Hi Mauro, I am re-submitting my patch for remote control support of mantis based DVB cards for the 3rd time. The last submission can be found here [1]. It has been rebased and tested on v4.0. It has been working fine on my HTPC for almost three years now. Compared to the previous submission I've split the patch into the individual rc key tables and the actual mantis rc support. I am really hoping that the patch will be applied this time. These cards are still in use and people have to patch their kernel to get them fully working. I recently got some feedback that it is working for other too. This patch has been tested on a TechniSat CableStar HD2. Other rc-maps were taken from Christoph Pinkl's patch [2] and the s2-liplianin repository. The major difference to Christoph's patch is a reworked interrupt handling of the UART because the RX interrupt is apparently level triggered and requires masking until the FIFO is read by the UART worker. Tested-by: Thomas Müller <mailaccountfueralles@xxxxxx> [1] https://patchwork.linuxtv.org/patch/26321/ [2] http://patchwork.linuxtv.org/patch/7217/ --- drivers/media/pci/mantis/hopper_cards.c | 13 ++- drivers/media/pci/mantis/mantis_cards.c | 60 +++++++++--- drivers/media/pci/mantis/mantis_common.h | 33 ++++++- drivers/media/pci/mantis/mantis_dma.c | 5 +- drivers/media/pci/mantis/mantis_i2c.c | 8 +- drivers/media/pci/mantis/mantis_input.c | 106 ++++----------------- drivers/media/pci/mantis/mantis_input.h | 28 ++++++ drivers/media/pci/mantis/mantis_pcmcia.c | 4 +- drivers/media/pci/mantis/mantis_uart.c | 62 ++++++------ drivers/media/rc/keymaps/Makefile | 4 + drivers/media/rc/keymaps/rc-technisat-ts35.c | 76 +++++++++++++++ .../media/rc/keymaps/rc-terratec-cinergy-c-pci.c | 88 +++++++++++++++++ .../media/rc/keymaps/rc-terratec-cinergy-s2-hd.c | 86 +++++++++++++++++ drivers/media/rc/keymaps/rc-twinhan-dtv-cab-ci.c | 98 +++++++++++++++++++ include/media/rc-map.h | 4 + 15 files changed, 526 insertions(+), 149 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
