Allow userspace applications to subscribe to control change events. This
can e.g. be used to monitor the 5V detect control to be notified when a
source is connected or disconnected.
Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
---
drivers/media/i2c/adv7842.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
index 4cf79b2..ffc0655 100644
--- a/drivers/media/i2c/adv7842.c
+++ b/drivers/media/i2c/adv7842.c
@@ -40,6 +40,7 @@
#include <linux/v4l2-dv-timings.h>
#include <linux/hdmi.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-dv-timings.h>
#include <media/adv7842.h>
@@ -3015,6 +3016,8 @@ static const struct v4l2_subdev_core_ops adv7842_core_ops = {
.log_status = adv7842_log_status,
.ioctl = adv7842_ioctl,
.interrupt_service_routine = adv7842_isr,
+ .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+ .unsubscribe_event = v4l2_event_subdev_unsubscribe,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = adv7842_g_register,
.s_register = adv7842_s_register,
@@ -3210,7 +3213,7 @@ static int adv7842_probe(struct i2c_client *client,
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &adv7842_ops);
- sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
state->mode = pdata->mode;
state->hdmi_port_a = pdata->input == ADV7842_SELECT_HDMI_PORT_A;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
