On 03/21/2015 12:18 PM, Benjamin Larsson wrote:
On 03/21/2015 12:25 AM, Antti Palosaari wrote:
On 03/21/2015 01:13 AM, Benjamin Larsson wrote:
On 03/19/2015 03:44 PM, Antti Palosaari wrote:
Bad news. It does lock for DVB-C now, but DVB-T nor DVB-T2 does not
lock.
regards
Antti
I'm getting tired :/. Had the time to test now and the checks is
supposed to be negated.
if (utmp & 0xA0) { -> if (!(utmp & 0xA0))
But as stock dvbv5-scan crashes on ubuntu 14.04 and I can't unload the
mn88473 module I will confirm this when I have an actual working version
of dvbv5-scan and Ubuntu.
You could also use w_scan. Or install latest dvbv5-scan from git - it
works even without install by running from compile directory.
Ok, will try that later.
Anyway, I tried the attached patch and I was able to get a lock after a
reboot from windows with the windows driver initializing the stick. If I
replugged the stick I get no signal and if I try the rtl2832 demod it
reports the same. So I think that my signal is just to weak for the
kernel r820t driver. So it would be nice if you could test this patch
and see if it works.
Now it works. Next time I really expect you will test your patches
somehow before sending. Now I tested 3 different patch versions, find 2
first to be broken and last one working. It took around 2 hours of my time.
Patch applied.
Antti
regards
Antti
MvH
Benjamin Larsson
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
