Instead of using printk(), use pr_foo() macros.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
diff --git a/drivers/media/pci/saa7134/saa7134-i2c.c b/drivers/media/pci/saa7134/saa7134-i2c.c
index ef3c33e3757d..d04fbdb49158 100644
--- a/drivers/media/pci/saa7134/saa7134-i2c.c
+++ b/drivers/media/pci/saa7134/saa7134-i2c.c
@@ -386,7 +386,7 @@ static char *i2c_devs[128] = {
[ 0x5a >> 1 ] = "remote control",
};
-static void do_i2c_scan(char *name, struct i2c_client *c)
+static void do_i2c_scan(struct i2c_client *c)
{
unsigned char buf;
int i,rc;
@@ -396,8 +396,8 @@ static void do_i2c_scan(char *name, struct i2c_client *c)
rc = i2c_master_recv(c,&buf,0);
if (rc < 0)
continue;
- printk("%s: i2c scan: found device @ 0x%x [%s]\n",
- name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
+ pr_info("i2c scan: found device @ 0x%x [%s]\n",
+ i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
}
}
@@ -415,7 +415,7 @@ int saa7134_i2c_register(struct saa7134_dev *dev)
saa7134_i2c_eeprom(dev,dev->eedata,sizeof(dev->eedata));
if (i2c_scan)
- do_i2c_scan(dev->name,&dev->i2c_client);
+ do_i2c_scan(&dev->i2c_client);
/* Instantiate the IR receiver device, if present */
saa7134_probe_i2c_ir(dev);
diff --git a/drivers/media/pci/saa7134/saa7134-input.c b/drivers/media/pci/saa7134/saa7134-input.c
index 89f5fcf12722..c6036557b468 100644
--- a/drivers/media/pci/saa7134/saa7134-input.c
+++ b/drivers/media/pci/saa7134/saa7134-input.c
@@ -831,8 +831,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
break;
}
if (NULL == ir_codes) {
- printk("%s: Oops: IR config error [card=%d]\n",
- dev->name, dev->board);
+ pr_err("Oops: IR config error [card=%d]\n", dev->board);
return -ENODEV;
}
diff --git a/drivers/media/pci/saa7134/saa7134-tvaudio.c b/drivers/media/pci/saa7134/saa7134-tvaudio.c
index 360f447bd74d..6320b64d3528 100644
--- a/drivers/media/pci/saa7134/saa7134-tvaudio.c
+++ b/drivers/media/pci/saa7134/saa7134-tvaudio.c
@@ -674,12 +674,11 @@ static inline int saa_dsp_wait_bit(struct saa7134_dev *dev, int bit)
}
while (0 == (state & bit)) {
if (unlikely(0 == count)) {
- printk("%s: dsp access wait timeout [bit=%s]\n",
- dev->name,
- (bit & SAA7135_DSP_RWSTATE_WRR) ? "WRR" :
- (bit & SAA7135_DSP_RWSTATE_RDB) ? "RDB" :
- (bit & SAA7135_DSP_RWSTATE_IDA) ? "IDA" :
- "???");
+ pr_err("dsp access wait timeout [bit=%s]\n",
+ (bit & SAA7135_DSP_RWSTATE_WRR) ? "WRR" :
+ (bit & SAA7135_DSP_RWSTATE_RDB) ? "RDB" :
+ (bit & SAA7135_DSP_RWSTATE_IDA) ? "IDA" :
+ "???");
return -EIO;
}
saa_wait(DSP_DELAY);
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
