Re: [PATCH v3 1/7] rc: rc-ir-raw: Add scancode encoder callback

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 20, 2015 at 07:46:21PM +0300, Antti Seppälä wrote:
>On 19 May 2015 at 23:38, David Härdeman <david@xxxxxxxxxxx> wrote:
>> On Tue, Mar 31, 2015 at 08:48:06PM +0300, Antti Seppälä wrote:
>>>From: James Hogan <james@xxxxxxxxxxxxx>
>>>
>>>Add a callback to raw ir handlers for encoding and modulating a scancode
>>>to a set of raw events. This could be used for transmit, or for
>>>converting a wakeup scancode filter to a form that is more suitable for
>>>raw hardware wake up filters.
>>>
>>>Signed-off-by: James Hogan <james@xxxxxxxxxxxxx>
>>>Signed-off-by: Antti Seppälä <a.seppala@xxxxxxxxx>
>>>Cc: David Härdeman <david@xxxxxxxxxxx>
>>>---
>>>
>>>Notes:
>>>    Changes in v3:
>>>     - Ported to apply against latest media-tree
>>>
>>>    Changes in v2:
>>>     - Alter encode API to return -ENOBUFS when there isn't enough buffer
>>>       space. When this occurs all buffer contents must have been written
>>>       with the partial encoding of the scancode. This is to allow drivers
>>>       such as nuvoton-cir to provide a shorter buffer and still get a
>>>       useful partial encoding for the wakeup pattern.
>>>
>>> drivers/media/rc/rc-core-priv.h |  2 ++
>>> drivers/media/rc/rc-ir-raw.c    | 37 +++++++++++++++++++++++++++++++++++++
>>> include/media/rc-core.h         |  3 +++
>>> 3 files changed, 42 insertions(+)
>>>
>>>diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
>>>index b68d4f76..122c25f 100644
>>>--- a/drivers/media/rc/rc-core-priv.h
>>>+++ b/drivers/media/rc/rc-core-priv.h
>>>@@ -25,6 +25,8 @@ struct ir_raw_handler {
>>>
>>>       u64 protocols; /* which are handled by this handler */
>>>       int (*decode)(struct rc_dev *dev, struct ir_raw_event event);
>>>+      int (*encode)(u64 protocols, const struct rc_scancode_filter *scancode,
>>>+                    struct ir_raw_event *events, unsigned int max);
>>>
>>>       /* These two should only be used by the lirc decoder */
>>>       int (*raw_register)(struct rc_dev *dev);
>>>diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c
>>>index b732ac6..dd47fe5 100644
>>>--- a/drivers/media/rc/rc-ir-raw.c
>>>+++ b/drivers/media/rc/rc-ir-raw.c
>>>@@ -246,6 +246,43 @@ static int change_protocol(struct rc_dev *dev, u64 *rc_type)
>>>       return 0;
>>> }
>>>
>>>+/**
>>>+ * ir_raw_encode_scancode() - Encode a scancode as raw events
>>>+ *
>>>+ * @protocols:                permitted protocols
>>>+ * @scancode:         scancode filter describing a single scancode
>>>+ * @events:           array of raw events to write into
>>>+ * @max:              max number of raw events
>>>+ *
>>>+ * Attempts to encode the scancode as raw events.
>>>+ *
>>>+ * Returns:   The number of events written.
>>>+ *            -ENOBUFS if there isn't enough space in the array to fit the
>>>+ *            encoding. In this case all @max events will have been written.
>>>+ *            -EINVAL if the scancode is ambiguous or invalid, or if no
>>>+ *            compatible encoder was found.
>>>+ */
>>>+int ir_raw_encode_scancode(u64 protocols,
>>
>> Why a bitmask of protocols and not a single protocol enum? What's the
>> use case for encoding a given scancode according to one out of a number
>> of protocols (and not even knowing which one)??
>>
>
>I think bitmask was used simply for consistency reasons. Most of the
>rc-core handles protocols in a bitmask (u64 protocols or some variant
>of it).

Yes, all the parts where multiple protocols make sense use a bitmap of
protocols. If there's any part which uses a bitmap where only one
protocol makes sense that'd be a bug...

>Especially in the decoders the dev->enabled_protocols is used
>to mean "decode any of these protocols but I don't care which one" and
>the encoders were written to follow that logic.

The fact that you might want to be able to receive and decode more than
one protocol has no bearing on encoding when you're supposed to know
what it is you want to encode....

>From ir driver point of view it was also kind of nice to use the u64
>enabled_wakeup_protocols from struct rc_dev which already exists and
>is manipulated with the same sysfs code as the enabled_protocols
>bitmask.

But it makes no sense? "here's a scancode...I have no idea what it means
since only knowing the protocol allows you to make any sense of the
scancode...but please encode it to something...anything...."

-- 
David Härdeman
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux