On Wed, 2015-04-15 at 17:58 -0700, Andy Lutomirski wrote: > On Wed, Apr 15, 2015 at 4:59 PM, Andy Walls <awalls@xxxxxxxxxxxxxxxx> wrote: > > On Wed, 2015-04-15 at 16:42 -0700, Andy Lutomirski wrote: > >> On Wed, Apr 15, 2015 at 3:38 PM, Andy Walls <awalls@xxxxxxxxxxxxxxxx> wrote: > > > >> > > >> > >> IMO the right solution would be to avoid ioremapping the whole bar at > >> startup. Instead ioremap pieces once the driver learns what they are. > >> This wouldn't have any of these problems -- you'd ioremap() register > >> regions and you'd ioremap_wc() the framebuffer once you find it. If > >> there are regions of unknown purpose, just don't map them all. > >> > >> Would this be feasible? > > > > Feasible? Maybe. > > > > Worth the time and effort for end-of-life, convential PCI hardware so I > > can have an optimally performing X display on a Standard Def Analog TV > > screen? Nope. I don't have that level of nostalgia. > > > > The point is actually to let us unexport or delete mtrr_add. Understood. > We can > either severely regress performance on ivtv on PAT-capable hardware if > we naively switch it to arch_phys_wc_add or we can do something else. > The something else remains to be determined. Maybe ioremap the decoder register area as UC, and ioremap the rest of the decoder region to WC. (Does that suck up too many PAT resources?) Then add PCI reads following any sort of singleton PCI writes in the WC region. I assume PCI rules about write postings before reads still apply when WC is set. > > > > We sort of know where some things are in the MMIO space due to > > experimentation and past efforts examining the firmware binary. > > > > Documentation/video4linux/cx2341x/fw-*.txt documents some things. The > > driver code actually codifies a little bit more knowledge. > > > > The driver code for doing transfers between host and card is complex and > > fragile with some streams that use DMA, other streams that use PIO, > > digging VBI data straight out of card memory, and scatter-gather being > > broken on newer firmwares. Playing around with ioremapping will be hard > > to get right and likely cause something in the code to break for the > > primary use case of the ivtv supported cards. > > Ick. Yeah. > If the only thing that really wants WC is the esoteric framebuffer > thing, That appears to be it. > could we just switch to arch_phys_wc_add and assume that no one > will care about the regression on new CPUs with ivtv cards? That's on the table in my mind. Not sure if it is the friendliest thing to do to users. Quite honestly though, modern graphics cards have much better ouput resolution and performance. Anyone with a modern system really should be using one. (i.e. MythTV gave up on support for PVR-350 output for video playback years ago in May 2010.) BTW, my 2005 system with multiple conventional PCI slots in it shows a 'pat' flag in /proc/cpuinfo. (AMD Athlon(tm) 64 X2 Dual Core Processor 4200+) I didn't know it was considered "new". :) Regards, Andy -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
