I moved it to a dual boot system, and it works in windows, and the same error in Linux. The chips are marked: Conexant CX23880 Samsung S5H1411 Cirrus CS5340CZZ Atmel ATMLH138 three out of four are a different part number than the Wiki. It is Board T1213044 stamped on back PCTV 800i Rev 1.1 Shield over tuner says "pctv systems" There are 5 APL1117 on both sides of the board. Since the tuner is probably under the shield I don't know a non-destructive method to get the part number. >From: Steven Toth <stoth@xxxxxxxxxxxxxx> >Date: Mon, Jan 26, 2015 at 6:44 AM >Subject: Re: PCTV 800i >To: John Klug <ski.brimson@xxxxxxxxx> >Cc: Linux-Media <linux-media@xxxxxxxxxxxxxxx> >On Mon, Jan 26, 2015 at 12:50 AM, John Klug <ski.brimson@xxxxxxxxx> wrote: >> I have a new PCTV card with CX23880 (not CX23883 as shown in the picture): >> >> http://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_HD_Card_(800i) >> >> The description is out of date with respect to my recent card. >> >> It did not work in 3.12.20, 3.17.7, and I finally downloaded the >> latest GIT of media_build to no avail (I have a 2nd card that is CX18, >> which is interspersed in the output). >The error messages suggest one or more of the components on the board, >or their I2C addresses have changed, or that your hardware is bad. >Other than the Conexant PCI bridge, do the other components listed in >the wiki page match the components on your physical device? > >-- >Steven Toth - Kernel Labs >http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
