Hi Mauro, On Wed, 22 Jul 2015, Mauro Carvalho Chehab wrote: > Em Wed, 24 Jun 2015 16:11:07 +0100 > Peter Griffin <peter.griffin@xxxxxxxxxx> escreveu: > > > This patch adds support for the following 3 NIM cards: - > > 1) STV0367-NIM (stv0367 demod with Thompson PLL) > > 2) B2100A (2x stv0367 demods & 2x NXP tda18212 tuners) > > 3) STV0903-6110NIM (stv0903 demod + 6110 tuner, lnb24) > > > > Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx> > > --- > > drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c | 296 +++++++++++++++++++++++++++ > > drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.h | 20 ++ > > 2 files changed, 316 insertions(+) > > create mode 100644 drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c > > create mode 100644 drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.h > > > > diff --git a/drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c b/drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c > > new file mode 100644 > > index 0000000..5c4ecb4 > > --- /dev/null > > +++ b/drivers/media/tsin/c8sectpfe/c8sectpfe-dvb.c > > @@ -0,0 +1,296 @@ > > +/* > > + * c8sectpfe-dvb.c - C8SECTPFE STi DVB driver > > + * > > + * Copyright (c) STMicroelectronics 2015 > > + * > > + * Author Peter Griffin <peter.griffin@xxxxxxxxxx> > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * > > + * GNU General Public License for more details. > > + */ > > +#include <linux/completion.h> > > +#include <linux/delay.h> > > +#include <linux/i2c.h> > > +#include <linux/interrupt.h> > > +#include <linux/version.h> > > + > > +#include <dt-bindings/media/c8sectpfe.h> > > + > > +#include "c8sectpfe-common.h" > > +#include "c8sectpfe-core.h" > > +#include "c8sectpfe-dvb.h" > > + > > +#include "dvb-pll.h" > > +#include "lnbh24.h" > > +#include "stv0367.h" > > +#include "stv0367_priv.h" > > +#include "stv6110x.h" > > +#include "stv090x.h" > > +#include "tda18212.h" > > + > > +static inline const char *dvb_card_str(unsigned int c) > > +{ > > + switch (c) { > > + case STV0367_PLL_BOARD_NIMA: return "STV0367_PLL_BOARD_NIMA"; > > + case STV0367_PLL_BOARD_NIMB: return "STV0367_PLL_BOARD_NIMB"; > > + case STV0367_TDA18212_NIMA_1: return "STV0367_TDA18212_NIMA_1"; > > + case STV0367_TDA18212_NIMA_2: return "STV0367_TDA18212_NIMA_2"; > > + case STV0367_TDA18212_NIMB_1: return "STV0367_TDA18212_NIMB_1"; > > + case STV0367_TDA18212_NIMB_2: return "STV0367_TDA18212_NIMB_2"; > > + case STV0903_6110_LNB24_NIMA: return "STV0903_6110_LNB24_NIMA"; > > + case STV0903_6110_LNB24_NIMB: return "STV0903_6110_LNB24_NIMB"; > > + default: return "unknown dvb frontend card"; > > + } > > +} > > + > > +static struct stv090x_config stv090x_config = { > > + .device = STV0903, > > + .demod_mode = STV090x_SINGLE, > > + .clk_mode = STV090x_CLK_EXT, > > + .xtal = 16000000, > > + .address = 0x69, > > + > > + .ts1_mode = STV090x_TSMODE_SERIAL_CONTINUOUS, > > + .ts2_mode = STV090x_TSMODE_SERIAL_CONTINUOUS, > > + > > + .repeater_level = STV090x_RPTLEVEL_64, > > + > > + .tuner_init = NULL, > > + .tuner_set_mode = NULL, > > + .tuner_set_frequency = NULL, > > + .tuner_get_frequency = NULL, > > + .tuner_set_bandwidth = NULL, > > + .tuner_get_bandwidth = NULL, > > + .tuner_set_bbgain = NULL, > > + .tuner_get_bbgain = NULL, > > + .tuner_set_refclk = NULL, > > + .tuner_get_status = NULL, > > +}; > > + > > +static struct stv6110x_config stv6110x_config = { > > + .addr = 0x60, > > + .refclk = 16000000, > > +}; > > + > > +#define NIMA 0 > > +#define NIMB 1 > > + > > +static struct stv0367_config stv0367_pll_config[] = { > > + { > > + .demod_address = 0x1c, > > + .xtal = 27000000, > > + .if_khz = 36166, > > + .if_iq_mode = FE_TER_NORMAL_IF_TUNER, > > + .ts_mode = STV0367_SERIAL_PUNCT_CLOCK, > > + .clk_pol = STV0367_CLOCKPOLARITY_DEFAULT, > > + }, { > > + .demod_address = 0x1d, > > + .xtal = 27000000, > > + .if_khz = 36166, > > + .if_iq_mode = FE_TER_NORMAL_IF_TUNER, > > + .ts_mode = STV0367_SERIAL_PUNCT_CLOCK, > > + .clk_pol = STV0367_CLOCKPOLARITY_DEFAULT, > > + }, > > +}; > > + > > +static struct stv0367_config stv0367_tda18212_config[] = { > > + { > > + .demod_address = 0x1c, > > + .xtal = 16000000, > > + .if_khz = 4500, > > + .if_iq_mode = FE_TER_NORMAL_IF_TUNER, > > + .ts_mode = STV0367_SERIAL_PUNCT_CLOCK, > > + .clk_pol = STV0367_CLOCKPOLARITY_DEFAULT, > > + }, { > > + .demod_address = 0x1d, > > + .xtal = 16000000, > > + .if_khz = 4500, > > + .if_iq_mode = FE_TER_NORMAL_IF_TUNER, > > + .ts_mode = STV0367_SERIAL_PUNCT_CLOCK, > > + .clk_pol = STV0367_CLOCKPOLARITY_DEFAULT, > > + }, { > > + .demod_address = 0x1e, > > + .xtal = 16000000, > > + .if_khz = 4500, > > + .if_iq_mode = FE_TER_NORMAL_IF_TUNER, > > + .ts_mode = STV0367_SERIAL_PUNCT_CLOCK, > > + .clk_pol = STV0367_CLOCKPOLARITY_DEFAULT, > > + }, > > +}; > > + > > +static struct tda18212_config tda18212_conf = { > > + .if_dvbt_6 = 4150, > > + .if_dvbt_7 = 4150, > > + .if_dvbt_8 = 4500, > > + .if_dvbc = 5000, > > +}; > > + > > +int c8sectpfe_frontend_attach(struct dvb_frontend **fe, > > + struct c8sectpfe *c8sectpfe, > > + struct channel_info *tsin, int chan_num) > > +{ > > + struct tda18212_config *tda18212; > > + struct stv6110x_devctl *fe2; > > + struct i2c_client *client; > > + struct i2c_board_info tda18212_info = { > > + .type = "tda18212", > > + .addr = 0x60, > > + }; > > + > > + BUG_ON(!tsin); > > Just return an error if !tsin. Ok will fix in V2 regards, Peter. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html