Re: [PATCH 04/15] media: adv7604: chip info and formats for ADV7612

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi William,

Two comments, see below.

On 06/03/2015 03:59 PM, William Towle wrote:
> Add support for the ADV7612 chip as implemented on Renesas' Lager
> board to adv7604.c, including lists for formats/colourspace/timing
> selection and an IRQ handler.
> 
> Signed-off-by: William Towle <william.towle@xxxxxxxxxxxxxxx>
> ---
>  drivers/media/i2c/adv7604.c |   91 +++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 87 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
> index aaa37b0..16646517 100644
> --- a/drivers/media/i2c/adv7604.c
> +++ b/drivers/media/i2c/adv7604.c
> @@ -80,6 +80,7 @@ MODULE_LICENSE("GPL");
>  enum adv76xx_type {
>  	ADV7604,
>  	ADV7611,
> +	ADV7612,
>  };
>  
>  struct adv76xx_reg_seq {
> @@ -758,6 +759,23 @@ static const struct adv76xx_format_info adv7611_formats[] = {
>  	  ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_12BIT },
>  };
>  
> +static const struct adv76xx_format_info adv7612_formats[] = {
> +	{ MEDIA_BUS_FMT_RGB888_1X24, ADV76XX_OP_CH_SEL_RGB, true, false,
> +	  ADV76XX_OP_MODE_SEL_SDR_444 | ADV76XX_OP_FORMAT_SEL_8BIT },
> +	{ MEDIA_BUS_FMT_YUYV8_2X8, ADV76XX_OP_CH_SEL_RGB, false, false,
> +	  ADV76XX_OP_MODE_SEL_SDR_422 | ADV76XX_OP_FORMAT_SEL_8BIT },
> +	{ MEDIA_BUS_FMT_YVYU8_2X8, ADV76XX_OP_CH_SEL_RGB, false, true,
> +	  ADV76XX_OP_MODE_SEL_SDR_422 | ADV76XX_OP_FORMAT_SEL_8BIT },
> +	{ MEDIA_BUS_FMT_UYVY8_1X16, ADV76XX_OP_CH_SEL_RBG, false, false,
> +	  ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
> +	{ MEDIA_BUS_FMT_VYUY8_1X16, ADV76XX_OP_CH_SEL_RBG, false, true,
> +	  ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
> +	{ MEDIA_BUS_FMT_YUYV8_1X16, ADV76XX_OP_CH_SEL_RGB, false, false,
> +	  ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
> +	{ MEDIA_BUS_FMT_YVYU8_1X16, ADV76XX_OP_CH_SEL_RGB, false, true,
> +	  ADV76XX_OP_MODE_SEL_SDR_422_2X | ADV76XX_OP_FORMAT_SEL_8BIT },
> +};
> +
>  static const struct adv76xx_format_info *
>  adv76xx_format_info(struct adv76xx_state *state, u32 code)
>  {
> @@ -2471,6 +2489,11 @@ static void adv7611_setup_irqs(struct v4l2_subdev *sd)
>  	io_write(sd, 0x41, 0xd0); /* STDI irq for any change, disable INT2 */
>  }
>  
> +static void adv7612_setup_irqs(struct v4l2_subdev *sd)
> +{
> +	io_write(sd, 0x41, 0xd0); /* disable INT2 */
> +}
> +
>  static void adv76xx_unregister_clients(struct adv76xx_state *state)
>  {
>  	unsigned int i;
> @@ -2558,6 +2581,19 @@ static const struct adv76xx_reg_seq adv7611_recommended_settings_hdmi[] = {
>  	{ ADV76XX_REG_SEQ_TERM, 0 },
>  };
>  
> +static const struct adv76xx_reg_seq adv7612_recommended_settings_hdmi[] = {
> +	{ ADV76XX_REG(ADV76XX_PAGE_CP, 0x6c), 0x00 },
> +	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x9b), 0x03 },
> +	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x6f), 0x08 },
> +	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x85), 0x1f },
> +	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x87), 0x70 },
> +	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x57), 0xda },
> +	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x58), 0x01 },
> +	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x03), 0x98 },
> +	{ ADV76XX_REG(ADV76XX_PAGE_HDMI, 0x4c), 0x44 },
> +	{ ADV76XX_REG_SEQ_TERM, 0 },
> +};
> +
>  static const struct adv76xx_chip_info adv76xx_chip_info[] = {
>  	[ADV7604] = {
>  		.type = ADV7604,
> @@ -2646,17 +2682,59 @@ static const struct adv76xx_chip_info adv76xx_chip_info[] = {
>  		.field1_vsync_mask = 0x3fff,
>  		.field1_vbackporch_mask = 0x3fff,
>  	},
> +	[ADV7612] = {
> +		.type = ADV7612,
> +		.has_afe = false,
> +		.max_port = ADV7604_PAD_HDMI_PORT_B,
> +		.num_dv_ports = 2,
> +		.edid_enable_reg = 0x74,
> +		.edid_status_reg = 0x76,
> +		.lcf_reg = 0xa3,
> +		.tdms_lock_mask = 0x43,

This looks strange: with two inputs I expect two bits set in the mask, not three.

