Adding in the linux-media mailing list > Subject: > Hauppauge hvr1275 TV Tuner card linux problem > > Message: > I had one trouble about Hauppauge hvr1275 TV Tuner card > > Because of I want use tvtime app to play this TV Tuner card with ATI > V4900 VGA Card under centos 6.5 linux 2.6.32-431.el6.i686 > > First I have download Firmeare from: > > # wget > http://steventoth.net/linux/hvr1200/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip > > # wget http://steventoth.net/linux/hvr1200/extract.sh > > # /bin/sh extract.sh > > # sudo cp v4l-cx23885-enc.fw v4l-cx23885-avcore-01.fw > dvb-fe-tda10048-1.0.fw /lib/firmware > > Second create cx23885.conf in /etc/modprobe.d/ > > Options cx23885 card=19 > > Type modprobe cx23885 in terminal > > When I execute tvtime app always show can’t open /dev/video0 > > When I use dmesg in terminal show below > > Linux video capture interface: v2.00 > > cx23885 driver version 0.0.2 loaded > > cx23885 0000:04:00.0: PCI INT A -_ GSI 16 (level, low) -_ IRQ 16 > > CORE cx23885[0]: subsystem: 0070:2a38, board: Hauppauge WinTV-HVR1275 > [card=19,insmod option] > > IR NEC protocol handler initialized > > IR RC5(x) protocol handler initialized > > IR RC6 protocol handler initialized > > IR JVC protocol handler initialized > > IR Sony protocol handler initialized > > lirc_dev: IR Remote Control driver registered, major 248 > > IR LIRC bridge handler initialized > > tveeprom 11-0050: Hauppauge model 161100, rev A1I6, serial# 9140928 > > tveeprom 11-0050: MAC address is 00:0d:fe:8b:7a:c0 > > tveeprom 11-0050: tuner model is unknown (idx 186, type 4) > > tveeprom 11-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') > PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) > > tveeprom 11-0050: audio processor is CX23888 (idx 40) > > tveeprom 11-0050: decoder processor is CX23888 (idx 34) > > tveeprom 11-0050: has no radio, has IR receiver, has no IR > transmitter > > cx23885[0]: warning: unknown hauppauge model #161100 > > cx23885[0]: hauppauge eeprom: model=161100 > > cx23885_dvb_register() allocating 1 frontend(s) > > cx23885[0]: cx23885 based dvb card > > lgdt3305_attach: unable to detect LGDT3305 hardware > > cx23885[0]: frontend initialization failed > > cx23885_dvb_register() dvb_register failed err = -1 > > cx23885_dev_setup() Failed to register dvb on VID_C > > cx23885_dev_checkrevision() Hardware revision = 0xd0 > > cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 16, latency: 0, > mmio: 0xfbe00000 > > cx23885 0000:04:00.0: setting latency timer to 64 > > alloc irq_desc for 34 on node -1 > > alloc kstat_irqs on node -1 > > if use dmesg | grep cx23885 in terminal show below > > cx23885 driver version 0.0.2 loaded > > cx23885 0000:05:00.0: PCI INT A -_ GSI 16 (level, low) -_ IRQ 16 > > CORE cx23885[0]: subsystem: 0070:2a38, board: Hauppauge WinTV-HVR1275 > [card=19,insmod option] > > cx23885[0]: warning: unknown hauppauge model #161100 > > cx23885[0]: hauppauge eeprom: model=161100 > > cx23885_dvb_register() allocating 1 frontend(s) > > cx23885[0]: cx23885 based dvb card > > cx23885[0]: frontend initialization failed > > cx23885_dvb_register() dvb_register failed err = -1 > > cx23885_dev_setup() Failed to register dvb on VID_C > > cx23885_dev_checkrevision() Hardware revision = 0xd0 > > cx23885[0]/0: found at 0000:05:00.0, rev: 4, irq: 16, latency: 0, > mmio: 0xfbe00000 > > cx23885 0000:05:00.0: setting latency timer to 64 > > cx23885 0000:05:00.0: irq 35 for MSI/MSI-X > > sorry I don’t know how can I do .. can you help me to fix the > problem? Please ensure that all communication include the linux media mailing list. It looks like Hauppauge have released an updated HVR-1275 card, as indicated by the updated PCI-SubDevice ID 2A38. The hardware has changed and the driver needs to be modified to support these changes. Modprobing with option=19 isn't going to help. - Steve -- Steven Toth - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
