Consistently prefix register defines with ADV7180_REG. Also remove the "ADI"
from register names, the ADV7180 prefix should provide enough of a namespace
separation.
Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
Acked-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
drivers/media/i2c/adv7180.c | 105 ++++++++++++++++++++++----------------------
1 file changed, 52 insertions(+), 53 deletions(-)
diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index f2508abe..00ba845 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -31,7 +31,7 @@
#include <media/v4l2-ctrls.h>
#include <linux/mutex.h>
-#define ADV7180_INPUT_CONTROL_REG 0x00
+#define ADV7180_REG_INPUT_CONTROL 0x00
#define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM 0x00
#define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM_PED 0x10
#define ADV7180_INPUT_CONTROL_AD_PAL_N_NTSC_J_SECAM 0x20
@@ -50,36 +50,36 @@
#define ADV7180_INPUT_CONTROL_PAL_SECAM_PED 0xf0
#define ADV7180_INPUT_CONTROL_INSEL_MASK 0x0f
-#define ADV7180_EXTENDED_OUTPUT_CONTROL_REG 0x04
+#define ADV7180_REG_EXTENDED_OUTPUT_CONTROL 0x04
#define ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS 0xC5
-#define ADV7180_AUTODETECT_ENABLE_REG 0x07
+#define ADV7180_REG_AUTODETECT_ENABLE 0x07
#define ADV7180_AUTODETECT_DEFAULT 0x7f
/* Contrast */
-#define ADV7180_CON_REG 0x08 /*Unsigned */
+#define ADV7180_REG_CON 0x08 /*Unsigned */
#define ADV7180_CON_MIN 0
#define ADV7180_CON_DEF 128
#define ADV7180_CON_MAX 255
/* Brightness*/
-#define ADV7180_BRI_REG 0x0a /*Signed */
+#define ADV7180_REG_BRI 0x0a /*Signed */
#define ADV7180_BRI_MIN -128
#define ADV7180_BRI_DEF 0
#define ADV7180_BRI_MAX 127
/* Hue */
-#define ADV7180_HUE_REG 0x0b /*Signed, inverted */
+#define ADV7180_REG_HUE 0x0b /*Signed, inverted */
#define ADV7180_HUE_MIN -127
#define ADV7180_HUE_DEF 0
#define ADV7180_HUE_MAX 128
-#define ADV7180_ADI_CTRL_REG 0x0e
-#define ADV7180_ADI_CTRL_IRQ_SPACE 0x20
+#define ADV7180_REG_CTRL 0x0e
+#define ADV7180_CTRL_IRQ_SPACE 0x20
-#define ADV7180_PWR_MAN_REG 0x0f
+#define ADV7180_REG_PWR_MAN 0x0f
#define ADV7180_PWR_MAN_ON 0x04
#define ADV7180_PWR_MAN_OFF 0x24
#define ADV7180_PWR_MAN_RES 0x80
-#define ADV7180_STATUS1_REG 0x10
+#define ADV7180_REG_STATUS1 0x10
#define ADV7180_STATUS1_IN_LOCK 0x01
#define ADV7180_STATUS1_AUTOD_MASK 0x70
#define ADV7180_STATUS1_AUTOD_NTSM_M_J 0x00
@@ -91,33 +91,33 @@
#define ADV7180_STATUS1_AUTOD_PAL_COMB 0x60
#define ADV7180_STATUS1_AUTOD_SECAM_525 0x70
-#define ADV7180_IDENT_REG 0x11
+#define ADV7180_REG_IDENT 0x11
#define ADV7180_ID_7180 0x18
-#define ADV7180_ICONF1_ADI 0x40
+#define ADV7180_REG_ICONF1 0x40
#define ADV7180_ICONF1_ACTIVE_LOW 0x01
#define ADV7180_ICONF1_PSYNC_ONLY 0x10
#define ADV7180_ICONF1_ACTIVE_TO_CLR 0xC0
/* Saturation */
-#define ADV7180_SD_SAT_CB_REG 0xe3 /*Unsigned */
-#define ADV7180_SD_SAT_CR_REG 0xe4 /*Unsigned */
+#define ADV7180_REG_SD_SAT_CB 0xe3 /*Unsigned */
+#define ADV7180_REG_SD_SAT_CR 0xe4 /*Unsigned */
#define ADV7180_SAT_MIN 0
#define ADV7180_SAT_DEF 128
#define ADV7180_SAT_MAX 255
#define ADV7180_IRQ1_LOCK 0x01
#define ADV7180_IRQ1_UNLOCK 0x02
-#define ADV7180_ISR1_ADI 0x42
-#define ADV7180_ICR1_ADI 0x43
-#define ADV7180_IMR1_ADI 0x44
-#define ADV7180_IMR2_ADI 0x48
+#define ADV7180_REG_ISR1 0x42
+#define ADV7180_REG_ICR1 0x43
+#define ADV7180_REG_IMR1 0x44
+#define ADV7180_REG_IMR2 0x48
#define ADV7180_IRQ3_AD_CHANGE 0x08
