt(struct soc_camera_device *icd,
> struct v4l2_format *f)
> {
> - struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
> - struct atmel_isi *isi = ici->priv;
> struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
> const struct soc_camera_format_xlate *xlate;
> struct v4l2_pix_format *pix = &f->fmt.pix;
> @@ -511,16 +514,6 @@ static int isi_camera_set_fmt(struct soc_camera_device
> *icd, if (mf->code != xlate->code)
> return -EINVAL;
>
> - /* Enable PM and peripheral clock before operate isi registers */
> - pm_runtime_get_sync(ici->v4l2_dev.dev);
> -
> - ret = configure_geometry(isi, pix->width, pix->height, xlate->code);
> -
> - pm_runtime_put(ici->v4l2_dev.dev);
> -
> - if (ret < 0)
> - return ret;
> -
> pix->width = mf->width;
> pix->height = mf->height;
> pix->field = mf->field;
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
