From: Ian Molton <ian.molton@xxxxxxxxxxxxxxx>
Adds support to the adv7604 driver for specifying the default input
port in the Device tree. If no value is provided, the driver will be
unable to select an input without help from userspace.
Tested-by: William Towle <william.towle@xxxxxxxxxxxxxxx>
Signed-off-by: Ian Molton <ian.molton@xxxxxxxxxxxxxxx>
Acked-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
Documentation/devicetree/bindings/media/i2c/adv7604.txt | 3 +++
drivers/media/i2c/adv7604.c | 8 +++++++-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index 7eafdbc..8337f75 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
@@ -47,6 +47,7 @@ Optional Endpoint Properties:
If none of hsync-active, vsync-active and pclk-sample is specified the
endpoint will use embedded BT.656 synchronization.
+ - default-input: Select which input is selected after reset.
Example:
@@ -60,6 +61,8 @@ Example:
#address-cells = <1>;
#size-cells = <0>;
+ default-input = <0>;
+
port@0 {
reg = <0>;
};
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index ebeddd5..2a89b91 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -2795,6 +2795,7 @@ static int adv76xx_parse_dt(struct adv76xx_state *state)
struct device_node *endpoint;
struct device_node *np;
unsigned int flags;
+ u32 v;
np = state->i2c_clients[ADV76XX_PAGE_IO]->dev.of_node;
@@ -2804,6 +2805,12 @@ static int adv76xx_parse_dt(struct adv76xx_state *state)
return -EINVAL;
v4l2_of_parse_endpoint(endpoint, &bus_cfg);
+
+ if (!of_property_read_u32(endpoint, "default-input", &v))
+ state->pdata.default_input = v;
+ else
+ state->pdata.default_input = -1;
+
of_node_put(endpoint);
flags = bus_cfg.bus.parallel.flags;
@@ -2842,7 +2849,6 @@ static int adv76xx_parse_dt(struct adv76xx_state *state)
/* Hardcode the remaining platform data fields. */
state->pdata.disable_pwrdnb = 0;
state->pdata.disable_cable_det_rst = 0;
- state->pdata.default_input = -1;
state->pdata.blank_data = 1;
state->pdata.alt_data_sat = 1;
state->pdata.op_format_mode_sel = ADV7604_OP_FORMAT_MODE0;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