-#define ADV7180_ISR3_ADI 0x4A
-#define ADV7180_ICR3_ADI 0x4B
-#define ADV7180_IMR3_ADI 0x4C
-#define ADV7180_IMR4_ADI 0x50
+#define ADV7180_REG_ISR3 0x4A
+#define ADV7180_REG_ICR3 0x4B
+#define ADV7180_REG_IMR3 0x4C
+#define ADV7180_REG_IMR4 0x50
-#define ADV7180_NTSC_V_BIT_END_REG 0xE6
+#define ADV7180_REG_NTSC_V_BIT_END 0xE6
#define ADV7180_NTSC_V_BIT_END_MANUAL_NVEND 0x4F
struct adv7180_state {
@@ -198,7 +198,7 @@ static u32 adv7180_status_to_v4l2(u8 status1)
static int __adv7180_status(struct i2c_client *client, u32 *status,
v4l2_std_id *std)
{
- int status1 = i2c_smbus_read_byte_data(client, ADV7180_STATUS1_REG);
+ int status1 = i2c_smbus_read_byte_data(client, ADV7180_REG_STATUS1);
if (status1 < 0)
return status1;
@@ -249,14 +249,13 @@ static int adv7180_s_routing(struct v4l2_subdev *sd, u32 input,
if ((input & ADV7180_INPUT_CONTROL_INSEL_MASK) != input)
goto out;
- ret = i2c_smbus_read_byte_data(client, ADV7180_INPUT_CONTROL_REG);
-
+ ret = i2c_smbus_read_byte_data(client, ADV7180_REG_INPUT_CONTROL);
if (ret < 0)
goto out;
ret &= ~ADV7180_INPUT_CONTROL_INSEL_MASK;
ret = i2c_smbus_write_byte_data(client,
- ADV7180_INPUT_CONTROL_REG, ret | input);
+ ADV7180_REG_INPUT_CONTROL, ret | input);
state->input = input;
out:
mutex_unlock(&state->mutex);
@@ -286,7 +285,7 @@ static int adv7180_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
/* all standards -> autodetect */
if (std == V4L2_STD_ALL) {
ret =
- i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
+ i2c_smbus_write_byte_data(client, ADV7180_REG_INPUT_CONTROL,
ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM
| state->input);
if (ret < 0)
@@ -300,7 +299,7 @@ static int adv7180_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
goto out;
ret = i2c_smbus_write_byte_data(client,
- ADV7180_INPUT_CONTROL_REG,
+ ADV7180_REG_INPUT_CONTROL,
ret | state->input);
if (ret < 0)
goto out;
@@ -324,7 +323,7 @@ static int adv7180_set_power(struct adv7180_state *state,
else
val = ADV7180_PWR_MAN_OFF;
- return i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG, val);
+ return i2c_smbus_write_byte_data(client, ADV7180_REG_PWR_MAN, val);
}
static int adv7180_s_power(struct v4l2_subdev *sd, int on)
@@ -357,25 +356,25 @@ static int adv7180_s_ctrl(struct v4l2_ctrl *ctrl)
val = ctrl->val;
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
- ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG, val);
+ ret = i2c_smbus_write_byte_data(client, ADV7180_REG_BRI, val);
break;
case V4L2_CID_HUE:
/*Hue is inverted according to HSL chart */
- ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, -val);
+ ret = i2c_smbus_write_byte_data(client, ADV7180_REG_HUE, -val);
break;
case V4L2_CID_CONTRAST:
- ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG, val);
+ ret = i2c_smbus_write_byte_data(client, ADV7180_REG_CON, val);
break;
case V4L2_CID_SATURATION:
/*
*This could be V4L2_CID_BLUE_BALANCE/V4L2_CID_RED_BALANCE
*Let's not confuse the user, everybody understands saturation
*/
- ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG,
+ ret = i2c_smbus_write_byte_data(client, ADV7180_REG_SD_SAT_CB,
val);
if (ret < 0)
break;
- ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG,
+ ret = i2c_smbus_write_byte_data(client, ADV7180_REG_SD_SAT_CR,
val);
break;
default:
@@ -489,12 +488,12 @@ static irqreturn_t adv7180_irq(int irq, void *devid)
u8 isr3;
mutex_lock(&state->mutex);
- i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
- ADV7180_ADI_CTRL_IRQ_SPACE);
- isr3 = i2c_smbus_read_byte_data(client, ADV7180_ISR3_ADI);
+ i2c_smbus_write_byte_data(client, ADV7180_REG_CTRL,
+ ADV7180_CTRL_IRQ_SPACE);
+ isr3 = i2c_smbus_read_byte_data(client, ADV7180_REG_ISR3);
/* clear */
- i2c_smbus_write_byte_data(client, ADV7180_ICR3_ADI, isr3);
- i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, 0);
+ i2c_smbus_write_byte_data(client, ADV7180_REG_ICR3, isr3);
+ i2c_smbus_write_byte_data(client, ADV7180_REG_CTRL, 0);
if (isr3 & ADV7180_IRQ3_AD_CHANGE && state->autodetect)
__adv7180_status(client, NULL, &state->curr_norm);
@@ -511,7 +510,7 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state)
/* Enable autodetection */
if (state->autodetect) {
ret =
- i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
+ i2c_smbus_write_byte_data(client, ADV7180_REG_INPUT_CONTROL,
ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM
| state->input);
if (ret < 0)
@@ -519,7 +518,7 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state)
ret =
i2c_smbus_write_byte_data(client,
- ADV7180_AUTODETECT_ENABLE_REG,
+ ADV7180_REG_AUTODETECT_ENABLE,
ADV7180_AUTODETECT_DEFAULT);
if (ret < 0)
return ret;
@@ -529,7 +528,7 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state)
return ret;
ret =
- i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
+ i2c_smbus_write_byte_data(client, ADV7180_REG_INPUT_CONTROL,
ret | state->input);
if (ret < 0)
return ret;
@@ -537,14 +536,14 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state)
}
/* ITU-R BT.656-4 compatible */
ret = i2c_smbus_write_byte_data(client,
- ADV7180_EXTENDED_OUTPUT_CONTROL_REG,
+ ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS);
if (ret < 0)
return ret;
/* Manually set V bit end position in NTSC mode */
ret = i2c_smbus_write_byte_data(client,
- ADV7180_NTSC_V_BIT_END_REG,
+ ADV7180_REG_NTSC_V_BIT_END,
ADV7180_NTSC_V_BIT_END_MANUAL_NVEND);
if (ret < 0)
return ret;
@@ -554,37 +553,37 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state)
/* register for interrupts */
if (state->irq > 0) {
- ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
- ADV7180_ADI_CTRL_IRQ_SPACE);
+ ret = i2c_smbus_write_byte_data(client, ADV7180_REG_CTRL,
+ ADV7180_CTRL_IRQ_SPACE);
if (ret < 0)
goto err;
/* config the Interrupt pin to be active low */
- ret = i2c_smbus_write_byte_data(client, ADV7180_ICONF1_ADI,
+ ret = i2c_smbus_write_byte_data(client, ADV7180_REG_ICONF1,
ADV7180_ICONF1_ACTIVE_LOW |
ADV7180_ICONF1_PSYNC_ONLY);
if (ret < 0)
goto err;
- ret = i2c_smbus_write_byte_data(client, ADV7180_IMR1_ADI, 0);
+ ret = i2c_smbus_write_byte_data(client, ADV7180_REG_IMR1, 0);
if (ret < 0)
goto err;
- ret = i2c_smbus_write_byte_data(client, ADV7180_IMR2_ADI, 0);
+ ret = i2c_smbus_write_byte_data(client, ADV7180_REG_IMR2, 0);
if (ret < 0)
goto err;
/* enable AD change interrupts interrupts */
- ret = i2c_smbus_write_byte_data(client, ADV7180_IMR3_ADI,
+ ret = i2c_smbus_write_byte_data(client, ADV7180_REG_IMR3,
ADV7180_IRQ3_AD_CHANGE);
if (ret < 0)
goto err;
- ret = i2c_smbus_write_byte_data(client, ADV7180_IMR4_ADI, 0);
+ ret = i2c_smbus_write_byte_data(client, ADV7180_REG_IMR4, 0);
if (ret < 0)
goto err;
- ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
+ ret = i2c_smbus_write_byte_data(client, ADV7180_REG_CTRL,
0);
if (ret < 0)
goto err;
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
