On 06/06/2015 10:44 AM, Olli Salonen wrote:
The i2c_reg_len for Si2168 should be 0 for correct I2C communication.
Signed-off-by: Olli Salonen <olli.salonen@xxxxxx>
Reviewed-by: Antti Palosaari <crope@xxxxxx>
PS. As I mentioned few times already, that kind I2C client register map
layout information does not belongs to adapter level at all. I wonder
why it is here. Likely some further clean-ups are possible.
regards
Antti
---
drivers/media/pci/saa7164/saa7164-cards.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/pci/saa7164/saa7164-cards.c b/drivers/media/pci/saa7164/saa7164-cards.c
index 8a6455d..c2b7382 100644
--- a/drivers/media/pci/saa7164/saa7164-cards.c
+++ b/drivers/media/pci/saa7164/saa7164-cards.c
@@ -621,7 +621,7 @@ struct saa7164_board saa7164_boards[] = {
.name = "SI2168-1",
.i2c_bus_nr = SAA7164_I2C_BUS_2,
.i2c_bus_addr = 0xc8 >> 1,
- .i2c_reg_len = REGLEN_8bit,
+ .i2c_reg_len = REGLEN_0bit,
}, {
.id = 0x25,
.type = SAA7164_UNIT_TUNER,
@@ -635,7 +635,7 @@ struct saa7164_board saa7164_boards[] = {
.name = "SI2168-2",
.i2c_bus_nr = SAA7164_I2C_BUS_2,
.i2c_bus_addr = 0xcc >> 1,
- .i2c_reg_len = REGLEN_8bit,
+ .i2c_reg_len = REGLEN_0bit,
} },
},
};
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