> +		.cable_det_mask = 0x01,

Same here: I expect to see two bits set, not one.

> +		.fmt_change_digital_mask = 0x03,
> +		.formats = adv7612_formats,
> +		.nformats = ARRAY_SIZE(adv7612_formats),
> +		.set_termination = adv7611_set_termination,
> +		.setup_irqs = adv7612_setup_irqs,
> +		.read_hdmi_pixelclock = adv7611_read_hdmi_pixelclock,
> +		.read_cable_det = adv7611_read_cable_det,
> +		.recommended_settings = {
> +		    [1] = adv7612_recommended_settings_hdmi,
> +		},
> +		.num_recommended_settings = {
> +		    [1] = ARRAY_SIZE(adv7612_recommended_settings_hdmi),
> +		},
> +		.page_mask = BIT(ADV76XX_PAGE_IO) | BIT(ADV76XX_PAGE_CEC) |
> +			BIT(ADV76XX_PAGE_INFOFRAME) | BIT(ADV76XX_PAGE_AFE) |
> +			BIT(ADV76XX_PAGE_REP) |  BIT(ADV76XX_PAGE_EDID) |
> +			BIT(ADV76XX_PAGE_HDMI) | BIT(ADV76XX_PAGE_CP),
> +		.linewidth_mask = 0x1fff,
> +		.field0_height_mask = 0x1fff,
> +		.field1_height_mask = 0x1fff,
> +		.hfrontporch_mask = 0x1fff,
> +		.hsync_mask = 0x1fff,
> +		.hbackporch_mask = 0x1fff,
> +		.field0_vfrontporch_mask = 0x3fff,
> +		.field0_vsync_mask = 0x3fff,
> +		.field0_vbackporch_mask = 0x3fff,
> +		.field1_vfrontporch_mask = 0x3fff,
> +		.field1_vsync_mask = 0x3fff,
> +		.field1_vbackporch_mask = 0x3fff,
> +	},
>  };
>  
>  static const struct i2c_device_id adv76xx_i2c_id[] = {
>  	{ "adv7604", (kernel_ulong_t)&adv76xx_chip_info[ADV7604] },
>  	{ "adv7611", (kernel_ulong_t)&adv76xx_chip_info[ADV7611] },
> +	{ "adv7612", (kernel_ulong_t)&adv76xx_chip_info[ADV7612] },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(i2c, adv76xx_i2c_id);
>  
>  static const struct of_device_id adv76xx_of_id[] __maybe_unused = {
>  	{ .compatible = "adi,adv7611", .data = &adv76xx_chip_info[ADV7611] },
> +	{ .compatible = "adi,adv7612", .data = &adv76xx_chip_info[ADV7612] },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, adv76xx_of_id);
> @@ -2801,21 +2879,26 @@ static int adv76xx_probe(struct i2c_client *client,
>  	 * identifies the revision, while on ADV7611 it identifies the model as
>  	 * well. Use the HDMI slave address on ADV7604 and RD_INFO on ADV7611.
>  	 */
> -	if (state->info->type == ADV7604) {
> +	switch (state->info->type) {
> +	case ADV7604:
>  		val = adv_smbus_read_byte_data_check(client, 0xfb, false);
>  		if (val != 0x68) {
>  			v4l2_info(sd, "not an adv7604 on address 0x%x\n",
>  					client->addr << 1);
>  			return -ENODEV;
>  		}
> -	} else {
> +		break;
> +	case ADV7611:
> +	case ADV7612:
>  		val = (adv_smbus_read_byte_data_check(client, 0xea, false) << 8)
>  		    | (adv_smbus_read_byte_data_check(client, 0xeb, false) << 0);
> -		if (val != 0x2051) {
> -			v4l2_info(sd, "not an adv7611 on address 0x%x\n",
> +		if ((state->info->type == ADV7611 && val != 0x2051) ||
> +			(state->info->type == ADV7612 && val != 0x2041)) {
> +			v4l2_info(sd, "not an adv761x on address 0x%x\n",
>  					client->addr << 1);
>  			return -ENODEV;
>  		}
> +		break;
>  	}
>  
>  	/* control handlers */
> 

Regards,

	Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux