Tha ARM randconfig builds came up with another rare build
failure for the dib3000mc driver, when dibusb is built-in
and dib3000mc is a loadable module:
ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/usb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined!
ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/usb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined!
Apparently this used to be a valid configuration (build-time,
not run-time), but broke as part of a cleanup.
I tried reverting the cleanup, but saw that the code was still
wrong then. This tries to fix the code properly, by moving the
problematic functions into a new file that now is built as a
loadable module or built-in, whichever is correct for a particular
configuration. It fixes the regression as well as the run-time
problem that already existed before.
I have also checked the two other files that were changed in
the original cleanup, and found them to be correct in either
version, so I do not touch that part.
As this is a rather obscure bug, there is no need for backports.
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
Fixes: 028c70ff42783 ("[media] dvb-usb/dvb-usb-v2: use IS_ENABLED")
---
drivers/media/usb/dvb-usb/Kconfig | 20 +++-
drivers/media/usb/dvb-usb/Makefile | 3 +
drivers/media/usb/dvb-usb/dibusb-common.c | 158 -------------------------
drivers/media/usb/dvb-usb/dibusb-mc-common.c | 168 +++++++++++++++++++++++++++
4 files changed, 186 insertions(+), 163 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/Kconfig b/drivers/media/usb/dvb-usb/Kconfig
index 128eee61570d..8b662b3f8ac1 100644
--- a/drivers/media/usb/dvb-usb/Kconfig
+++ b/drivers/media/usb/dvb-usb/Kconfig
@@ -20,10 +20,20 @@ config DVB_USB_DEBUG
Say Y if you want to enable debugging. See modinfo dvb-usb (and the
appropriate drivers) for debug levels.
+config DVB_USB_DIB3000MC
+ tristate
+ depends on DVB_USB
+ select DVB_DIB3000MC
+ help
+ This is a module with helper functions for accessing the
+ DIB3000MC from USB DVB devices. It must be a separate module
+ in case DVB_USB is built-in and DVB_DIB3000MC is a module,
+ and gets selected automatically when needed.
+
config DVB_USB_A800
tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
depends on DVB_USB
- select DVB_DIB3000MC
+ select DVB_USB_DIB3000MC
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
help
@@ -54,7 +64,7 @@ config DVB_USB_DIBUSB_MB_FAULTY
config DVB_USB_DIBUSB_MC
tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
depends on DVB_USB
- select DVB_DIB3000MC
+ select DVB_USB_DIB3000MC
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
help
Support for USB2.0 DVB-T receivers based on reference designs made by
@@ -72,7 +82,7 @@ config DVB_USB_DIB0700
select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT
select DVB_DIB7000M if MEDIA_SUBDRV_AUTOSELECT
select DVB_DIB8000 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_DIB3000MC if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_USB_DIB3000MC if MEDIA_SUBDRV_AUTOSELECT
select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT
@@ -99,7 +109,7 @@ config DVB_USB_UMT_010
tristate "HanfTek UMT-010 DVB-T USB2.0 support"
depends on DVB_USB
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
- select DVB_DIB3000MC
+ select DVB_USB_DIB3000MC
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
help
@@ -192,7 +202,7 @@ config DVB_USB_GP8PSK
config DVB_USB_NOVA_T_USB2
tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
depends on DVB_USB
- select DVB_DIB3000MC
+ select DVB_USB_DIB3000MC
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
help
diff --git a/drivers/media/usb/dvb-usb/Makefile b/drivers/media/usb/dvb-usb/Makefile
index acdd1efd4e74..8da26352f73b 100644
--- a/drivers/media/usb/dvb-usb/Makefile
+++ b/drivers/media/usb/dvb-usb/Makefile
@@ -16,6 +16,9 @@ obj-$(CONFIG_DVB_USB_DTT200U) += dvb-usb-dtt200u.o
dvb-usb-dibusb-common-objs := dibusb-common.o
+dvb-usb-dibusb-mc-common-objs := dibusb-mc-common.o
+obj-$(CONFIG_DVB_USB_DIB3000MC) += dvb-usb-dibusb-mc-common.o
+
dvb-usb-a800-objs := a800.o
obj-$(CONFIG_DVB_USB_A800) += dvb-usb-dibusb-common.o dvb-usb-a800.o
diff --git a/drivers/media/usb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c
index ef3a8f75f82e..7617ba8ac698 100644
--- a/drivers/media/usb/dvb-usb/dibusb-common.c
+++ b/drivers/media/usb/dvb-usb/dibusb-common.c
@@ -184,164 +184,6 @@ int dibusb_read_eeprom_byte(struct dvb_usb_device *d, u8 offs, u8 *val)
}
EXPORT_SYMBOL(dibusb_read_eeprom_byte);
-/* 3000MC/P stuff */
-// Config Adjacent channels Perf -cal22
-static struct dibx000_agc_config dib3000p_mt2060_agc_config = {
- .band_caps = BAND_VHF | BAND_UHF,
- .setup = (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0),
-
- .agc1_max = 48497,
- .agc1_min = 23593,
- .agc2_max = 46531,
- .agc2_min = 24904,
-
- .agc1_pt1 = 0x65,
- .agc1_pt2 = 0x69,
-
- .agc1_slope1 = 0x51,
- .agc1_slope2 = 0x27,
-
- .agc2_pt1 = 0,
- .agc2_pt2 = 0x33,
-
- .agc2_slope1 = 0x35,
- .agc2_slope2 = 0x37,
-};
-
-static struct dib3000mc_config stk3000p_dib3000p_config = {
- &dib3000p_mt2060_agc_config,
-
- .max_time = 0x196,
- .ln_adc_level = 0x1cc7,
-
- .output_mpeg2_in_188_bytes = 1,
-
- .agc_command1 = 1,
- .agc_command2 = 1,
-};
-
-static struct dibx000_agc_config dib3000p_panasonic_agc_config = {
- .band_caps = BAND_VHF | BAND_UHF,
- .setup = (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0),
-
- .agc1_max = 56361,
- .agc1_min = 22282,
- .agc2_max = 47841,
- .agc2_min = 36045,
-
- .agc1_pt1 = 0x3b,
- .agc1_pt2 = 0x6b,
-
- .agc1_slope1 = 0x55,
- .agc1_slope2 = 0x1d,
-
- .agc2_pt1 = 0,
- .agc2_pt2 = 0x0a,
-
- .agc2_slope1 = 0x95,
- .agc2_slope2 = 0x1e,
-};
-
-#if IS_ENABLED(CONFIG_DVB_DIB3000MC)
-
-static struct dib3000mc_config mod3000p_dib3000p_config = {
- &dib3000p_panasonic_agc_config,
-
- .max_time = 0x51,
- .ln_adc_level = 0x1cc7,
-
- .output_mpeg2_in_188_bytes = 1,
-
- .agc_command1 = 1,
- .agc_command2 = 1,
-};
-
-int dibusb_dib3000mc_frontend_attach(struct dvb_usb_adapter *adap)
-{
- if (le16_to_cpu(adap->dev->udev->descriptor.idVendor) == USB_VID_LITEON &&
- le16_to_cpu(adap->dev->udev->descriptor.idProduct) ==
- USB_PID_LITEON_DVB_T_WARM) {
- msleep(1000);
- }
-
- adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach,
- &adap->dev->i2c_adap,
- DEFAULT_DIB3000P_I2C_ADDRESS,
- &mod3000p_dib3000p_config);
- if ((adap->fe_adap[0].fe) == NULL)
- adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach,
- &adap->dev->i2c_adap,
- DEFAULT_DIB3000MC_I2C_ADDRESS,
- &mod3000p_dib3000p_config);
