Hi Carlos,
Thank you for the review.
On Monday 09 March 2015 10:45:31 Carlos Sanmartín Bustos wrote:
> Hi Laurent,
>
> Looks good. One question, why not deprecate the platform data? I can't
> see any device using the mt9v032 pdata, I was making a similar patch
> but deprecating pdata.
The sensor could be used on non-DT platforms. As keeping platform data support
doesn't really make the code more complex and doesn't prevent cleanups or
other refactoring, I don't see much harm in keeping it for now.
For DT-based platforms, of course, DT should be used.
> Some more comment:
>
> 2015-03-08 14:45 GMT+01:00 Laurent Pinchart:
> > Parse DT properties into a platform data structure when a DT node is
> > available.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > ---
> >
> > .../devicetree/bindings/media/i2c/mt9v032.txt | 41 ++++++++++++++
> > MAINTAINERS | 1 +
> > drivers/media/i2c/mt9v032.c | 66 ++++++++++++++++-
> > 3 files changed, 107 insertions(+), 1 deletion(-)
> > create mode 100644
> > Documentation/devicetree/bindings/media/i2c/mt9v032.txt
[snip]
> > diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c
> > index 3267c18..a6ea091 100644
> > --- a/drivers/media/i2c/mt9v032.c
> > +++ b/drivers/media/i2c/mt9v032.c
[snip]
> > +static struct mt9v032_platform_data *
> > +mt9v032_get_pdata(struct i2c_client *client)
> > +{
> > + struct mt9v032_platform_data *pdata;
> > + struct v4l2_of_endpoint endpoint;
> > + struct device_node *np;
> > + struct property *prop;
> > +
> > + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
> > + return client->dev.platform_data;
> > +
> > + np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
> > + if (!np)
> > + return NULL;
> > +
> > + if (v4l2_of_parse_endpoint(np, &endpoint) < 0)
> > + goto done;
>
> Here I have one little testing:
>
> if (endpoint.bus_type != V4L2_MBUS_PARALLEL) {
> dev_err(dev, "invalid bus type, must be parallel\n");
> goto done;
> }
Good question, should drivers check DT properties that they don't use, in
order to catch errors in DT ? This would slightly increase the kernel size in
order to prevent people from connecting a parallel sensor to a CSI-2 bus,
which is obviously impossible in hardware :-)
> > +
> > + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
> > + if (!pdata)
> > + goto done;
> > +
> > + prop = of_find_property(np, "link-freqs", NULL);
> > + if (prop) {
> > + size_t size = prop->length / 8;
> > + u64 *link_freqs;
> > +
> > + link_freqs = devm_kzalloc(&client->dev,
> > + size * sizeof(*link_freqs),
> > + GFP_KERNEL);
> > + if (!link_freqs)
> > + goto done;
> > +
> > + if (of_property_read_u64_array(np, "link-frequencies",
> > + link_freqs, size) < 0)
> > + goto done;
> > +
> > + pdata->link_freqs = link_freqs;
> > + pdata->link_def_freq = link_freqs[0];
> > + }
> > +
> > + pdata->clk_pol = !!(endpoint.bus.parallel.flags &
> > + V4L2_MBUS_PCLK_SAMPLE_RISING);
> > +
> > +done:
> > + of_node_put(np);
> > + return pdata;
> > +}
[snip]
> > @@ -1034,9 +1086,21 @@ static const struct i2c_device_id mt9v032_id[] = {
> > };
> > MODULE_DEVICE_TABLE(i2c, mt9v032_id);
> >
> > +#if IS_ENABLED(CONFIG_OF)
> > +static const struct of_device_id mt9v032_of_match[] = {
> > + { .compatible = "mt9v032" },
> > + { .compatible = "mt9v032m" },
> > + { .compatible = "mt9v034" },
> > + { .compatible = "mt9v034m" },
> > + { /* Sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, mt9v032_of_match);
> > +#endif
>
> I have this:
> #if IS_ENABLED(CONFIG_OF)
> static const struct of_device_id mt9v032_of_match[] = {
> { .compatible = "aptina,mt9v022", },
> { .compatible = "aptina,mt9v022m", },
> { .compatible = "aptina,mt9v024", },
> { .compatible = "aptina,mt9v024m", },
> { .compatible = "aptina,mt9v032", },
> { .compatible = "aptina,mt9v032m", },
> { .compatible = "aptina,mt9v034", },
> { .compatible = "aptina,mt9v034m", },
Looks like I forgot to update my patch for mt9v02* support. Sorry about that,
I'll fix it. And the "aptina," prefix of course belongs there.
> { /* sentinel */ },
> };
>
> MODULE_DEVICE_TABLE(of, mt9v032_of_match);
> #endi
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
