Hi Laurent,
On Sat, Mar 14, 2015 at 04:57:37PM +0200, Laurent Pinchart wrote:
...
> diff --git a/Documentation/devicetree/bindings/media/i2c/mt9v032.txt b/Documentation/devicetree/bindings/media/i2c/mt9v032.txt
> new file mode 100644
> index 0000000..68b134e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/mt9v032.txt
> @@ -0,0 +1,45 @@
> +* Aptina 1/3-Inch WVGA CMOS Digital Image Sensor
> +
> +The Aptina MT9V032 is a 1/3-inch CMOS active pixel digital image sensor with
> +an active array size of 752H x 480V. It is programmable through a simple
> +two-wire serial interface.
> +
> +Required Properties:
> +
> +- compatible: value should be either one among the following
> + (a) "aptina,mt9v022" for MT9V022 color sensor
> + (b) "aptina,mt9v022m" for MT9V022 monochrome sensor
> + (c) "aptina,mt9v024" for MT9V024 color sensor
> + (d) "aptina,mt9v024m" for MT9V024 monochrome sensor
> + (e) "aptina,mt9v032" for MT9V032 color sensor
> + (f) "aptina,mt9v032m" for MT9V032 monochrome sensor
> + (g) "aptina,mt9v034" for MT9V034 color sensor
> + (h) "aptina,mt9v034m" for MT9V034 monochrome sensor
> +
> +Optional Properties:
> +
> +- link-frequencies: List of allowed link frequencies in Hz. Each frequency is
> + expressed as a 64-bit big-endian integer.
> +
> +For further reading on port node refer to
> +Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +Example:
> +
> + i2c0@1c22000 {
> + ...
> + ...
> + mt9v032@5c {
> + compatible = "aptina,mt9v032";
> + reg = <0x5c>;
> +
> + port {
> + mt9v032_1: endpoint {
> + link-frequencies =
> + <0 13000000>, <0 26600000>,
How about:
/bits/ 64 <13000000> ...
> + <0 27000000>;
> + };
> + };
> + };
> + ...
> + };
> diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c
> index 255ea91..139eeef 100644
> --- a/drivers/media/i2c/mt9v032.c
> +++ b/drivers/media/i2c/mt9v032.c
> @@ -17,6 +17,8 @@
> #include <linux/i2c.h>
> #include <linux/log2.h>
> #include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
> #include <linux/regmap.h>
> #include <linux/slab.h>
> #include <linux/videodev2.h>
> @@ -26,6 +28,7 @@
> #include <media/mt9v032.h>
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-device.h>
> +#include <media/v4l2-of.h>
> #include <media/v4l2-subdev.h>
>
> /* The first four rows are black rows. The active area spans 753x481 pixels. */
> @@ -876,10 +879,59 @@ static const struct regmap_config mt9v032_regmap_config = {
> * Driver initialization and probing
> */
>
> +static struct mt9v032_platform_data *
> +mt9v032_get_pdata(struct i2c_client *client)
> +{
> + struct mt9v032_platform_data *pdata;
> + struct v4l2_of_endpoint endpoint;
> + struct device_node *np;
> + struct property *prop;
> +
> + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
> + return client->dev.platform_data;
> +
> + np = of_graph_get_next_endpoint(client->dev.of_node, NULL);
> + if (!np)
> + return NULL;
> +
> + if (v4l2_of_parse_endpoint(np, &endpoint) < 0)
> + goto done;
> +
> + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + goto done;
> +
> + prop = of_find_property(np, "link-frequencies", NULL);
> + if (prop) {
> + size_t size = prop->length / 8;
> + u64 *link_freqs;
> +
> + link_freqs = devm_kzalloc(&client->dev,
> + size * sizeof(*link_freqs),
You could simply use prop->length here. I think that'd look nicer.
> + GFP_KERNEL);
> + if (!link_freqs)
> + goto done;
> +
> + if (of_property_read_u64_array(np, "link-frequencies",
> + link_freqs, size) < 0)
> + goto done;
> +
> + pdata->link_freqs = link_freqs;
> + pdata->link_def_freq = link_freqs[0];
> + }
> +
> + pdata->clk_pol = !!(endpoint.bus.parallel.flags &
> + V4L2_MBUS_PCLK_SAMPLE_RISING);
> +
> +done:
> + of_node_put(np);
> + return pdata;
> +}
> +
> static int mt9v032_probe(struct i2c_client *client,
> const struct i2c_device_id *did)
> {
> - struct mt9v032_platform_data *pdata = client->dev.platform_data;
> + struct mt9v032_platform_data *pdata = mt9v032_get_pdata(client);
> struct mt9v032 *mt9v032;
> unsigned int i;
> int ret;
> @@ -1037,9 +1089,25 @@ static const struct i2c_device_id mt9v032_id[] = {
> };
> MODULE_DEVICE_TABLE(i2c, mt9v032_id);
>
> +#if IS_ENABLED(CONFIG_OF)
> +static const struct of_device_id mt9v032_of_match[] = {
> + { .compatible = "aptina,mt9v022" },
> + { .compatible = "aptina,mt9v022m" },
> + { .compatible = "aptina,mt9v024" },
> + { .compatible = "aptina,mt9v024m" },
> + { .compatible = "aptina,mt9v032" },
> + { .compatible = "aptina,mt9v032m" },
> + { .compatible = "aptina,mt9v034" },
> + { .compatible = "aptina,mt9v034m" },
> + { /* Sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mt9v032_of_match);
> +#endif
> +
> static struct i2c_driver mt9v032_driver = {
> .driver = {
> .name = "mt9v032",
> + .of_match_table = of_match_ptr(mt9v032_of_match),
> },
> .probe = mt9v032_probe,
> .remove = mt9v032_remove,
--
Kind regards,
Sakari Ailus
e-mail: sakari.ailus@xxxxxx XMPP: sailus@xxxxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
