From: Mats Randgaard <matrandg@xxxxxxxxx> Hi, I have finally finished the second RFC for this driver. Changes since RFC01: - Improved code based on feedback from Hans and Philipp. For the CSI parameters have I only written a set of values that can serve as a starting point, since calculation of the parameters in the driver will require more work. - Fixed problem with some sources that are transmitting an unstable signal while they are in standby. - Fixed problem where audio was not received from some sources after coming out of standby, reconnecting cable or stopping/starting the stream. - When the stream is enabled a proper lane transition is triggered on the CSI interface to ensure that the CSI receiver is ready. - All CE and IT formats are detected as RGB full quantization range in DVI mode. Philipp, I have not had time to look at your patches, so maybe you can rebase them on this version of the driver? Mats Randgaard (1): Driver for Toshiba TC358743 CSI-2 to HDMI bridge MAINTAINERS | 6 + drivers/media/i2c/Kconfig | 9 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/tc358743.c | 1838 ++++++++++++++++++++++++++++++++++++ drivers/media/i2c/tc358743_regs.h | 680 +++++++++++++ include/media/tc358743.h | 92 ++ include/uapi/linux/v4l2-controls.h | 4 + 7 files changed, 2630 insertions(+) create mode 100644 drivers/media/i2c/tc358743.c create mode 100644 drivers/media/i2c/tc358743_regs.h create mode 100644 include/media/tc358743.h -- 2.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
