Although the recommended usage is the DVBv5 API calls, the documentation doesn't make it clear about what's the recommended calls and what's legacy. So, move the legacy API bits to a separate xml, putting them into a new section. Please notice that more changes are needed, since some of the bits there are cross-referenced elsewhere. Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx> create mode 100644 Documentation/DocBook/media/dvb/frontend_legacy_api.xml diff --git a/Documentation/DocBook/media/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml index 98443c4c2818..3b3973aee8eb 100644 --- a/Documentation/DocBook/media/dvb/frontend.xml +++ b/Documentation/DocBook/media/dvb/frontend.xml @@ -29,58 +29,6 @@ specification is available at <ulink url="http://www.eutelsat.com/satellites/4_5_5.html";>Eutelsat</ulink>.</para> -<section id="frontend_types"> -<title>Frontend Data Types</title> - -<section id="fe-type-t"> -<title>Frontend type</title> - -<para>For historical reasons, frontend types are named by the type of modulation - used in transmission. The fontend types are given by fe_type_t type, defined as:</para> - -<table pgwide="1" frame="none" id="fe-type"> -<title>Frontend types</title> -<tgroup cols="3"> - &cs-def; - <thead> - <row> - <entry>fe_type</entry> - <entry>Description</entry> - <entry><link linkend="DTV-DELIVERY-SYSTEM">DTV_DELIVERY_SYSTEM</link> equivalent type</entry> - </row> - </thead> - <tbody valign="top"> - <row> - <entry id="FE_QPSK"><constant>FE_QPSK</constant></entry> - <entry>For DVB-S standard</entry> - <entry><constant>SYS_DVBS</constant></entry> - </row> - <row> - <entry id="FE_QAM"><constant>FE_QAM</constant></entry> - <entry>For DVB-C annex A standard</entry> - <entry><constant>SYS_DVBC_ANNEX_A</constant></entry> - </row> - <row> - <entry id="FE_OFDM"><constant>FE_OFDM</constant></entry> - <entry>For DVB-T standard</entry> - <entry><constant>SYS_DVBT</constant></entry> - </row> - <row> - <entry id="FE_ATSC"><constant>FE_ATSC</constant></entry> - <entry>For ATSC standard (terrestrial) or for DVB-C Annex B (cable) used in US.</entry> - <entry><constant>SYS_ATSC</constant> (terrestrial) or <constant>SYS_DVBC_ANNEX_B</constant> (cable)</entry> - </row> -</tbody></tgroup></table> - -<para>Newer formats like DVB-S2, ISDB-T, ISDB-S and DVB-T2 are not described at the above, as they're -supported via the new <link linkend="FE_GET_SET_PROPERTY">FE_GET_PROPERTY/FE_GET_SET_PROPERTY</link> ioctl's, using the <link linkend="DTV-DELIVERY-SYSTEM">DTV_DELIVERY_SYSTEM</link> parameter. -</para> - -<para>The usage of this field is deprecated, as it doesn't report all supported standards, and -will provide an incomplete information for frontends that support multiple delivery systems. -Please use <link linkend="DTV-ENUM-DELSYS">DTV_ENUM_DELSYS</link> instead.</para> -</section> - <section id="fe-caps-t"> <title>frontend capabilities</title> @@ -157,6 +105,7 @@ a specific frontend type.</para> }; </programlisting> </section> + <section role="subsection" id="dvb-diseqc-slave-reply"> <title>diseqc slave reply</title> @@ -258,90 +207,8 @@ typedef enum fe_status { recommended to reset DiSEqC, tone and parameters</entry> </row> </tbody></tgroup></informaltable> - </section> -<section id="dvb-frontend-parameters"> -<title>frontend parameters</title> -<para>The kind of parameters passed to the frontend device for tuning depend on -the kind of hardware you are using.</para> -<para>The struct <constant>dvb_frontend_parameters</constant> uses an -union with specific per-system parameters. However, as newer delivery systems -required more data, the structure size weren't enough to fit, and just -extending its size would break the existing applications. So, those parameters -were replaced by the usage of <link linkend="FE_GET_SET_PROPERTY"> -<constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></link> ioctl's. The -new API is flexible enough to add new parameters to existing delivery systems, -and to add newer delivery systems.</para> -<para>So, newer applications should use <link linkend="FE_GET_SET_PROPERTY"> -<constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></link> instead, in -order to be able to support the newer System Delivery like DVB-S2, DVB-T2, -DVB-C2, ISDB, etc.</para> -<para>All kinds of parameters are combined as an union in the FrontendParameters structure: -<programlisting> -struct dvb_frontend_parameters { - uint32_t frequency; /⋆ (absolute) frequency in Hz for QAM/OFDM ⋆/ - /⋆ intermediate frequency in kHz for QPSK ⋆/ - fe_spectral_inversion_t inversion; - union { - struct dvb_qpsk_parameters qpsk; - struct dvb_qam_parameters qam; - struct dvb_ofdm_parameters ofdm; - struct dvb_vsb_parameters vsb; - } u; -}; -</programlisting></para> -<para>In the case of QPSK frontends the <constant>frequency</constant> field specifies the intermediate -frequency, i.e. the offset which is effectively added to the local oscillator frequency (LOF) of -the LNB. The intermediate frequency has to be specified in units of kHz. For QAM and -OFDM frontends the <constant>frequency</constant> specifies the absolute frequency and is given in Hz. -</para> - -<section id="dvb-qpsk-parameters"> -<title>QPSK parameters</title> -<para>For satellite QPSK frontends you have to use the <constant>dvb_qpsk_parameters</constant> structure:</para> -<programlisting> - struct dvb_qpsk_parameters { - uint32_t symbol_rate; /⋆ symbol rate in Symbols per second ⋆/ - fe_code_rate_t fec_inner; /⋆ forward error correction (see above) ⋆/ - }; -</programlisting> -</section> -<section id="dvb-qam-parameters"> -<title>QAM parameters</title> -<para>for cable QAM frontend you use the <constant>dvb_qam_parameters</constant> structure:</para> -<programlisting> - struct dvb_qam_parameters { - uint32_t symbol_rate; /⋆ symbol rate in Symbols per second ⋆/ - fe_code_rate_t fec_inner; /⋆ forward error correction (see above) ⋆/ - fe_modulation_t modulation; /⋆ modulation type (see above) ⋆/ - }; -</programlisting> -</section> -<section id="dvb-vsb-parameters"> -<title>VSB parameters</title> -<para>ATSC frontends are supported by the <constant>dvb_vsb_parameters</constant> structure:</para> -<programlisting> -struct dvb_vsb_parameters { - fe_modulation_t modulation; /⋆ modulation type (see above) ⋆/ -}; -</programlisting> -</section> -<section id="dvb-ofdm-parameters"> -<title>OFDM parameters</title> -<para>DVB-T frontends are supported by the <constant>dvb_ofdm_parameters</constant> structure:</para> -<programlisting> - struct dvb_ofdm_parameters { - fe_bandwidth_t bandwidth; - fe_code_rate_t code_rate_HP; /⋆ high priority stream code rate ⋆/ - fe_code_rate_t code_rate_LP; /⋆ low priority stream code rate ⋆/ - fe_modulation_t constellation; /⋆ modulation type (see above) ⋆/ - fe_transmit_mode_t transmission_mode; - fe_guard_interval_t guard_interval; - fe_hierarchy_t hierarchy_information; - }; -</programlisting> -</section> <section id="fe-spectral-inversion-t"> <title>frontend spectral inversion</title> <para>The Inversion field can take one of these values: @@ -358,6 +225,7 @@ typedef enum fe_spectral_inversion { itself. </para> </section> + <section id="fe-code-rate-t"> <title>frontend code rate</title> <para>The possible values for the <constant>fec_inner</constant> field used on @@ -384,6 +252,7 @@ typedef enum fe_code_rate { detection. </para> </section> + <section id="fe-modulation-t"> <title>frontend modulation type for QAM, OFDM and VSB</title> <para>For cable and terrestrial frontends, e. g. for @@ -410,8 +279,10 @@ it needs to specify the quadrature modulation mode which can be one of the follo } fe_modulation_t; </programlisting> </section> + <section> <title>More OFDM parameters</title> + <section id="fe-transmit-mode-t"> <title>Number of carriers per channel</title> <programlisting> @@ -426,6 +297,7 @@ typedef enum fe_transmit_mode { } fe_transmit_mode_t; </programlisting> </section> + <section id="fe-bandwidth-t"> <title>frontend bandwidth</title> <programlisting> @@ -440,6 +312,7 @@ typedef enum fe_bandwidth { } fe_bandwidth_t; </programlisting> </section> + <section id="fe-guard-interval-t"> <title>frontend guard inverval</title> <programlisting> @@ -455,6 +328,7 @@ typedef enum fe_guard_interval { } fe_guard_interval_t; </programlisting> </section> + <section id="fe-hierarchy-t"> <title>frontend hierarchy</title> <programlisting> @@ -467,22 +341,9 @@ typedef enum fe_hierarchy { } fe_hierarchy_t; </programlisting> </section> -</section> - -</section> -<section id="dvb-frontend-event"> -<title>frontend events</title> - <programlisting> - struct dvb_frontend_event { - fe_status_t status; - struct dvb_frontend_parameters parameters; - }; -</programlisting> - </section> </section> - <section id="frontend_fcalls"> <title>Frontend Function Calls</title> @@ -694,417 +555,6 @@ typedef enum fe_hierarchy { </row></tbody></tgroup></informaltable> </section> -<section id="FE_READ_BER"> -<title>FE_READ_BER</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call returns the bit error rate for the signal currently - received/demodulated by the front-end. For this command, read-only access to - the device is sufficient.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(int fd, int request = <link linkend="FE_READ_BER">FE_READ_BER</link>, - uint32_t ⋆ber);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals <link linkend="FE_READ_BER">FE_READ_BER</link> for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>uint32_t *ber</para> -</entry><entry - align="char"> -<para>The bit error rate is stored into *ber.</para> -</entry> - </row></tbody></tgroup></informaltable> - -&return-value-dvb; -</section> - -<section id="FE_READ_SNR"> -<title>FE_READ_SNR</title> - -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call returns the signal-to-noise ratio for the signal currently received - by the front-end. For this command, read-only access to the device is sufficient.