- if ((adap->fe_adap[0].fe) != NULL) {
- if (adap->priv != NULL) {
- struct dibusb_state *st = adap->priv;
- st->ops.pid_parse = dib3000mc_pid_parse;
- st->ops.pid_ctrl = dib3000mc_pid_control;
- }
- return 0;
- }
- return -ENODEV;
-}
-EXPORT_SYMBOL(dibusb_dib3000mc_frontend_attach);
-
-static struct mt2060_config stk3000p_mt2060_config = {
- 0x60
-};
-
-int dibusb_dib3000mc_tuner_attach(struct dvb_usb_adapter *adap)
-{
- struct dibusb_state *st = adap->priv;
- u8 a,b;
- u16 if1 = 1220;
- struct i2c_adapter *tun_i2c;
-
- // First IF calibration for Liteon Sticks
- if (le16_to_cpu(adap->dev->udev->descriptor.idVendor) == USB_VID_LITEON &&
- le16_to_cpu(adap->dev->udev->descriptor.idProduct) == USB_PID_LITEON_DVB_T_WARM) {
-
- dibusb_read_eeprom_byte(adap->dev,0x7E,&a);
- dibusb_read_eeprom_byte(adap->dev,0x7F,&b);
-
- if (a == 0x00)
- if1 += b;
- else if (a == 0x80)
- if1 -= b;
- else
- warn("LITE-ON DVB-T: Strange IF1 calibration :%2X %2X\n", a, b);
-
- } else if (le16_to_cpu(adap->dev->udev->descriptor.idVendor) == USB_VID_DIBCOM &&
- le16_to_cpu(adap->dev->udev->descriptor.idProduct) == USB_PID_DIBCOM_MOD3001_WARM) {
- u8 desc;
- dibusb_read_eeprom_byte(adap->dev, 7, &desc);
- if (desc == 2) {
- a = 127;
- do {
- dibusb_read_eeprom_byte(adap->dev, a, &desc);
- a--;
- } while (a > 7 && (desc == 0xff || desc == 0x00));
- if (desc & 0x80)
- if1 -= (0xff - desc);
- else
- if1 += desc;
- }
- }
-
- tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
- if (dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk3000p_mt2060_config, if1) == NULL) {
- /* not found - use panasonic pll parameters */
- if (dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, tun_i2c, DVB_PLL_ENV57H1XD5) == NULL)
- return -ENOMEM;
- } else {
- st->mt2060_present = 1;
- /* set the correct parameters for the dib3000p */
- dib3000mc_set_config(adap->fe_adap[0].fe, &stk3000p_dib3000p_config);
- }
- return 0;
-}
-EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach);
-#endif
-
/*
* common remote control stuff
*/
diff --git a/drivers/media/usb/dvb-usb/dibusb-mc-common.c b/drivers/media/usb/dvb-usb/dibusb-mc-common.c
new file mode 100644
index 000000000000..d66f56cc46a5
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/dibusb-mc-common.c
@@ -0,0 +1,168 @@
+/* Common methods for dibusb-based-receivers.
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@xxxxxxx)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+
+#include <linux/kconfig.h>
+#include "dibusb.h"
+
+/* 3000MC/P stuff */
+// Config Adjacent channels Perf -cal22
+static struct dibx000_agc_config dib3000p_mt2060_agc_config = {
+ .band_caps = BAND_VHF | BAND_UHF,
+ .setup = (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0),
+
+ .agc1_max = 48497,
+ .agc1_min = 23593,
+ .agc2_max = 46531,
+ .agc2_min = 24904,
+
+ .agc1_pt1 = 0x65,
+ .agc1_pt2 = 0x69,
+
+ .agc1_slope1 = 0x51,
+ .agc1_slope2 = 0x27,
+
+ .agc2_pt1 = 0,
+ .agc2_pt2 = 0x33,
+
+ .agc2_slope1 = 0x35,
+ .agc2_slope2 = 0x37,
+};
+
+static struct dib3000mc_config stk3000p_dib3000p_config = {
+ &dib3000p_mt2060_agc_config,
+
+ .max_time = 0x196,
+ .ln_adc_level = 0x1cc7,
+
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_command1 = 1,
+ .agc_command2 = 1,
+};
+
