Hi Hao, Why would you do this? read/writew() is AFAICT not the same as bfin_read/write16 (defined in arch/blackfin/include/asm/def_LPBlackfin.h). And all other blackfin sources I've seen all use bfin_read/write. So unless there is a good reason for this change I am not going to accept this. Regards, Hans On 01/14/2015 07:57 AM, Hao Liang wrote: > Signed-off-by: Hao Liang <hliang1025@xxxxxxxxx> > --- > drivers/media/platform/blackfin/ppi.c | 72 ++++++++++++++++----------------- > 1 file changed, 35 insertions(+), 37 deletions(-) > > diff --git a/drivers/media/platform/blackfin/ppi.c b/drivers/media/platform/blackfin/ppi.c > index cff63e5..de4b5c7 100644 > --- a/drivers/media/platform/blackfin/ppi.c > +++ b/drivers/media/platform/blackfin/ppi.c > @@ -20,6 +20,7 @@ > #include <linux/module.h> > #include <linux/slab.h> > #include <linux/platform_device.h> > +#include <linux/io.h> > > #include <asm/bfin_ppi.h> > #include <asm/blackfin.h> > @@ -59,10 +60,10 @@ static irqreturn_t ppi_irq_err(int irq, void *dev_id) > /* register on bf561 is cleared when read > * others are W1C > */ > - status = bfin_read16(®->status); > + status = readw(®->status); > if (status & 0x3000) > ppi->err = true; > - bfin_write16(®->status, 0xff00); > + writew(0xff00, ®->status); > break; > } > case PPI_TYPE_EPPI: > @@ -70,10 +71,10 @@ static irqreturn_t ppi_irq_err(int irq, void *dev_id) > struct bfin_eppi_regs *reg = info->base; > unsigned short status; > > - status = bfin_read16(®->status); > + status = readw(®->status); > if (status & 0x2) > ppi->err = true; > - bfin_write16(®->status, 0xffff); > + writew(0xffff, ®->status); > break; > } > case PPI_TYPE_EPPI3: > @@ -81,10 +82,10 @@ static irqreturn_t ppi_irq_err(int irq, void *dev_id) > struct bfin_eppi3_regs *reg = info->base; > unsigned long stat; > > - stat = bfin_read32(®->stat); > + stat = readl(®->stat); > if (stat & 0x2) > ppi->err = true; > - bfin_write32(®->stat, 0xc0ff); > + writel(0xc0ff, ®->stat); > break; > } > default: > @@ -139,26 +140,25 @@ static int ppi_start(struct ppi_if *ppi) > case PPI_TYPE_PPI: > { > struct bfin_ppi_regs *reg = info->base; > - bfin_write16(®->control, ppi->ppi_control); > + writew(ppi->ppi_control, ®->control); > break; > } > case PPI_TYPE_EPPI: > { > struct bfin_eppi_regs *reg = info->base; > - bfin_write32(®->control, ppi->ppi_control); > + writel(ppi->ppi_control, ®->control); > break; > } > case PPI_TYPE_EPPI3: > { > struct bfin_eppi3_regs *reg = info->base; > - bfin_write32(®->ctl, ppi->ppi_control); > + writel(ppi->ppi_control, ®->ctl); > break; > } > default: > return -EINVAL; > } > > - SSYNC(); > return 0; > } > > @@ -172,19 +172,19 @@ static int ppi_stop(struct ppi_if *ppi) > case PPI_TYPE_PPI: > { > struct bfin_ppi_regs *reg = info->base; > - bfin_write16(®->control, ppi->ppi_control); > + writew(ppi->ppi_control, ®->control); > break; > } > case PPI_TYPE_EPPI: > { > struct bfin_eppi_regs *reg = info->base; > - bfin_write32(®->control, ppi->ppi_control); > + writel(ppi->ppi_control, ®->control); > break; > } > case PPI_TYPE_EPPI3: > { > struct bfin_eppi3_regs *reg = info->base; > - bfin_write32(®->ctl, ppi->ppi_control); > + writel(ppi->ppi_control, ®->ctl); > break; > } > default: > @@ -195,7 +195,6 @@ static int ppi_stop(struct ppi_if *ppi) > clear_dma_irqstat(info->dma_ch); > disable_dma(info->dma_ch); > > - SSYNC(); > return 0; > } > > @@ -242,9 +241,9 @@ static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params) > if (params->ppi_control & DMA32) > dma32 = 1; > > - bfin_write16(®->control, ppi->ppi_control); > - bfin_write16(®->count, samples_per_line - 1); > - bfin_write16(®->frame, params->frame); > + writew(ppi->ppi_control, ®->control); > + writew(samples_per_line - 1, ®->count); > + writew(params->frame, ®->frame); > break; > } > case PPI_TYPE_EPPI: > @@ -255,13 +254,13 @@ static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params) > || (params->ppi_control & 0x38000) > DLEN_16) > dma32 = 1; > > - bfin_write32(®->control, ppi->ppi_control); > - bfin_write16(®->line, samples_per_line); > - bfin_write16(®->frame, params->frame); > - bfin_write16(®->hdelay, hdelay); > - bfin_write16(®->vdelay, params->vdelay); > - bfin_write16(®->hcount, hcount); > - bfin_write16(®->vcount, params->height); > + writel(ppi->ppi_control, ®->control); > + writew(samples_per_line, ®->line); > + writew(params->frame, ®->frame); > + writew(hdelay, ®->hdelay); > + writew(params->vdelay, ®->vdelay); > + writew(hcount, ®->hcount); > + writew(params->height, ®->vcount); > break; > } > case PPI_TYPE_EPPI3: > @@ -272,15 +271,15 @@ static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params) > || (params->ppi_control & 0x70000) > DLEN_16) > dma32 = 1; > > - bfin_write32(®->ctl, ppi->ppi_control); > - bfin_write32(®->line, samples_per_line); > - bfin_write32(®->frame, params->frame); > - bfin_write32(®->hdly, hdelay); > - bfin_write32(®->vdly, params->vdelay); > - bfin_write32(®->hcnt, hcount); > - bfin_write32(®->vcnt, params->height); > + writel(ppi->ppi_control, ®->ctl); > + writel(samples_per_line, ®->line); > + writel(params->frame, ®->frame); > + writel(hdelay, ®->hdly); > + writel(params->vdelay, ®->vdly); > + writel(hcount, ®->hcnt); > + writel(params->height, ®->vcnt); > if (params->int_mask) > - bfin_write32(®->imsk, params->int_mask & 0xFF); > + writel(params->int_mask & 0xFF, ®->imsk); > if (ppi->ppi_control & PORT_DIR) { > u32 hsync_width, vsync_width, vsync_period; > > @@ -288,10 +287,10 @@ static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params) > * params->bpp / params->dlen; > vsync_width = params->vsync * samples_per_line; > vsync_period = samples_per_line * params->frame; > - bfin_write32(®->fs1_wlhb, hsync_width); > - bfin_write32(®->fs1_paspl, samples_per_line); > - bfin_write32(®->fs2_wlvb, vsync_width); > - bfin_write32(®->fs2_palpf, vsync_period); > + writel(hsync_width, ®->fs1_wlhb); > + writel(samples_per_line, ®->fs1_paspl); > + writel(vsync_width, ®->fs2_wlvb); > + writel(vsync_period, ®->fs2_palpf); > } > break; > } > @@ -313,7 +312,6 @@ static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params) > set_dma_y_count(info->dma_ch, params->height); > set_dma_config(info->dma_ch, dma_config); > > - SSYNC(); > return 0; > } > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html