Re: XC5000C 0x14b4 status

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It's not "new" IC. It's XC5000C. Maybe i was interpreted wrong.
As I have understood, such behaviour can depends from FW version.
HW vendor says, that with his latest FW he always gets response 0x14b4.

Ah, so you're running a completely different firmware image?  Well in
that case that would explain the different response for the firmware
loaded indication.

No no no. I used a FW image, which was taken from KernelLabs site, and it
was intended for use with XC5000C. And partnumber of IC was XC5000C
( I have opened RF shild to check it)

Not a 0x1388. And I think, that these ICs still come without pre-loaded FW.
HW vendor also didn't says anything about FW pre-load possibility.

Correct.  These are not parts that have any form of default firmware
in their ROM mask (i.e. not like the silabs or micronas parts which
have a default firmware and the ability to patch the ROM via a
software loaded code update).  The firmware must be loaded every time
the chip is brought out of reset or it won't work at all.

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux