Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

On 15-05-26 07:19 AM, Felipe Balbi wrote:
HI,

On Mon, May 25, 2015 at 02:19:58PM -0700, Arun Ramamurthy wrote:


On 15-05-14 05:52 PM, Felipe Balbi wrote:
Hi,

On Wed, Apr 22, 2015 at 04:04:10PM -0700, Arun Ramamurthy wrote:
Most of the phy providers use "select" to enable GENERIC_PHY. Since select
is only recommended when the config is not visible, GENERIC_PHY is changed
an invisible option. To maintain consistency, all phy providers are changed
to "select" GENERIC_PHY and all non-phy drivers use "depends on" when the
phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic
dependency, so it is left as "select".

Signed-off-by: Arun Ramamurthy <arun.ramamurthy@xxxxxxxxxxxx>
---
  drivers/ata/Kconfig                       | 1 -
  drivers/media/platform/exynos4-is/Kconfig | 2 +-
  drivers/phy/Kconfig                       | 4 ++--
  drivers/usb/host/Kconfig                  | 4 ++--
  drivers/video/fbdev/exynos/Kconfig        | 2 +-
  5 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 5f60155..6d2e881 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -301,7 +301,6 @@ config SATA_MV
  	tristate "Marvell SATA support"
  	depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
  		   ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
-	select GENERIC_PHY
  	help
  	  This option enables support for the Marvell Serial ATA family.
  	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
index b7b2e47..b6f3eaa 100644
--- a/drivers/media/platform/exynos4-is/Kconfig
+++ b/drivers/media/platform/exynos4-is/Kconfig
@@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC
  config VIDEO_S5P_MIPI_CSIS
  	tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver"
  	depends on REGULATOR
-	select GENERIC_PHY
+	depends on GENERIC_PHY
  	help
  	  This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2
  	  receiver (MIPI-CSIS) devices.
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 2962de2..edecdb1 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -5,7 +5,7 @@
  menu "PHY Subsystem"

  config GENERIC_PHY
-	bool "PHY Core"
+	bool
  	help
  	  Generic PHY support.

@@ -72,7 +72,7 @@ config PHY_MIPHY365X
  config PHY_RCAR_GEN2
  	tristate "Renesas R-Car generation 2 USB PHY driver"
  	depends on ARCH_SHMOBILE
-	depends on GENERIC_PHY
+	select GENERIC_PHY

so some you changed from depends to select...

  	help
  	  Support for USB PHY found on Renesas R-Car generation 2 SoCs.

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 5ad60e4..e2197e2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR
  config USB_EHCI_HCD_STI
  	tristate "Support for ST STiHxxx on-chip EHCI USB controller"
  	depends on ARCH_STI && OF
-	select GENERIC_PHY
+	depends on GENERIC_PHY

while others you changed from select to depends.

NAK.

Felipe, I dont understand your concern, could you please explain it more
detail?  The logic behind the changes is that in cases where there was an
explicit dependency, I changed it to "depends on" and in other cases I
changed it to "selects". Thanks

Since GENERIC_PHY is visible from Kconfig, it would be much nicer to
avoid select altogether.

Felipe, after discussion with the maintainers, I have made GENERIC_PHY an invisible option as part of this change. Thanks
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux