Add support for V4L2 Flash sub-device to the aat1290 LED Flash class
driver. The support allows for V4L2 Flash sub-device to take the control
of the LED Flash class device.
Signed-off-by: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Cc: Bryan Wu <cooloney@xxxxxxxxx>
Cc: Richard Purdie <rpurdie@xxxxxxxxx>
Cc: Sakari Ailus <sakari.ailus@xxxxxx>
---
drivers/leds/Kconfig | 1 +
drivers/leds/leds-aat1290.c | 137 +++++++++++++++++++++++++++++++++++++++++--
2 files changed, 132 insertions(+), 6 deletions(-)
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index fe2ef1e..ae77316 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -47,6 +47,7 @@ config LEDS_AAT1290
depends on LEDS_CLASS_FLASH
depends on GPIOLIB
depends on OF
+ depends on PINCTRL
help
This option enables support for the LEDs on the AAT1290.
diff --git a/drivers/leds/leds-aat1290.c b/drivers/leds/leds-aat1290.c
index 03e5b96..7415d5ec 100644
--- a/drivers/leds/leds-aat1290.c
+++ b/drivers/leds/leds-aat1290.c
@@ -17,9 +17,11 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
+#include <media/v4l2-flash.h>
#define AAT1290_MOVIE_MODE_CURRENT_ADDR 17
#define AAT1290_MAX_MM_CURR_PERCENT_0 16
@@ -52,6 +54,8 @@ struct aat1290_led_config_data {
u32 max_flash_current;
/* maximum flash timeout */
u32 max_flash_tm;
+ /* external strobe capability */
+ bool has_external_strobe;
/* max LED brightness level */
enum led_brightness max_brightness;
};
@@ -64,6 +68,8 @@ struct aat1290_led {
/* corresponding LED Flash class device */
struct led_classdev_flash fled_cdev;
+ /* V4L2 Flash device */
+ struct v4l2_flash *v4l2_flash;
/* FLEN pin */
struct gpio_desc *gpio_fl_en;
@@ -230,11 +236,15 @@ static int aat1290_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
}
static int aat1290_led_parse_dt(struct aat1290_led *led,
- struct aat1290_led_config_data *cfg)
+ struct aat1290_led_config_data *cfg,
+ struct device_node **sub_node)
{
struct led_classdev *led_cdev = &led->fled_cdev.led_cdev;
struct device *dev = &led->pdev->dev;
struct device_node *child_node;
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+ struct pinctrl *pinctrl;
+#endif
int ret = 0;
led->gpio_fl_en = devm_gpiod_get(dev, "flen");
@@ -251,6 +261,17 @@ static int aat1290_led_parse_dt(struct aat1290_led *led,
return ret;
}
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+ pinctrl = devm_pinctrl_get_select_default(&led->pdev->dev);
+ if (IS_ERR(pinctrl)) {
+ cfg->has_external_strobe = false;
+ dev_info(dev,
+ "No support for external strobe detected.\n");
+ } else {
+ cfg->has_external_strobe = true;
+ }
+#endif
+
child_node = of_get_next_available_child(dev->of_node, NULL);
if (!child_node) {
dev_err(dev, "No DT child node found for connected LED.\n");
@@ -288,6 +309,8 @@ static int aat1290_led_parse_dt(struct aat1290_led *led,
of_node_put(child_node);
+ *sub_node = child_node;
+
return ret;
}
@@ -316,7 +339,8 @@ int init_mm_current_scale(struct aat1290_led *led,
int i, max_mm_current =
AAT1290_MAX_MM_CURRENT(cfg->max_flash_current);
- led->mm_current_scale = kzalloc(sizeof(max_mm_current_percent),
+ led->mm_current_scale = devm_kzalloc(&led->pdev->dev,
+ sizeof(max_mm_current_percent),
GFP_KERNEL);
if (!led->mm_current_scale)
return -ENOMEM;
@@ -329,11 +353,12 @@ int init_mm_current_scale(struct aat1290_led *led,
}
static int aat1290_led_get_configuration(struct aat1290_led *led,
- struct aat1290_led_config_data *cfg)
+ struct aat1290_led_config_data *cfg,
+ struct device_node **sub_node)
{
int ret;
- ret = aat1290_led_parse_dt(led, cfg);
+ ret = aat1290_led_parse_dt(led, cfg, sub_node);
if (ret < 0)
return ret;
/*
@@ -346,7 +371,10 @@ static int aat1290_led_get_configuration(struct aat1290_led *led,
aat1290_led_validate_mm_current(led, cfg);
- kfree(led->mm_current_scale);
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+#else
+ devm_kfree(&led->pdev->dev, led->mm_current_scale);
+#endif
return 0;
}
@@ -365,6 +393,83 @@ static void aat1290_init_flash_timeout(struct aat1290_led *led,
setting->val = setting->max;
}
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+enum led_brightness aat1290_intensity_to_brightness(
+ struct v4l2_flash *v4l2_flash,
+ s32 intensity)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+ int i;
+
+ for (i = AAT1290_MM_CURRENT_SCALE_SIZE - 1; i >= 0; --i)
+ if (intensity >= led->mm_current_scale[i])
+ return i + 1;
+
+ return 1;
+}
+
+s32 aat1290_brightness_to_intensity(struct v4l2_flash *v4l2_flash,
+ enum led_brightness brightness)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+
+ return led->mm_current_scale[brightness - 1];
+}
+
+static int aat1290_led_external_strobe_set(struct v4l2_flash *v4l2_flash,
+ bool enable)
+{
+ struct aat1290_led *led = fled_cdev_to_led(v4l2_flash->fled_cdev);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct pinctrl *pinctrl;
+
+ gpiod_direction_output(led->gpio_fl_en, 0);
+ gpiod_direction_output(led->gpio_en_set, 0);
+
+ led->movie_mode = false;
+ led_cdev->brightness = 0;
+
+ pinctrl = devm_pinctrl_get_select(&led->pdev->dev,
+ enable ? "isp" : "host");
+ if (IS_ERR(pinctrl)) {
+ dev_warn(&led->pdev->dev, "Unable to switch strobe source.\n");
+ return PTR_ERR(pinctrl);
+ }
+
+ return 0;
+}
+
+static void aat1290_init_v4l2_flash_config(struct aat1290_led *led,
+ struct aat1290_led_config_data *led_cfg,
+ struct v4l2_flash_config *v4l2_sd_cfg)
+{
+ struct led_classdev *led_cdev = &led->fled_cdev.led_cdev;
+ struct led_flash_setting *s;
+
+ strlcpy(v4l2_sd_cfg->dev_name, led_cdev->name,
+ sizeof(v4l2_sd_cfg->dev_name));
+
+ s = &v4l2_sd_cfg->intensity;
+ s->min = led->mm_current_scale[0];
+ s->max = led_cfg->max_mm_current;
+ s->step = 1;
+ s->val = s->max;
+
+ v4l2_sd_cfg->has_external_strobe = led_cfg->has_external_strobe;
+}
+
+static const struct v4l2_flash_ops v4l2_flash_ops = {
+ .external_strobe_set = aat1290_led_external_strobe_set,
+ .intensity_to_led_brightness = aat1290_intensity_to_brightness,
+ .led_brightness_to_intensity = aat1290_brightness_to_intensity,
+};
+#else
+#define aat1290_init_v4l2_flash_config(led, led_cfg, v4l2_sd_cfg)
+#endif
+
static const struct led_flash_ops flash_ops = {
.strobe_set = aat1290_led_flash_strobe_set,
.timeout_set = aat1290_led_flash_timeout_set,
@@ -373,10 +478,14 @@ static const struct led_flash_ops flash_ops = {
static int aat1290_led_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct device_node *sub_node = NULL;
struct aat1290_led *led;
struct led_classdev *led_cdev;
struct led_classdev_flash *fled_cdev;
struct aat1290_led_config_data led_cfg = {};
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+ struct v4l2_flash_config v4l2_sd_cfg = {};
+#endif
int ret;
led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
@@ -390,7 +499,7 @@ static int aat1290_led_probe(struct platform_device *pdev)
fled_cdev->ops = &flash_ops;
led_cdev = &fled_cdev->led_cdev;
- ret = aat1290_led_get_configuration(led, &led_cfg);
+ ret = aat1290_led_get_configuration(led, &led_cfg, &sub_node);
if (ret < 0)
return ret;
@@ -410,8 +519,23 @@ static int aat1290_led_probe(struct platform_device *pdev)
if (ret < 0)
goto err_flash_register;
+ aat1290_init_v4l2_flash_config(led, &led_cfg, &v4l2_sd_cfg);
+
+ led_cdev->dev->of_node = sub_node;
+
+ /* Create V4L2 Flash subdev. */
+ led->v4l2_flash = v4l2_flash_init(fled_cdev,
+ &v4l2_flash_ops,
+ &v4l2_sd_cfg);
+ if (IS_ERR(led->v4l2_flash)) {
+ ret = PTR_ERR(led->v4l2_flash);
+ goto error_v4l2_flash_init;
+ }
+
return 0;
+error_v4l2_flash_init:
+ led_classdev_flash_unregister(fled_cdev);
err_flash_register:
mutex_destroy(&led->lock);
@@ -422,6 +546,7 @@ static int aat1290_led_remove(struct platform_device *pdev)
{
struct aat1290_led *led = platform_get_drvdata(pdev);
+ v4l2_flash_release(led->v4l2_flash);
led_classdev_flash_unregister(&led->fled_cdev);
cancel_work_sync(&led->work_brightness_set);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
