To support the timings calculations for reduced blanking version 2 (RB v2), command line options now capture version info. Updated the command usage for the same. Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx> Signed-off-by: Prashant Laddha <prladdha@xxxxxxxxx> --- utils/v4l2-ctl/v4l2-ctl-stds.cpp | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/utils/v4l2-ctl/v4l2-ctl-stds.cpp b/utils/v4l2-ctl/v4l2-ctl-stds.cpp index 3e54ff6..aea46c9 100644 --- a/utils/v4l2-ctl/v4l2-ctl-stds.cpp +++ b/utils/v4l2-ctl/v4l2-ctl-stds.cpp @@ -41,7 +41,11 @@ void stds_usage(void) " index=<index>: use the index as provided by --list-dv-timings\n" " or specify timings using cvt/gtf options as follows:\n" " cvt/gtf,width=<width>,height=<height>,fps=<frames per sec>\n" - " interlaced=<0/1>,reduced-blanking=<0/1>\n" + " interlaced=<0/1>,reduced-blanking=<0/1/2>\n" + " The value of reduced-blanking, if greater than 0, indicates\n" + " that reduced blanking is to be used and the value indicate the\n" + " version. For gtf, there is no version 2 for reduced blanking, and\n" + " the value 1 or 2 will give same results.\n" " or give a fully specified timings:\n" " width=<width>,height=<height>,interlaced=<0/1>,\n" " polarities=<polarities mask>,pixelclock=<pixelclock Hz>,\n" @@ -205,7 +209,6 @@ static void get_cvt_gtf_timings(char *subopt, int standard, int fps = 0; int r_blank = 0; int interlaced = 0; - bool timings_valid = false; char *subopt_str = subopt; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in
