Add lane-polarity property to endpoint nodes. This essentially tells that the order of the differential signal wires is inverted. Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxx> Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> --- since v1: - Rename lane-polarity property as lane-polarities. Documentation/devicetree/bindings/media/video-interfaces.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index 571b4c6..9cd2a36 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -106,6 +106,12 @@ Optional endpoint properties - link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for instance, this is the actual frequency of the bus, not bits per clock per lane value. An array of 64-bit unsigned integers. +- lane-polarities: an array of polarities of the lanes starting from the clock + lane and followed by the data lanes in the same order as in data-lanes. + Valid values are 0 (normal) and 1 (inverted). The length of the array + should be the combined length of data-lanes and clock-lanes properties. + If the lane-polarities property is omitted, the value must be interpreted + as 0 (normal). This property is valid for serial busses only. Example -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