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(int fd, int request = <link linkend="FE_READ_SNR">FE_READ_SNR</link>, uint16_t - ⋆snr);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals <link linkend="FE_READ_SNR">FE_READ_SNR</link> for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>uint16_t *snr</para> -</entry><entry - align="char"> -<para>The signal-to-noise ratio is stored into *snr.</para> -</entry> - </row></tbody></tgroup></informaltable> - -&return-value-dvb; -</section> - -<section id="FE_READ_SIGNAL_STRENGTH"> -<title>FE_READ_SIGNAL_STRENGTH</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call returns the signal strength value for the signal currently received - by the front-end. For this command, read-only access to the device is sufficient.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl( int fd, int request = - <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link>, uint16_t ⋆strength);</para> -</entry> - </row></tbody></tgroup></informaltable> - -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link> for this - command.</para> -</entry> - </row><row><entry - align="char"> -<para>uint16_t *strength</para> -</entry><entry - align="char"> -<para>The signal strength value is stored into *strength.</para> -</entry> - </row></tbody></tgroup></informaltable> - -&return-value-dvb; -</section> - -<section id="FE_READ_UNCORRECTED_BLOCKS"> -<title>FE_READ_UNCORRECTED_BLOCKS</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call returns the number of uncorrected blocks detected by the device - driver during its lifetime. For meaningful measurements, the increment in block - count during a specific time interval should be calculated. For this command, - read-only access to the device is sufficient.</para> -</entry> - </row><row><entry - align="char"> -<para>Note that the counter will wrap to zero after its maximum count has been - reached.</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl( int fd, int request = - <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link>, uint32_t ⋆ublocks);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link> for this - command.</para> -</entry> - </row><row><entry - align="char"> -<para>uint32_t *ublocks</para> -</entry><entry - align="char"> -<para>The total number of uncorrected blocks seen by the driver - so far.</para> -</entry> - </row></tbody></tgroup></informaltable> - -&return-value-dvb; -</section> - -<section id="FE_SET_FRONTEND"> -<title>FE_SET_FRONTEND</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call starts a tuning operation using specified parameters. The result - of this call will be successful if the parameters were valid and the tuning could - be initiated. The result of the tuning operation in itself, however, will arrive - asynchronously as an event (see documentation for <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> and - FrontendEvent.) If a new <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> operation is initiated before - the previous one was completed, the previous operation will be aborted in favor - of the new one. This command requires read/write access to the device.</para> -</entry> - </row></tbody></tgroup></informaltable> - -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(int fd, int request = <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link>, - struct dvb_frontend_parameters ⋆p);</para> -</entry> - </row></tbody></tgroup></informaltable> -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>struct - dvb_frontend_parameters - *p</para> -</entry><entry - align="char"> -<para>Points to parameters for tuning operation.</para> -</entry> - </row></tbody></tgroup></informaltable> - -&return-value-dvb; -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>Maximum supported symbol rate reached.</para> -</entry> -</row></tbody></tgroup></informaltable> -</section> - -<section id="FE_GET_FRONTEND"> -<title>FE_GET_FRONTEND</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call queries the currently effective frontend parameters. For this - command, read-only access to the device is sufficient.</para> -</entry> - </row></tbody></tgroup></informaltable> - -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(int fd, int request = <link linkend="FE_GET_FRONTEND">FE_GET_FRONTEND</link>, - struct dvb_frontend_parameters ⋆p);</para> -</entry> - </row></tbody></tgroup></informaltable> - -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>struct - dvb_frontend_parameters - *p</para> -</entry><entry - align="char"> -<para>Points to parameters for tuning operation.</para> -</entry> - </row></tbody></tgroup></informaltable> - -&return-value-dvb; -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EINVAL</para> -</entry><entry - align="char"> -<para>Maximum supported symbol rate reached.</para> -</entry> - </row></tbody></tgroup></informaltable> - -</section> - -<section id="FE_GET_EVENT"> -<title>FE_GET_EVENT</title> -<para>DESCRIPTION -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>This ioctl call returns a frontend event if available. If an event is not - available, the behavior depends on whether the device is in blocking or - non-blocking mode. In the latter case, the call fails immediately with errno - set to EWOULDBLOCK. In the former case, the call blocks until an event - becomes available.</para> -</entry> - </row><row><entry - align="char"> -<para>The standard Linux poll() and/or select() system calls can be used with the - device file descriptor to watch for new events. For select(), the file descriptor - should be included in the exceptfds argument, and for poll(), POLLPRI should - be specified as the wake-up condition. Since the event queue allocated is - rather small (room for 8 events), the queue must be serviced regularly to avoid - overflow. If an overflow happens, the oldest event is discarded from the queue, - and an error (EOVERFLOW) occurs the next time the queue is read. After - reporting the error condition in this fashion, subsequent - <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> - calls will return events from the queue as usual.</para> -</entry> - </row><row><entry - align="char"> -<para>For the sake of implementation simplicity, this command requires read/write - access to the device.</para> -</entry> - </row></tbody></tgroup></informaltable> - -<para>SYNOPSIS -</para> -<informaltable><tgroup cols="1"><tbody><row><entry - align="char"> -<para>int ioctl(int fd, int request = QPSK_GET_EVENT, - struct dvb_frontend_event ⋆ev);</para> -</entry> - </row></tbody></tgroup></informaltable> - -<para>PARAMETERS -</para> -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>int fd</para> -</entry><entry - align="char"> -<para>File descriptor returned by a previous call to open().</para> -</entry> - </row><row><entry - align="char"> -<para>int request</para> -</entry><entry - align="char"> -<para>Equals <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> for this command.</para> -</entry> - </row><row><entry - align="char"> -<para>struct - dvb_frontend_event - *ev</para> -</entry><entry - align="char"> -<para>Points to the location where the event,</para> -</entry> - </row><row><entry - align="char"> -</entry><entry - align="char"> -<para>if any, is to be stored.</para> -</entry> - </row></tbody></tgroup></informaltable> - -&return-value-dvb; -<informaltable><tgroup cols="2"><tbody><row><entry - align="char"> -<para>EWOULDBLOCK</para> -</entry><entry - align="char"> -<para>There is no event pending, and the device is in - non-blocking mode.</para> -</entry> - </row><row><entry - align="char"> -<para>EOVERFLOW</para> -</entry><entry - align="char"> -<para>Overflow in event queue - one or more events were lost.</para> -</entry> -</row></tbody></tgroup></informaltable> -</section> - <section id="FE_GET_INFO"> <title>FE_GET_INFO</title> <para>DESCRIPTION @@ -1521,40 +971,15 @@ FE_TUNE_MODE_ONESHOT When set, this flag will disable any zigzagging or other "n &return-value-dvb; </section> -<section id="FE_DISHNETWORK_SEND_LEGACY_CMD"> - <title>FE_DISHNETWORK_SEND_LEGACY_CMD</title> -<para>DESCRIPTION</para> -<informaltable><tgroup cols="1"><tbody><row> -<entry align="char"> -<para>WARNING: This is a very obscure legacy command, used only at stv0299 driver. Should not be used on newer drivers.</para> -<para>It provides a non-standard method for selecting Diseqc voltage on the frontend, for Dish Network legacy switches.</para> -<para>As support for this ioctl were added in 2004, this means that such dishes were already legacy in 2004.</para> -</entry> -</row></tbody></tgroup></informaltable> - -<para>SYNOPSIS</para> -<informaltable><tgroup cols="1"><tbody><row> -<entry align="char"> -<para>int ioctl(int fd, int request = - <link linkend="FE_DISHNETWORK_SEND_LEGACY_CMD">FE_DISHNETWORK_SEND_LEGACY_CMD</link>, unsigned long cmd);</para> -</entry> -</row></tbody></tgroup></informaltable> - -<para>PARAMETERS</para> -<informaltable><tgroup cols="2"><tbody><row> -<entry align="char"> - <para>unsigned long cmd</para> -</entry> -<entry align="char"> -<para> -sends the specified raw cmd to the dish via DISEqC. -</para> -</entry> - </row></tbody></tgroup></informaltable> - -&return-value-dvb; </section> +<section id="frontend_legacy_dvbv3_api"> +<title>DVB Frontend legacy API (a. k. a. DVBv3)</title> +<para>The usage of this API is deprecated, as it doesn't support all digital + TV standards, doesn't provide good statistics measurements and provides + incomplete information. This is kept only to support legacy applications.</para> + +&sub-frontend_legacy_api; </section> &sub-dvbproperty; diff --git a/Documentation/DocBook/media/dvb/frontend_legacy_api.xml b/Documentation/DocBook/media/dvb/frontend_legacy_api.xml new file mode 100644 index 000000000000..f4d300488d12 --- /dev/null +++ b/Documentation/DocBook/media/dvb/frontend_legacy_api.xml @@ -0,0 +1,603 @@ +<section id="frontend_legacy_types"> +<title>Frontend Legacy Data Types</title> + +<section id="fe-type-t"> +<title>Frontend type</title> + +<para>For historical reasons, frontend types are named by the type of modulation + used in transmission. The fontend types are given by fe_type_t type, defined as:</para> + +<table pgwide="1" frame="none" id="fe-type"> +<title>Frontend types</title> +<tgroup cols="3"> + &cs-def; + <thead> + <row> + <entry>fe_type</entry> + <entry>Description</entry> + <entry><link linkend="DTV-DELIVERY-SYSTEM">DTV_DELIVERY_SYSTEM</link> equivalent type</entry> + </row> + </thead> + <tbody valign="top"> + <row> + <entry id="FE_QPSK"><constant>FE_QPSK</constant></entry> + <entry>For DVB-S standard</entry> + <entry><constant>SYS_DVBS</constant></entry> + </row> + <row> + <entry id="FE_QAM"><constant>FE_QAM</constant></entry> + <entry>For DVB-C annex A standard</entry> + <entry><constant>SYS_DVBC_ANNEX_A</constant></entry> + </row> + <row> + <entry id="FE_OFDM"><constant>FE_OFDM</constant></entry> + <entry>For DVB-T standard</entry> + <entry><constant>SYS_DVBT</constant></entry> + </row> + <row> + <entry id="FE_ATSC"><constant>FE_ATSC</constant></entry> + <entry>For ATSC standard (terrestrial) or for DVB-C Annex B (cable) used in US.</entry> + <entry><constant>SYS_ATSC</constant> (terrestrial) or <constant>SYS_DVBC_ANNEX_B</constant> (cable)</entry> + </row> +</tbody></tgroup></table> + +<para>Newer formats like DVB-S2, ISDB-T, ISDB-S and DVB-T2 are not described at the above, as they're +supported via the new <link linkend="FE_GET_SET_PROPERTY">FE_GET_PROPERTY/FE_GET_SET_PROPERTY</link> ioctl's, using the <link linkend="DTV-DELIVERY-SYSTEM">DTV_DELIVERY_SYSTEM</link> parameter. +</para> + +<para>The usage of this field is deprecated, as it doesn't report all supported standards, and +will provide an incomplete information for frontends that support multiple delivery systems. +Please use <link linkend="DTV-ENUM-DELSYS">DTV_ENUM_DELSYS</link> instead.</para> +</section> + + +<section id="dvb-frontend-parameters"> +<title>frontend parameters</title> +<para>The kind of parameters passed to the frontend device for tuning depend on +the kind of hardware you are using.</para> +<para>The struct <constant>dvb_frontend_parameters</constant> uses an +union with specific per-system parameters. However, as newer delivery systems +required more data, the structure size weren't enough to fit, and just +extending its size would break the existing applications. So, those parameters +were replaced by the usage of <link linkend="FE_GET_SET_PROPERTY"> +<constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></link> ioctl's. The +new API is flexible enough to add new parameters to existing delivery systems, +and to add newer delivery systems.</para> +<para>So, newer applications should use <link linkend="FE_GET_SET_PROPERTY"> +<constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></link> instead, in +order to be able to support the newer System Delivery like DVB-S2, DVB-T2, +DVB-C2, ISDB, etc.</para> +<para>All kinds of parameters are combined as an union in the FrontendParameters structure: +<programlisting> +struct dvb_frontend_parameters { + uint32_t frequency; /⋆ (absolute) frequency in Hz for QAM/OFDM ⋆/ + /⋆ intermediate frequency in kHz for QPSK ⋆/ + fe_spectral_inversion_t inversion; + union { + struct dvb_qpsk_parameters qpsk; + struct dvb_qam_parameters qam; + struct dvb_ofdm_parameters ofdm; + struct dvb_vsb_parameters vsb; + } u; +}; +</programlisting></para> +<para>In the case of QPSK frontends the <constant>frequency</constant> field specifies the intermediate +frequency, i.e. the offset which is effectively added to the local oscillator frequency (LOF) of +the LNB. The intermediate frequency has to be specified in units of kHz. For QAM and +OFDM frontends the <constant>frequency</constant> specifies the absolute frequency and is given in Hz. +</para> + +<section id="dvb-qpsk-parameters"> +<title>QPSK parameters</title> +<para>For satellite QPSK frontends you have to use the <constant>dvb_qpsk_parameters</constant> structure:</para> +<programlisting> + struct dvb_qpsk_parameters { + uint32_t symbol_rate; /⋆ symbol rate in Symbols per second ⋆/ + fe_code_rate_t fec_inner; /⋆ forward error correction (see above) ⋆/ + }; +</programlisting> +</section> + +<section id="dvb-qam-parameters"> +<title>QAM parameters</title> +<para>for cable QAM frontend you use the <constant>dvb_qam_parameters</constant> structure:</para> +<programlisting> + struct dvb_qam_parameters { + uint32_t symbol_rate; /⋆ symbol rate in Symbols per second ⋆/ + fe_code_rate_t fec_inner; /⋆ forward error correction (see above) ⋆/ + fe_modulation_t modulation; /⋆ modulation type (see above) ⋆/ + }; +</programlisting> +</section> + +<section id="dvb-vsb-parameters"> +<title>VSB parameters</title> +<para>ATSC frontends are supported by the <constant>dvb_vsb_parameters</constant> structure:</para> +<programlisting> +struct dvb_vsb_parameters { + fe_modulation_t modulation; /⋆ modulation type (see above) ⋆/ +}; +</programlisting> +</section> + +<section id="dvb-ofdm-parameters"> +<title>OFDM parameters</title> +<para>DVB-T frontends are supported by the <constant>dvb_ofdm_parameters</constant> structure:</para> +<programlisting> + struct dvb_ofdm_parameters { + fe_bandwidth_t bandwidth; + fe_code_rate_t code_rate_HP; /⋆ high priority stream code rate ⋆/ + fe_code_rate_t code_rate_LP; /⋆ low priority stream code rate ⋆/ + fe_modulation_t constellation; /⋆ modulation type (see above) ⋆/ + fe_transmit_mode_t transmission_mode; + fe_guard_interval_t guard_interval; + fe_hierarchy_t hierarchy_information; + }; +</programlisting> +</section> +</section> + +<section id="dvb-frontend-event"> +<title>frontend events</title> + <programlisting> + struct dvb_frontend_event { + fe_status_t status; + struct dvb_frontend_parameters parameters; + }; +</programlisting> + </section> +</section> + +<section id="frontend_fcalls"> +<title>Frontend Legacy Function Calls</title> + +<para>Those functions are defined at DVB version 3. The support is kept in + the kernel due to compatibility issues only. Their usage is strongly + not recommended</para> + +<section id="FE_READ_BER"> +<title>FE_READ_BER</title> +<para>DESCRIPTION +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>This ioctl call returns the bit error rate for the signal currently + received/demodulated by the front-end. For this command, read-only access to + the device is sufficient.</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>SYNOPSIS +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>int ioctl(int fd, int request = <link linkend="FE_READ_BER">FE_READ_BER</link>, + uint32_t ⋆ber);</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>PARAMETERS +</para> +<informaltable><tgroup cols="2"><tbody><row><entry + align="char"> +<para>int fd</para> +</entry><entry + align="char"> +<para>File descriptor returned by a previous call to open().</para> +</entry> + </row><row><entry + align="char"> +<para>int request</para> +</entry><entry + align="char"> +<para>Equals <link linkend="FE_READ_BER">FE_READ_BER</link> for this command.</para> +</entry> + </row><row><entry + align="char"> +<para>uint32_t *ber</para> +</entry><entry + align="char"> +<para>The bit error rate is stored into *ber.</para> +</entry> + </row></tbody></tgroup></informaltable> + +&return-value-dvb; +</section> + +<section id="FE_READ_SNR"> +<title>FE_READ_SNR</title> + +<para>DESCRIPTION +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>This ioctl call returns the signal-to-noise ratio for the signal currently received + by the front-end. For this command, read-only access to the device is sufficient.</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>SYNOPSIS +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>int ioctl(int fd, int request = <link linkend="FE_READ_SNR">FE_READ_SNR</link>, uint16_t + ⋆snr);</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>PARAMETERS +</para> +<informaltable><tgroup cols="2"><tbody><row><entry + align="char"> +<para>int fd</para> +</entry><entry + align="char"> +<para>File descriptor returned by a previous call to open().</para> +</entry> + </row><row><entry + align="char"> +<para>int request</para> +</entry><entry + align="char"> +<para>Equals <link linkend="FE_READ_SNR">FE_READ_SNR</link> for this command.</para> +</entry> + </row><row><entry + align="char"> +<para>uint16_t *snr</para> +</entry><entry + align="char"> +<para>The signal-to-noise ratio is stored into *snr.</para> +</entry> + </row></tbody></tgroup></informaltable> + +&return-value-dvb; +</section> + +<section id="FE_READ_SIGNAL_STRENGTH"> +<title>FE_READ_SIGNAL_STRENGTH</title> +<para>DESCRIPTION +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>This ioctl call returns the signal strength value for the signal currently received + by the front-end. For this command, read-only access to the device is sufficient.</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>SYNOPSIS +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>int ioctl( int fd, int request = + <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link>, uint16_t ⋆strength);</para> +</entry> + </row></tbody></tgroup></informaltable> + +<para>PARAMETERS +</para> +<informaltable><tgroup cols="2"><tbody><row><entry + align="char"> +<para>int fd</para> +</entry><entry + align="char"> +<para>File descriptor returned by a previous call to open().</para> +</entry> + </row><row><entry + align="char"> +<para>int request</para> +</entry><entry + align="char"> +<para>Equals <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link> for this + command.</para> +</entry> + </row><row><entry + align="char"> +<para>uint16_t *strength</para> +</entry><entry + align="char"> +<para>The signal strength value is stored into *strength.</para> +</entry> + </row></tbody></tgroup></informaltable> + +&return-value-dvb; +</section> + +<section id="FE_READ_UNCORRECTED_BLOCKS"> +<title>FE_READ_UNCORRECTED_BLOCKS</title> +<para>DESCRIPTION +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>This ioctl call returns the number of uncorrected blocks detected by the device + driver during its lifetime. For meaningful measurements, the increment in block + count during a specific time interval should be calculated. For this command, + read-only access to the device is sufficient.</para> +</entry> + </row><row><entry + align="char"> +<para>Note that the counter will wrap to zero after its maximum count has been + reached.</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>SYNOPSIS +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>int ioctl( int fd, int request = + <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link>, uint32_t ⋆ublocks);</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>PARAMETERS +</para> +<informaltable><tgroup cols="2"><tbody><row><entry + align="char"> +<para>int fd</para> +</entry><entry + align="char"> +<para>File descriptor returned by a previous call to open().</para> +</entry> + </row><row><entry + align="char"> +<para>int request</para> +</entry><entry + align="char"> +<para>Equals <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link> for this + command.</para> +</entry> + </row><row><entry + align="char"> +<para>uint32_t *ublocks</para> +</entry><entry + align="char"> +<para>The total number of uncorrected blocks seen by the driver + so far.</para> +</entry> + </row></tbody></tgroup></informaltable> + +&return-value-dvb; +</section> + +<section id="FE_SET_FRONTEND"> +<title>FE_SET_FRONTEND</title> +<para>DESCRIPTION +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>This ioctl call starts a tuning operation using specified parameters. The result + of this call will be successful if the parameters were valid and the tuning could + be initiated. The result of the tuning operation in itself, however, will arrive + asynchronously as an event (see documentation for <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> and + FrontendEvent.) If a new <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> operation is initiated before + the previous one was completed, the previous operation will be aborted in favor + of the new one. This command requires read/write access to the device.</para> +</entry> + </row></tbody></tgroup></informaltable> + +<para>SYNOPSIS +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>int ioctl(int fd, int request = <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link>, + struct dvb_frontend_parameters ⋆p);</para> +</entry> + </row></tbody></tgroup></informaltable> +<para>PARAMETERS +</para> +<informaltable><tgroup cols="2"><tbody><row><entry + align="char"> +<para>int fd</para> +</entry><entry + align="char"> +<para>File descriptor returned by a previous call to open().</para> +</entry> + </row><row><entry + align="char"> +<para>int request</para> +</entry><entry + align="char"> +<para>Equals <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> for this command.</para> +</entry> + </row><row><entry + align="char"> +<para>struct + dvb_frontend_parameters + *p</para> +</entry><entry + align="char"> +<para>Points to parameters for tuning operation.</para> +</entry> + </row></tbody></tgroup></informaltable> + +&return-value-dvb; +<informaltable><tgroup cols="2"><tbody><row><entry + align="char"> +<para>EINVAL</para> +</entry><entry + align="char"> +<para>Maximum supported symbol rate reached.</para> +</entry> +</row></tbody></tgroup></informaltable> +</section> + +<section id="FE_GET_FRONTEND"> +<title>FE_GET_FRONTEND</title> +<para>DESCRIPTION +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>This ioctl call queries the currently effective frontend parameters. For this + command, read-only access to the device is sufficient.</para> +</entry> + </row></tbody></tgroup></informaltable> + +<para>SYNOPSIS +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>int ioctl(int fd, int request = <link linkend="FE_GET_FRONTEND">FE_GET_FRONTEND</link>, + struct dvb_frontend_parameters ⋆p);</para> +</entry> + </row></tbody></tgroup></informaltable> + +<para>PARAMETERS +</para> +<informaltable><tgroup cols="2"><tbody><row><entry + align="char"> +<para>int fd</para> +</entry><entry + align="char"> +<para>File descriptor returned by a previous call to open().</para> +</entry> + </row><row><entry + align="char"> +<para>int request</para> +</entry><entry + align="char"> +<para>Equals <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> for this command.</para> +</entry> + </row><row><entry + align="char"> +<para>struct + dvb_frontend_parameters + *p</para> +</entry><entry + align="char"> +<para>Points to parameters for tuning operation.</para> +</entry> + </row></tbody></tgroup></informaltable> + +&return-value-dvb; +<informaltable><tgroup cols="2"><tbody><row><entry + align="char"> +<para>EINVAL</para> +</entry><entry + align="char"> +<para>Maximum supported symbol rate reached.</para> +</entry> + </row></tbody></tgroup></informaltable> + +</section> + +<section id="FE_GET_EVENT"> +<title>FE_GET_EVENT</title> +<para>DESCRIPTION +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>This ioctl call returns a frontend event if available. If an event is not + available, the behavior depends on whether the device is in blocking or + non-blocking mode. In the latter case, the call fails immediately with errno + set to EWOULDBLOCK. In the former case, the call blocks until an event + becomes available.</para> +</entry> + </row><row><entry + align="char"> +<para>The standard Linux poll() and/or select() system calls can be used with the + device file descriptor to watch for new events. For select(), the file descriptor + should be included in the exceptfds argument, and for poll(), POLLPRI should + be specified as the wake-up condition. Since the event queue allocated is + rather small (room for 8 events), the queue must be serviced regularly to avoid + overflow. If an overflow happens, the oldest event is discarded from the queue, + and an error (EOVERFLOW) occurs the next time the queue is read. After + reporting the error condition in this fashion, subsequent + <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> + calls will return events from the queue as usual.</para> +</entry> + </row><row><entry + align="char"> +<para>For the sake of implementation simplicity, this command requires read/write + access to the device.</para> +</entry> + </row></tbody></tgroup></informaltable> + +<para>SYNOPSIS +</para> +<informaltable><tgroup cols="1"><tbody><row><entry + align="char"> +<para>int ioctl(int fd, int request = QPSK_GET_EVENT, + struct dvb_frontend_event ⋆ev);</para> +</entry> + </row></tbody></tgroup></informaltable> + +<para>PARAMETERS +</para> +<informaltable><tgroup cols="2"><tbody><row><entry + align="char"> +<para>int fd</para> +</entry><entry + align="char"> +<para>File descriptor returned by a previous call to open().</para> +</entry> + </row><row><entry + align="char"> +<para>int request</para> +</entry><entry + align="char"> +<para>Equals <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> for this command.</para> +</entry> + </row><row><entry + align="char"> +<para>struct + dvb_frontend_event + *ev</para> +</entry><entry + align="char"> +<para>Points to the location where the event,</para> +</entry> + </row><row><entry + align="char"> +</entry><entry + align="char"> +<para>if any, is to be stored.</para> +</entry> + </row></tbody></tgroup></informaltable> + +&return-value-dvb; +<informaltable><tgroup cols="2"><tbody><row><entry + align="char"> +<para>EWOULDBLOCK</para> +</entry><entry + align="char"> +<para>There is no event pending, and the device is in + non-blocking mode.</para> +</entry> + </row><row><entry + align="char"> +<para>EOVERFLOW</para> +</entry><entry + align="char"> +<para>Overflow in event queue - one or more events were lost.</para> +</entry> +</row></tbody></tgroup></informaltable> +</section> + +<section id="FE_DISHNETWORK_SEND_LEGACY_CMD"> + <title>FE_DISHNETWORK_SEND_LEGACY_CMD</title> +<para>DESCRIPTION</para> +<informaltable><tgroup cols="1"><tbody><row> +<entry align="char"> +<para>WARNING: This is a very obscure legacy command, used only at stv0299 driver. Should not be used on newer drivers.</para> +<para>It provides a non-standard method for selecting Diseqc voltage on the frontend, for Dish Network legacy switches.</para> +<para>As support for this ioctl were added in 2004, this means that such dishes were already legacy in 2004.</para> +</entry> +</row></tbody></tgroup></informaltable> + +<para>SYNOPSIS</para> +<informaltable><tgroup cols="1"><tbody><row> +<entry align="char"> +<para>int ioctl(int fd, int request = + <link linkend="FE_DISHNETWORK_SEND_LEGACY_CMD">FE_DISHNETWORK_SEND_LEGACY_CMD</link>, unsigned long cmd);</para> +</entry> +</row></tbody></tgroup></informaltable> + +<para>PARAMETERS</para> +<informaltable><tgroup cols="2"><tbody><row> +<entry align="char"> + <para>unsigned long cmd</para> +</entry> +<entry align="char"> +<para> +sends the specified raw cmd to the dish via DISEqC. +</para> +</entry> + </row></tbody></tgroup></informaltable> + +&return-value-dvb; +</section> + +</section> -- 2.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
