Hi, Laurent On 4/12/2015 9:08 PM, Laurent Pinchart wrote:
Hi Josh, Thank you for the patch. On Thursday 09 April 2015 17:01:48 Josh Wu wrote:The master clock should handled by sensor itself. Signed-off-by: Josh Wu <josh.wu@xxxxxxxxx> --- Changes in v2: - totally remove clock_start()/clock_stop() as they are optional. drivers/media/platform/soc_camera/atmel-isi.c | 45 ------------------------ 1 file changed, 45 deletions(-) diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index 2b05f89..7bba7d9 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -83,8 +83,6 @@ struct atmel_isi { struct completion complete; /* ISI peripherial clock */ struct clk *pclk; - /* ISI_MCK, feed to camera sensor to generate pixel clock */ - struct clk *mck; unsigned int irq; struct isi_platform_data pdata; @@ -727,31 +725,6 @@ static void isi_camera_remove_device(struct soc_camera_device *icd) icd->devnum); } -/* Called with .host_lock held */ -static int isi_camera_clock_start(struct soc_camera_host *ici) -{ - struct atmel_isi *isi = ici->priv; - int ret; - - if (!IS_ERR(isi->mck)) { - ret = clk_prepare_enable(isi->mck); - if (ret) { - return ret; - } - } - - return 0; -} - -/* Called with .host_lock held */ -static void isi_camera_clock_stop(struct soc_camera_host *ici) -{ - struct atmel_isi *isi = ici->priv; - - if (!IS_ERR(isi->mck)) - clk_disable_unprepare(isi->mck); -} - static unsigned int isi_camera_poll(struct file *file, poll_table *pt) { struct soc_camera_device *icd = file->private_data; @@ -865,8 +838,6 @@ static struct soc_camera_host_ops isi_soc_camera_host_ops = { .owner = THIS_MODULE, .add = isi_camera_add_device, .remove = isi_camera_remove_device, - .clock_start = isi_camera_clock_start, - .clock_stop = isi_camera_clock_stop, .set_fmt = isi_camera_set_fmt, .try_fmt = isi_camera_try_fmt, .get_formats = isi_camera_get_formats, @@ -904,7 +875,6 @@ static int atmel_isi_probe_dt(struct atmel_isi *isi, /* Default settings for ISI */ isi->pdata.full_mode = 1; - isi->pdata.mck_hz = ISI_DEFAULT_MCLK_FREQ;You can also remove the #define ISI_DEFAULT_MCLK_FREQ at the beginning of this file.
I'll remove the useless definition.
With this fixed, Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Thanks. Best Regards, Josh Wu
isi->pdata.frate = ISI_CFG1_FRATE_CAPTURE_ALL; np = of_graph_get_next_endpoint(np, NULL); @@ -980,21 +950,6 @@ static int atmel_isi_probe(struct platform_device *pdev) INIT_LIST_HEAD(&isi->video_buffer_list); INIT_LIST_HEAD(&isi->dma_desc_head); - /* ISI_MCK is the sensor master clock. It should be handled by the - * sensor driver directly, as the ISI has no use for that clock. Make - * the clock optional here while platforms transition to the correct - * model. - */ - isi->mck = devm_clk_get(dev, "isi_mck"); - if (!IS_ERR(isi->mck)) { - /* Set ISI_MCK's frequency, it should be faster than pixel - * clock. - */ - ret = clk_set_rate(isi->mck, isi->pdata.mck_hz); - if (ret < 0) - return ret; - } - isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev, sizeof(struct fbd) * MAX_BUFFER_NUM, &isi->fb_descriptors_phys,
-- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