+static struct dibx000_agc_config dib3000p_panasonic_agc_config = {
+ .band_caps = BAND_VHF | BAND_UHF,
+ .setup = (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0),
+
+ .agc1_max = 56361,
+ .agc1_min = 22282,
+ .agc2_max = 47841,
+ .agc2_min = 36045,
+
+ .agc1_pt1 = 0x3b,
+ .agc1_pt2 = 0x6b,
+
+ .agc1_slope1 = 0x55,
+ .agc1_slope2 = 0x1d,
+
+ .agc2_pt1 = 0,
+ .agc2_pt2 = 0x0a,
+
+ .agc2_slope1 = 0x95,
+ .agc2_slope2 = 0x1e,
+};
+
+static struct dib3000mc_config mod3000p_dib3000p_config = {
+ &dib3000p_panasonic_agc_config,
+
+ .max_time = 0x51,
+ .ln_adc_level = 0x1cc7,
+
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_command1 = 1,
+ .agc_command2 = 1,
+};
+
+int dibusb_dib3000mc_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ if (le16_to_cpu(adap->dev->udev->descriptor.idVendor) == USB_VID_LITEON &&
+ le16_to_cpu(adap->dev->udev->descriptor.idProduct) ==
+ USB_PID_LITEON_DVB_T_WARM) {
+ msleep(1000);
+ }
+
+ adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach,
+ &adap->dev->i2c_adap,
+ DEFAULT_DIB3000P_I2C_ADDRESS,
+ &mod3000p_dib3000p_config);
+ if ((adap->fe_adap[0].fe) == NULL)
+ adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach,
+ &adap->dev->i2c_adap,
+ DEFAULT_DIB3000MC_I2C_ADDRESS,
+ &mod3000p_dib3000p_config);
+ if ((adap->fe_adap[0].fe) != NULL) {
+ if (adap->priv != NULL) {
+ struct dibusb_state *st = adap->priv;
+ st->ops.pid_parse = dib3000mc_pid_parse;
+ st->ops.pid_ctrl = dib3000mc_pid_control;
+ }
+ return 0;
+ }
+ return -ENODEV;
+}
+EXPORT_SYMBOL(dibusb_dib3000mc_frontend_attach);
+
+static struct mt2060_config stk3000p_mt2060_config = {
+ 0x60
+};
+
+int dibusb_dib3000mc_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dibusb_state *st = adap->priv;
+ u8 a,b;
+ u16 if1 = 1220;
+ struct i2c_adapter *tun_i2c;
+
+ // First IF calibration for Liteon Sticks
+ if (le16_to_cpu(adap->dev->udev->descriptor.idVendor) == USB_VID_LITEON &&
+ le16_to_cpu(adap->dev->udev->descriptor.idProduct) == USB_PID_LITEON_DVB_T_WARM) {
+
+ dibusb_read_eeprom_byte(adap->dev,0x7E,&a);
+ dibusb_read_eeprom_byte(adap->dev,0x7F,&b);
+
+ if (a == 0x00)
+ if1 += b;
+ else if (a == 0x80)
+ if1 -= b;
+ else
+ warn("LITE-ON DVB-T: Strange IF1 calibration :%2X %2X\n", a, b);
+
+ } else if (le16_to_cpu(adap->dev->udev->descriptor.idVendor) == USB_VID_DIBCOM &&
+ le16_to_cpu(adap->dev->udev->descriptor.idProduct) == USB_PID_DIBCOM_MOD3001_WARM) {
+ u8 desc;
+ dibusb_read_eeprom_byte(adap->dev, 7, &desc);
+ if (desc == 2) {
+ a = 127;
+ do {
+ dibusb_read_eeprom_byte(adap->dev, a, &desc);
+ a--;
+ } while (a > 7 && (desc == 0xff || desc == 0x00));
+ if (desc & 0x80)
+ if1 -= (0xff - desc);
+ else
+ if1 += desc;
+ }
+ }
+
+ tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
+ if (dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk3000p_mt2060_config, if1) == NULL) {
+ /* not found - use panasonic pll parameters */
+ if (dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, tun_i2c, DVB_PLL_ENV57H1XD5) == NULL)
+ return -ENOMEM;
+ } else {
+ st->mt2060_present = 1;
+ /* set the correct parameters for the dib3000p */
+ dib3000mc_set_config(adap->fe_adap[0].fe, &stk3000p_dib3000p_config);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach);
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
